Cree® XLamp® XHP70 LEDs Product Description FEATURES Table of Contents Powered by Cree’s groundbreaking SC5 • Available in white, configurable to 6 V Characteristics...............................................2 Technology™ Platform, the XLamp XHP70 Flux Characteristics, EasyWhite® Order or 12 V by PCB layout LED is a member of Cree’s Extreme High • Available in 5-step EasyWhite bins Power (XHP) class of LEDs that redefines at 3000 K to 5000 K CCT, 3-step Flux Characteristics, ANSI White Order lumen density and reliability to radically EasyWhite bins at 2700 K to 5000 K Codes and Bins..............................................6 reduce system costs by up to 40 percent. and 2-step EasyWhite bins at 2700 K Relative Spectral Power Distribution............9 At its maximum current, the XHP70 LED to 4000 K CCT Relative Flux vs. Junction Temperature........9 delivers twice the light output of the XLamp MK-R LED, with similar lumens per watt and without increasing the package footprint. The XHP70 LED also achieves longer ® • Available in ANSI white bins at 3000 K to 7000 K CCT • Available in standard, 70-, 80-, and 90‑minimum CRI options Codes and Bins..............................................3 Electrical Characteristics............................ 10 Relative Flux vs. Current............................. 11 Relative Chromaticity vs Current................ 12 Relative Chromaticity vs Temperature....... 13 lifetime at higher operating temperatures • Binned at 85 °C Typical Spatial Distribution......................... 13 than previous LED technology. The result • Maximum drive current: 4800 mA Thermal Design........................................... 14 is significantly lower thermal, mechanical and optical costs at the system level. (6 V), 2400 mA (12 V) Performance Groups – Luminous Flux..... 15 • Low thermal resistance: 0.9 °C/W Performance Groups – Chromaticity......... 15 • Wide viewing angle: 120° Cree’s Standard White Chromaticity • Unlimited floor life at Regions Plotted on the CIE 1931 Curve..... 19 ≤ 30 ºC/85% RH • Reflow solderable - JEDEC J‑STD‑020C Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions... 22 Cree’s Standard Warm and Neutral White • RoHS‑compliant Kits Plotted on ANSI Standard • UL® recognized component Chromaticity Regions................................. 23 (E349212) CLD-DS114 Rev 1B Product family data sheet Bin and Order-Code Format........................ 24 Reflow Soldering Characteristics............... 25 Notes........................................................... 26 Mechanical Dimensions............................. 27 Electrical Configuration.............................. 29 www.cree.com/Xlamp Tape and Reel.............................................. 29 Packaging.................................................... 