C3D06060G VRRM = Silicon Carbide Schottky Diode IF (TC=135˚C) = 9.5 A Z-Rec Rectifier ® Qc Features • • • • • • • = 16 nC Package 600-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-263-2 Benefits • • • • • • 600 V Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway AEC-Q101 Qualified and PPAP Capable PIN 1 CASE PIN 2 Applications • • • Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 600W-1200W Motor Drives - Typical Power : 2HP-3HP Part Number Package Marking C3D06060G TO-263-2 C3D06060 Maximum Ratings (TC = 25 ˚C unless otherwise specified) Symbol Value Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Continuous Forward Current 20 9.5 6 A TC=25˚C TC=135˚C TC=155˚C IFRM Repetitive Peak Forward Surge Current 41 27 A TC=25˚C, tP = 10 ms, Half Sine Wave, D=0.3 TC=110˚C, tP=10 ms, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 70 55 A TC=25˚C, tp = 10 mS, Half Sine Wave, D=0.3 TC=110˚C, tp = 10 mS, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 200 A TC=25˚C, tP = 10 µs, Pulse Ptot Power Dissipation 91 39 W TC=25˚C TC=110˚C -55 to +175 ˚C IF TJ , Tstg 1 Parameter Operating Junction and Storage Temperature C3D06060G Rev. F Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.6 1.9 1.8 2.4 V IF = 6 A TJ=25°C IF = 6 A TJ=175°C IR Reverse Current 10 20 50 200 μA VR = 600 V TJ=25°C VR = 600 V TJ=175°C QC Total Capacitive Charge 16 nC VR = 600 V, IF = 6A di/dt = 500 A/μs TJ = 25°C C Total Capacitance 294 27 26 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RθJC Parameter Typ. Unit Thermal Resistance from Junction to Case 1.65 °C/W Typical Performance Forward Characteristics Reverse Characteristics 100 100 11 TJ = 25°C 1010 TJ = 125°C TJ = 175°C 88 7 66 5 44 3 22 70 70 60 60 50 50 40 40 30 30 20 20 TJ = 25°C TJ = 75°C TJ = 125°C TJ = 175°C 10 10 1 00 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1 1.5 2 2.5 3 VF Forward Voltage V Forward Voltage (V)(V) F Figure 1. Forward Characteristics 2 80 80 IR Reverse Current (uA) 9 90 90 TJ = 75°C IR Reverse Current (μA) IF Forward Current (A) IF Forward Current (A) 1212 C3D06060G Rev. F 00 00 200 400 600 800 1000 1200 200 400 600 800 1000 1200 VR Reverse Voltage (V) VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance Capacitance vs. Reverse Voltage 350 350 50 300 300 45 20% Duty* 30% Duty* 50% Duty* 70% Duty* DC 30 25 20 15 C Capacitance (pF) 250 250 35 C Capacitance (pF) IF Peak Forward Current (A) 40 200 200 Series1 150 150 100 100 10 5050 5 0 25 50 75 100 125 150 00 1 1 175 10 100 1000 10 100 1000 VR Reverse (V) VR ReverseVoltage Voltage (V) TC Case Temperature (°C) *Frequency > 1KHz Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 Zth (°C/W) 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 Tim e (s) Figure 5. Transient Thermal Impedance 3 C3D06060G Rev. F 1.E-02 1.E-01 1.E+00 Typical Performance 100 90 Power Dissipation (W) 80 70 60 50 40 30 20 10 0 25 50 75 100 125 150 175 T C Case Temperature (°C) Figure 6. Power Derating Diode Model Diode Model CSD06060 Vf T = VT + If*RT VT= 0.975 + (Tj * -1.0*10-3) RT= 0.09 + (Tj * 0.51*10-3) Note: Tj = Diode Junction Temperature In Degrees Celsius valid from 25°C to 175°C VT 4 C3D06060G Rev. F RT Package Dimensions Package TO-263-2 POS Inches Millimeters Min Max Min Max A 0.17 0.18 4.32 4.57 A1 - 0.01 - 0.25 b 0.028 0.037 0.71 0.94 b2 0.045 0.055 1.15 1.4 c 0.018 0.024 0.46 0.61 c2 0.048 0.055 1.22 1.4 D 0.35 0.37 8.89 9.4 D1 0.315 0.324 8.01 8.23 10.28 E 0.395 0.405 10.04 E1 0.31 0.318 7.88 8.08 e 0.1 BSC. 2.54 BSC. L 0.58 0.62 14.73 15.75 L1 0.09 0.11 2.29 2.79 L2 0.045 0.055 1.15 1.39 L3 0.05 0.07 1.27 1.77 q 0° 8° 0° 8° Note: * Tab “M” may not be present PIN 1 M PIN 2 Recommended Solder Pad Layout TO-263-2 Part Number Package Marking C3D06060G TO-263-2 C3D06060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 C3D06060G Rev. F CASE Notes • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D06060G Rev. F Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power