CLD-CT1086.004 PRODUCT FAMILY DATA SHEET Cree® PLCC4 1-in-1 SMD LED CLM2B-REW/AEW PRODUCT DESCRIPTION FEATURES APPLICATIONS SMD LEDs is packaged in the industry • Size (mm):3.2 x 2.7 • Light Strip standard package. These LEDs have • Color and Typical Dominant Wavelength: Red (624nm) Amber(591nm) • Channel Letter high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these • Architectural Lighting • Luminous Intensity (mcd) CLM2B-REW:(2240 - 5600) CLM2B-AEW:(2800 - 9000) • Lead-Free • RoHS Compliant LEDs ideally suited for channel letter, or general backlighting and illumina- WWW.CREE.COM/HB tion applications. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current IF 70 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 210 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 300 °C/W Junction/Solder Point RTHJS 150 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Unit Forward Voltage Red/Amber VF IF = 50 mA V Reverse Current Red/Amber IR VR = 5 V μA Dominant Wavelength Luminous Intensity Minimum Typical Maximum 2.5 3.0 10 Red λD IF = 50 mA nm 618 624 630 Amber λD IF = 50 mA nm 584 591 599 Red IV IF = 50 mA mcd 2240 3700 Amber IV IF = 50 mA mcd 2800 5000 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW INTENSITY BIN LIMIT (IF = 50 mA) Amber (CLM2B-AEW) Red (CLM2B-REW) Bin Code Min. (mcd) Max. (mcd) 2800 Ya 2800 3550 3550 4500 Bin Code Min. (mcd) Max. (mcd) Xb 2240 Ya 2800 3550 Yb Yb 3550 4500 Z0 4500 5600 5600 A0 5600 7100 B0 7100 9000 Z0 4500 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 50 mA) Red (CLM2B-REW) Amber (CLM2B-AEW) Bin Code Min. (nm) Max. (nm) Bin Code Min. (nm) Max. (nm) RA 618 630 A2 584 587 A3 587 590 A4 590 593 A5 593 596 A6 596 599 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Red CLM2B-REW-CXbZ0AA3 2240 5600 RA 618 RA 630 Red CLM2B-REW-CYaZ0AA3 2800 5600 RA 618 RA 630 Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Amber CLM2B-AEW-CYaB0263 2800 9000 A2 584 A6 599 Amber CLM2B-AEW-CYbB0263 3550 9000 A2 584 A6 599 Luminous Intensity (mcd) Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW GRAPHS (RELATIVE LUMINOUS INTENSITY) IF (mA) 100.0 2.5 80.0 2.0 60.0 1.5 Amber Red 40.0 Red 1.0 Amber 20.0 0.5 0.0 1.8 VF(V) 2.0 2.2 2.6 2.4 0.0 2.8 FORWARD VOLTAGE. -60 -50 -40 -20 -30 40 20 60 IF(mA) 100 80 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. Vr(V) 0.0 (RELATIVE LUMINOUS INTENSITY) -10 0 100% -10 80% -20 60% -30 40% -40 20% Amber 0% 300 -50 Ir(uA) FIG.3 RED&AMBER REVERSE CURRENT 400 500 Red 600 WL(nm) 800 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. VS. REVERSE VOLTAGE. WAVELENGTH. (RELATIVE LUMINOUS INTENSITY) 10 1.0 20 IF(mA) 100 30 Rth j-s=150 C/W 40 80 50 60 60 0.5 40 Rth j-a=300 C/W 70 20 T ( C) 0 0 20 40 60 80 100 FIG.5 RED&AMBER MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 80 90 -1.0 -0.5 0 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 1 in 1 SMD LED CLM2B-REW/AEW PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 700 pcs per reel. CARRIER TAPE P ACK AGE MA RKING TAP E FE ED D IRECTION Label COVER TAPE (TAR-LESREL-01) HUMIDITY INDICATOR H UMIC HECK DESICCANT Label POLYETHYLENE BAG Label A CARTON (240x220x35mm) Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8