30 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® XHP70 LED Characteristics XHP70 LEDs are tested and binned in the 12‑V configuration. See the Mechanical Dimensions section on page 23 for pad layout options. Characteristics Unit Thermal resistance, junction to solder point °C/W 0.9 degrees 120 Temperature coefficient of voltage (6 V)* mV/°C -4.25 Temperature coefficient of voltage (12 V) mV/°C -8.5 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical V Maximum 8000 DC forward current (6 V)* mA 4800 DC forward current (12 V) mA 2400 Reverse voltage V -5 Forward voltage (6 V, @ 2100 mA, 85 °C)* V 5.8 6.2 Forward voltage (12 V, @ 1050 mA, 85 °C) V 11.6 12.4 LED junction temperature °C 150 Note: * Data for the 6‑V configuration is calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® XHP70 LED Flux Characteristics, EasyWhite® Order Codes and Bins The following table provides order codes for XLamp XHP70 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA CRI Nominal CCT Min Typ Minimum Luminous Flux 2-Step 3-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* N4 1710 1965 N2 1590 1827 N2 1590 1827 M4 1485 1707 M2 1380 1586 XHP70A-00-00000D0HM250G K4 1290 1482 XHP70A-00-00000D0UK450G K2 1200 1379 J4 1120 1287 N2 1590 1827 M4 1485 1707 M4 1485 1707 M2 1380 1586 XHP70A-00-00000D0HM245G K4 1290 1482 XHP70A-00-00000D0UK445G K2 1200 1379 J4 1120 1287 Group Order Code Group Order Code 70 80 50G 90 XHP70A-00-00000D0BN450E XHP70A-00-00000D0BN250E 50G XHP70A-00-00000D0HM450G XHP70A-00-00000D0UK250G XHP70A-00-00000D0UJ450G 45E 80 Order Code XHP70A-00-00000D0HN250G 70 4500 K Group 50E 5000 K 90 5-Step 45G 45G XHP70A-00-00000D0BN245E XHP70A-00-00000D0BM445E XHP70A-00-00000D0HM445G XHP70A-00-00000D0UK245G XHP70A-00-00000D0UJ445G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® XHP70 LED Flux Characteristics, EasyWhite® Order Codes and Bins - Continued CRI Nominal CCT Min Typ Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* N2 1590 1827 2-Step Group Order Code 3-Step Group Order Code 70 90 M4 1485 1707 M4 1485 1707 M2 1380 1586 XHP70A-00-00000D0HM240H K4 1290 1482 XHP70A-00-00000D0UK440H K2 1200 1379 J4 1120 1287 N2 1590 1827 M4 1485 1707 M4 1485 1707 M2 1380 1586 K4 1290 1482 XHP70A-00-00000D0HK435H XHP70A-00-00000D0HK435G K4 1290 1482 XHP70A-00-00000D0UK435H XHP70A-00-00000D0UK435G K2 1200 1379 40H 40H XHP70A-00-00000D0HM440H XHP70A-00-00000D0UK240H 40G 3500 K 90 40G XHP70A-00-00000D0UK240G XHP70A-00-00000D0UJ440G XHP70A-00-00000D0HM435H 35H XHP70A-00-00000D0UK235H J4 1120 1287 XHP70A-00-00000D0UJ435H J2 1040 1195 XHP70A-00-00000D0UJ235H XHP70A-00-00000D0BM440E XHP70A-00-00000D0HM240G 35E XHP70A-00-00000D0HM235H XHP70A-00-00000D0BN240E XHP70A-00-00000D0UK40G XHP70A-00-00000D0UJ440H 35H Order Code XHP70A-00-00000D0HM440G 70 80 Group 40E 80 4000 K 5-Step XHP70A-00-00000D0BN235E XHP70A-00-00000D0BM435E XHP70A-00-00000D0HM435G 35G 35G XHP70A-00-00000D0HM235G XHP70A-00-00000D0UK235G XHP70A-00-00000D0UJ435G XHP70A-00-00000D0UJ235G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® XHP70 LED Flux Characteristics, EasyWhite® Order Codes and Bins - Continued CRI Nominal CCT Min Typ Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* M4 1485 1707 2-Step Group Order Code 3-Step Group Order Code 70 80 80 M2 1380 1586 M4 1485 1707 M2 1380 1586 K4 1290 1482 XHP70A-00-00000D0HK430H