CLD-CT1120.000 PRODUCT FAMILY DATA SHEET Cree® P4 LED CP41T-RDS/ADS CP41T-RFS/AFS CP41T-RHS/AHS PRODUCT DESCRIPTION FEATURES APPLICATIONS This revolutionary package design • Size (mm): 7.6 x 7.6 • Channel Letter • Color and Typical Dominant Wavelength: Red (628nm) Amber(591nm) • Amusement • Luminous Flux (mlm) CP41T-RDS: (2750-6600) CP41T-RFS: (3300-6600) CP41T-RHS: (3300-6600) CP41T-ADS: (2200-5500) CP41T-AFS: (2200-5500) CP41T-AHS: (2200-6600) • Lead - Free • RoHS Compliant allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical-package design and highcurrent capabilities. The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs green and blue LED materials, which allows designers to match the color of many lighting applications such as vehicle signal WWW.CREE.COM/HB lamps and amusement lighting. Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current Peak Forward Current IF 70 mA Note1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 220 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Note2 Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) Note: 1.A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Symbol Condition Unit Forward Voltage Characteristics Red/Amber Color VF IF = 70 mA V Reverse Current Red/Amber IR VR = 5 V μA Red λD IF = 70 mA nm 620 628 637 Amber λD IF = 70 mA nm 584 591 599 CP41T-RDS (40 degree) Φv IF = 70 mA mlm 2750 4000 CP41T-RFS (70 degree) Φv IF = 70 mA mlm 3300 4500 CP41T-RHS (100 degree) Φv IF = 70 mA mlm 3300 4000 CP41T-ADS/AFS/AHS Φv IF = 70 mA mlm 2200 3200 CP41T-RDS/ADS 2θ½ IF = 70 mA deg CP41T-RFS/AFS 2θ½ IF = 70 mA deg 70 CP41T-RHS/AHS 2θ½ IF = 70 mA deg 100 Dominant Wavelength Luminous Flux Red Amber 50% Power Angle Minimum Typical Maximum 2.6 3.2 100 40 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS FLUX BIN LIMIT (IF = 70 mA) Red Amber CP41T-RDS (40 degree) CP41T-ADS/AFS (40/70 degree) Bin Code Min. (mlm) Max. (mlm) Bin Code Min. (mlm) Max. (mlm) H0 2750 3300 G0 2200 2750 J0 3300 3850 H0 2750 3300 K0 3850 4400 J0 3300 3850 L0 4400 5500 K0 3850 4400 M0 5500 6600 L0 4400 5500 CP41T-RFS/RHS (70/100 degree) CP41T-AHS (100 degree) Bin Code Min. (mlm) Max. (mlm) Bin Code Min. (mlm) Max. (mlm) J0 3300 3850 G0 2200 2750 K0 3850 4400 H0 2750 3300 L0 4400 5500 J0 3300 3850 M0 5500 6600 K0 3850 4400 L0 4400 5500 M0 5500 6600 • Tolerance of measurement of luminous flux is ±15% COLOR BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RE 620 637 A2 584 587 A3 587 590 A4 590 593 A5 593 596 A6 596 599 • Tolerance of measurement of dominant wavelength is ±1 nm VF BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min. (V) Max. (V) Bin Code Min. (V) Max. (V) 24 2.2 2.4 24 2.2 2.4 25 2.4 2.6 25 2.4 2.6 26 2.6 2.8 26 2.6 2.8 27 2.8 3.0 27 2.8 3.0 28 3.0 3.2 28 3.0 3.2 • Tolerance of measurement of VF is ±0.05V. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS ORDER CODE TABLE* Luminous Flux (mlm) Dominant Wavelength Color Kit Number Viewing Angle Red CP41T-RDS-CH0M0EE4 40 Color Kit Number Viewing Angle Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Red CP41T-RFS-CJ0M0EE4 70 3300 6600 RE 620 RE 637 Color Kit Number Viewing Angle Min. Red CP41T-RHS-CJ0M0EE4 100 3300 Color Kit Number Viewing Angle Amber CP41T-ADS-CG0L0264 40 Color Kit Number Viewing Angle Min. Amber CP41T-AFS-CG0L0264 70 2200 Color Kit Number Viewing Angle Min. Amber CP41T-AHS-CG0M0264 100 2200 Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 2750 6600 RE 620 RE 637 Luminous Flux (mlm) Dominant Wavelength Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 6600 RE 620 RE 637 Luminous Flux (mlm) Dominant Wavelength Min. Max. Color Bin 2200 5500 A2 Luminous Flux (mlm) Min. (nm) Color Bin Max. (nm) 584 A6 599 Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 5500 A2 584 A6 599 Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 6600 A2 584 A6 599 Notes: 1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes. Only one flux-bin code and one color-bin code will be shipped on each reel. And single flux-bin code,single color bin-codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS GRAPHS IF (mA) 100.0 2.5 2.0 80.0 1.5 60.0 Red 40.0 1.0 Amber 1.8 2.0 2.2 2.4 2.6 VF(V) 2.8 -60 -50 -40 -30 -20 Amber 0.0 0 20 40 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS Flux VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) Red 0.5 20.0 0.0 (RELATIVE LUMINOUS Flux) -10 0 100% -10 80% -20 60% -30 40% -40 20% (RELATIVE LUMINOUS INTENSITY) Amber -50 Ir(uA) FIG.3 Red & Amber REVERSE CURRENT VS. REVERSE VOLTAGE. IF(mA) 100 0% 300 400 500 Red 600 700 WL(nm) 800 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. CP41T-ADS/RDS 50% Power Angle : 40 (RELATIVE LUMINOUS INTENSITY) 0 1.0 80 60 40 0.5 20 Ta( C) 20 40 60 80 100 0 FIG.5 Red & Amber MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C) 0 0 -90 -60 -30 0 30 60 Angle 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS GRAPHS CP41T-AFS/RFS 50% Power Angle : 70 (RELATIVE LUMINOUS INTENSITY) 0 1.0 CP41T-AHS/RHS 50% Power Angle : 100 (RELATIVE LUMINOUS INTENSITY) 0 1.0 0.5 0.5 0 -90 -60 -30 FIG.7 FAR FIELD PATTERN 0 30 60 Angle 90 0 -90 -60 -30 FIG.8 FAR FIELD PATTERN 0 30 60 Angle 90 The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. CP41T-RDS/ADS: CP41B-RFS/AFS/RHS/AHS: NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree P4 LED CP41T-RDS/ADS CP41T-RFS/RFS CP41T-RHS/AHS PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXXXXX-XXX LOT J OWAXXXXX -XX-XXX QT Y RANK P CS Iv Vf Hu e X XX XX AX XXX XXX XXX X Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9