XHP70A-00-00000D0HK430G K2 1200 1379 XHP70A-00-00000D0UK230H XHP70A-00-00000D0UK230G J4 1120 1287 J2 1040 1195 XHP70A-00-00000D0UJ230H XHP70A-00-00000D0UJ230G M2 1380 1586 XHP70A-00-00000D0HM227H XHP70A-00-00000D0HM227G K4 1290 1482 K2 1200 1379 XHP70A-00-00000D0HK227H XHP70A-00-00000D0HK227G J4 1120 1287 XHP70A-00-00000D0UJ427H XHP70A-00-00000D0UJ427G J2 1040 1195 H4 970 1115 XHP70A-00-00000D0HM430H 30H 30H 27H 2700 K 90 Group 30E 3000 K 90 5-Step 27H XHP70A-00-00000D0HM230H XHP70A-00-00000D0UJ430H XHP70A-00-00000D0HK427H XHP70A-00-00000D0UJ227H XHP70A-00-00000D0UH427H Order Code XHP70A-00-00000D0BM430E XHP70A-00-00000D0BM230E XHP70A-00-00000D0HM430G 30G 30G 27G 27G XHP70A-00-00000D0HM230G XHP70A-00-00000D0UJ430G XHP70A-00-00000D0HK427G XHP70A-00-00000D0UJ227G XHP70A-00-00000D0UH427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® XHP70 LED Flux Characteristics, ANSI White Order Codes and Bins The following table provides order codes for XLamp XHP70 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA Nominal CCT 7000 K CRI Chromaticity Regions 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U Minimum Luminous Flux Min Typ 0 68 70 80 90 0 6500 K 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 68 70 80 90 0 70 6500 K 1A, 1B, 1C, 1D 80 90 68 Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C* Order Code N4 1710 1965 N2 1590 1827 XHP70A-00-0000-0D00N40DT XHP70A-00-0000-0D00N20DT N4 1710 1965 XHP70A-00-0000-0D0BN40DT N2 1590 1827 XHP70A-00-0000-0D0BN20DT N2 1590 1827 XHP70A-00-0000-0D0HN20DT M4 1485 1707 XHP70A-00-0000-0D0HM40DT M2 1380 1586 XHP70A-00-0000-0D0UM20DT K4 1290 1482 XHP70A-00-0000-0D0UK40DT K2 1200 1379 XHP70A-00-0000-0D0UK20DT N4 1710 1965 XHP70A-00-0000-0D00N40CB N2 1590 1827 XHP70A-00-0000-0D00N20CB N4 1710 1965 XHP70A-00-0000-0D0BN40CB N2 1590 1827 XHP70A-00-0000-0D0BN20CB N2 1710 1965 XHP70A-00-0000-0D0HN20CB M4 1590 1827 XHP70A-00-0000-0D0HM40CB M2 1380 1586 XHP70A-00-0000-0D0UM20CB K4 1290 1482 XHP70A-00-0000-0D0UK40CB K2 1200 1379 XHP70A-00-0000-0D0UK20CB N4 1710 1965 XHP70A-00-0000-0D00N40E1 N2 1590 1827 XHP70A-00-0000-0D00N20E1 N4 1710 1965 XHP70A-00-0000-0D0BN40E1 N2 1590 1827 XHP70A-00-0000-0D0BN20E1 N2 1710 1965 XHP70A-00-0000-0D0HN20E1 M4 1590 1827 XHP70A-00-0000-0D0HM40E1 M2 1380 1586 XHP70A-00-0000-0D0UM20E1 K4 1290 1482 XHP70A-00-0000-0D0UK40E1 K2 1200 1379 XHP70A-00-0000-0D0UK20E1 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® XHP70 LED Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT 6000 K CRI Chromaticity Regions 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U Minimum Luminous Flux Min Typ 0 68 70 80 90 0 68 70 5700 K 2A, 2B, 2C, 2D 80 90 0 68 70 5000 K 3A, 3B, 3C, 3D 80 90 0 70 4500 K 4A, 4B, 4C, 4D 80 90 68 Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C* Order Code N4 1710 1965 XHP70A-00-0000-0D00N40DV N2 1590 1827 XHP70A-00-0000-0D00N20DV N4 1710 1965 XHP70A-00-0000-0D0BN40DV N2 1590 1827 XHP70A-00-0000-0D0BN20DV N2 1590 1827 XHP70A-00-0000-0D0HN20DV M4 1485 1707 XHP70A-00-0000-0D0HM40DV M2 1380 1586 XHP70A-00-0000-0D0UM20DV K4 1290 1482 XHP70A-00-0000-0D0UK40DV K2 1200 1379 XHP70A-00-0000-0D0UK20DV N4 1710 1965 XHP70A-00-0000-0D00N40E2 N2 1590 1827 XHP70A-00-0000-0D00N20E2 N4 1710 1965 XHP70A-00-0000-0D0BN40E2 N2 1590 1827 XHP70A-00-0000-0D0BN20E2 N2 1590 1827 XHP70A-00-0000-0D0HN20E2 M4 1485 1707 XHP70A-00-0000-0D0HM40E2 M2 1380 1586 XHP70A-00-0000-0D0UM20E2 K4 1290 1482 XHP70A-00-0000-0D0UK40E2 K2 1200 1379 XHP70A-00-0000-0D0UK20E2 N4 1710 1965 XHP70A-00-0000-0D00N40E3 N2 1590 1827 XHP70A-00-0000-0D00N20E3 N4 1710 1965 XHP70A-00-0000-0D0BN40E3 N2 1590 1827 XHP70A-00-0000-0D0BN20E3 N2 1590 1827 XHP70A-00-0000-0D0HN20E3 M4 1485 1707 XHP70A-00-0000-0D0HM40E3 M2 1380 1586 XHP70A-00-0000-0D0HM20E3 K4 1200 1482 XHP70A-00-0000-0D0UK40E3 K2 1200 1379 XHP70A-00-0000-0D0UK20E3 J4 1120 1287 XHP70A-00-0000-0D0UJ40E3 N2 1590 1827 XHP70A-00-0000-0D00N20E4 M4 1485 1707 XHP70A-00-0000-0D00M40E4 N2 1590 1827 XHP70A-00-0000-0D0BN20E4 M4 1485 1707 XHP70A-00-0000-0D0BM40E4 M4 1485 1707 XHP70A-00-0000-0D0HM40E4 M2 1380 1586 XHP70A-00-0000-0D0HM20E4 K4 1200 1482 XHP70A-00-0000-0D0UK40E4 K2 1200 1379 XHP70A-00-0000-0D0UK20E4 J4 1120 1287 XHP70A-00-0000-0D0UJ40E4 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® XHP70 LED Flux Characteristics, ANSI White Order codes and Bins - Continued Nominal CCT CRI Chromaticity Regions Min Typ 0 68 70 4000 K 5A, 5B, 5C, 5D Minimum Luminous Flux 80 90 3500 K 6A, 6B, 6C, 6D 70 3000 K 7A, 7B, 7C, 7D 70 Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C* Order Code N2 1590 1827 XHP70A-00-0000-0D00N20E5 M4 1485 1707 XHP70A-00-0000-0D00M40E5 N2 1590 1827 XHP70A-00-0000-0D0BN20E5 M4 1485 1707 XHP70A-00-0000-0D0BM40E5 M4 1485 1707 XHP70A-00-0000-0D0HM40E5 M2 1380 1586 XHP70A-00-0000-0D0HM20E5 K4 1200 1482 XHP70A-00-0000-0D0UK40E5 K2 1200 1379 XHP70A-00-0000-0D0UK20E5 J4 1120 1287 XHP70A-00-0000-0D0UJ40E5 N2 1590 1827 XHP70A-00-0000-0D0BN20E6 M4 1485 1707 XHP70A-00-0000-0D0BM40E6 M4 1485 1707 XHP70A-00-0000-0D0BM40E7 M2 1380 1586 XHP70A-00-0000-0D0BM20E7 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® XHP70 LED Relative Spectral Power Relative Spectral Power Distribution 100% Relative Radiant Power 80% 60% 6500 K, 68 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Relative Flux vs. Junction Temperature Temperature Reference condition: 6 V, IF = 2100 mA; 12 V, IF = 1050 mA 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® XHP70 LED Electrical Characteristics (TJ = 85 °C) 4800 Forward Current (mA) 4000 3200 6V 2400 1600 800 0 5.50 5.75 6.00 6.25 6.50 Forward Voltage (V) Electrical Characteristics (Tj = 85°C) 2400 Forward Current (mA) 2000 1600 1200 12 V 800 400 0 11.0 11.5 12.0 12.5 13.0 Forward Voltage (V) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® XHP70 LED Relative Flux vs. Current (TJ = 85 °C) 200% 180% Relative Luminous Flux 160% 140% 120% 100% 6V 80% 60% 40% 20% 0% 0 800 1600 2400 3200 4000 4800 Forward Current (mA) Relative Intensity vs. Current (Tj = 85°C) 200% Relative Luminous Flux 180% 160% 140% 120% 100% 12 V 80% 60% 40% 20% 0% 0 400 800 1200 1600 2000 2400 Forward Current (mA) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® XHP70 LED Relative Chromaticity vs Current (Warm White) 0.020 0.016 0.012 6V 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 800 1600 2400 3200 4000 4800 Current (mA) Relative Chromaticity Vs. Current, WW 0.020 0.016 0.012 12 V 0.008 0.004 ΔCCx 0.000 ΔCCy -0.004 -0.008 -0.012 -0.016 -0.020 0 400 800 1200 1600 2000 2400 Current (mA) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® XHP70 LED Relative Chromaticity vs Temperature (Warm White) Relative Chromaticity Temperature Reference condition: 6 V, IF Vs. = 2100 mA; 12 V,WW IF = 1050 mA 0.020 0.016 0.012 0.008 0.004 0.000 ΔCCx -0.004 ΔCCy -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tj (°C) Typical Spatial Distribution Typical Spatial Radiation Pattern Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA; 12 V, IF = 1050 mA 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® XHP70 LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 5000 Maximum Current (mA) 4500 6V 4000 3500 3000 2500 2000 Rj-a = 1°C/W 1500 Rj-a = 2°C/W 1000 Rj-a = 3°C/W 500 0 Rj-a = 4°C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Thermal Design 2500 Maximum Current (mA) 2250 12 V 2000 1750 1500 1250 1000 Rj-a = 1°C/W 750 Rj-a = 2°C/W 500 Rj-a = 3°C/W 250 0 Rj-a = 4°C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® XHP70 LED Performance Groups – Luminous Flux (TJ = 85 °C) XLamp XHP70 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Min. Luminous Flux Max. Luminous Flux H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 K4 1290 1380 M2 1380 1485 M4 1485 1590 N2 1590 1710 N4 1710 1830 P2 1830 1965 Performance Groups – Chromaticity XLamp XHP70 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Bin Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® XHP70 LED Performance Groups – Chromaticity (continued) EasyWhite Color Temperatures – 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 45G 4500 K 0.3611 0.3658 0.00852 0.00330 61.5 40G 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis Bin Code CCT 50G Center Point EasyWhite Color Temperatures – 5-Step Ellipse Center Point Bin Code CCT 50E 5000 K x y a b Rotation Angle (°) 0.3447 0.3553 0.01400 0.00520 65.0 45E 4500 K 0.3611 0.3658 0.01420 0.00550 61.5 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 35E 3500 K 0.4073 0.3917 0.01545 0.00690 54.0 30E 3000 K 0.4338 0.4030 0.01390 0.00680 53.2 ANSI White Bins CCT Bin Code 0A0 0B0 7000 K 0C0 0D0 ANSI White Bins x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 CCT Bin Code 0R0 ANSI White Bins x y 0.2980 0.2880 0.2950 0.2970 0.3009 0.3042 CCT Bin Code 1A0 x y 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3009 0.3042 0.3037 0.2937 0.3068 0.3113 0.2920 0.3060 0.2895 0.3135 0.3028 0.3304 0.2895 0.3135 0.2870 0.3210 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3130 0.3290 0.2984 0.3133 0.2962 0.3220 0.3048 0.3207 0.2984 0.3133 0.2962 0.3220 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3205 0.3481 0.3028 0.3304 0.3005 0.3415 0.3213 0.3373 0.3048 0.3207 0.3028 0.3304 0.3130 0.3290 0S0 7000 K 0T0 1B0 7000 K 1C0 0.2984 0.3133 0.3037 0.2937 0.3130 0.3290 0.3048 0.3207 0.3009 0.3042 0.3213 0.3373 0.3068 0.3113 0.3068 0.3113 0.3221 0.3261 0.3009 0.3042 0.3093 0.2993 0.3144 0.3186 0U0 1D0 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® XHP70 LED Performance Groups – Chromaticity (continued) ANSI White Bins CCT Bin Code 1R0 1S0 7000 K 1T0 1U0 ANSI White Bins x y 0.3068 0.3113 CCT 0.3144 0.3186 Bin Code 2A0 ANSI White Bins x y 0.3215 0.3350 CCT 0.3290 0.3417 Bin Code 2R0 x y 0.3222 0.3243 0.3290 0.3300 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 0.3093 0.2993 0.3222 0.3243 0.3231 0.3120 0.3005 0.3415 0.3207 0.3462 0.3196 0.3602 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0.3099 0.3509 0.3196 0.3602 0.3205 0.3481 0.3115 0.3391 2B0 6000 K 2C0 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3417 2S0 6000 K 2T0 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3290 0.3538 0.3144 0.3186 0.3290 0.3417 0.3290 0.3300 0.3221 0.3261 0.3371 0.3490 0.3366 0.3369 0.3231 0.3120 0.3366 0.3369 0.3361 0.3245 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 2D0 ANSI White Bins CCT Bin Code 3A0 3B0 5000 K 3C0 3D0 2U0 ANSI White Bins x y CCT Bin Code x y .3371 .3451 .3490 0.3530 0.3597 .3554 0.3615 .3440 .3427 0.3659 0.3512 0.3465 .3366 .3369 0.3515 0.3487 .3376 .3616 0.3548 0.3736 .3463 .3687 0.3641 0.3804 .3451 .3554 0.3530 0.3597 .3371 .3490 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 .3451 .3554 .3533 .3620 .3515 .3487 .3440 .3427 4A0 4B0 4500 K 4C0 4D0 0.3533 0.362 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3615 0.3659 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3590 0.3521 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® XHP70 LED Performance Groups – Chromaticity (continued) ANSI White Bins CCT Bin Code 5A0 5B0 4000 K 5C0 5D0 ANSI White Bins x y .3670 .3578 .3702 .3722 CCT Bin Code 6A0 ANSI White Bins x y .3889 .3690 .3941 .3848 CCT Bin Code 7A0 x y .4147 .3814 .4221 .3984 .3825 .3798 .4080 .3916 .4342 .4028 .3783 .3646 .4017 .3751 .4259 .3853 .3702 .3722 .3941 .3848 .4221 .3984 .3736 .3874 .3869 .3958 .3825 .3798 .3825 .3798 6B0 3500 K .3996 .4015 .4146 .4089 .4080 .3916 .4080 .3916 .4089 .4165 .4221 .3984 .4165 .4212 .4342 .4028 .4342 .4028 .3869 .3958 .4044 .3950 .3875 .3783 .3646 .4017 .3751 .4259 .3853 .3825 .3798 .4080 .3916 .4342 .4028 .3950 .3875 .4221 .3984 .4465 .4071 .3898 .3716 .4147 .3814 .4373 .3893 6D0 .4146 3000 K .4299 .4430 .4006 6C0 .4299 7B0 7C0 7D0 .4430 .4212 .4562 .4260 .4465 .4071 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® XHP70 LED Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 0.37 6500 K 2T 0.36 2S CCy 0.35 2C 1T 8000 K 2B 1S 0.34 0T 0.33 0S 0.32 0B 0.31 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 0.30 2A 1B 0C 2D 1C 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® XHP70 LED Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve - Continued ANSI Neutral White and ANSI Warm White 0.45 0.44 2700 K 3000 K 0.43 0.42 3500 K 0.41 4000 K 6C 0.40 CCy 7C 7B 0.39 5000 K 0.38 4C 0.37 3C 3B 3D 0.35 4B 7D 7A 5C 6D 5B 5700 K 0.36 6B 4500 K 5D 6A 5A ANSI C78.377A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® XHP70 LED Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve - Continued 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step EasyWhite 3-Step 0.42 3500 K EasyWhite 2-Step 0.41 2700 K 3000 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 21 XLamp ® XHP70 LED Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K 0.37 5700 K 0.37 6500 K CB 2C 1T 8000 K 0.34 0T 0C 0A ANSI C78.377A 2R 1U 0D 0S 0.32 0B 1R 0A ANSI C78.377A 1U 1R 0U 0.36 0.30 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.36 0.28 0.35 0R 0.29 0.29 2U 2R 1A 0.30 0.29 0.28 2A 1D 0D 0R CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 DV 6500 K 0.36 0.36 2C 8000 K 0A 0R 1R 0U CCx 0.36 0.35 0.34 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 ANSI C78.377A 2R 1U 0R 0.29 0.29 2U 1A 0D 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 1D 0.33 0A CCy 1U 3R 2A 1B 0.32 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2D 1C 0.31 0C 0B 1D 2C 2B 1S 0.30 0S 0.32 2A 1B 3B 2S 1T 8000 K 0.34 0.29 0T 0.33 2D 1C 2T E1 0.35 2B 1S 3S 6500 K 2T 1T 0.34 5700 K 0.37 2S 0.35 5000 K 0.39 5700 K 0.37 CCy 2D 1C 1B 0C 0.31 0U 0.30 0T 0.33 2U 1D 1A 2B 0.34 0B 0.31 2A 2C 1T 1S 0.33 0S 0.32 2D 1C 1B DT 8000 K 0.34 0.32 0.33 2S 0.35 2B 1S 2T 0.36 0.31 0.35 6500 K 2T 2S CCy 0.36 CCy 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 0.31 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22 XLamp ® XHP70 LED Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.45 0.44 2700 K 3000 K 0.43 E7 0.42 3500 K 4000 K CCy 0.40 0.39 5000 K 0.38 E4 4B 3C 0.36 3B 3D 0.35 7B 6C 6B 7D 7A 5C 6D 5B 4C E3 0.37 E5 4500 K 7C E6 0.41 6A ANSI C78.377A 5D 5A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 23 XLamp ® XHP70 LED Bin and Order-Code Format Bin codes and order codes for XHP70 LEDs are configured in the following manner: Order Code Bin Code Series XHP70A = XHP70 Series XHP70A = XHP70 Internal code Chromaticity group Minimum luminous flux group Vf Class D = 6-V/12-V configurable Chromaticity group CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum SSSSSS-BD-GGGG-HJKLMMNNN CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Vf Class D = 6-V/12-V configurable Configuration B = Internal code D = Reel size SSSSSS-E-NNN-MMM-JK-L-PP Internal code Voltage performance group Luminous flux group Internal code Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 24 XLamp ® XHP70 LED Reflow Soldering Characteristics In testing, Cree has found XLamp XHP70 LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 25 XLamp ® XHP70 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP70 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 26 XLamp ® XHP70 LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. All dimensions are ±.13 mm unless otherwise indicated. 6.70 6.70 7.00 7.00 .70 .73 .73 7.00 Top View .73 .73 .70 .70 .70 3.13 6.70 .70 6.70 3.90 .70 .70 6.70 REF. 6.70 REF. 6.70 6.70 3.90 .70 3.13 .50 6.76 3.13 6.76 REF. .50 .50 .50 6.76 6.76 3.76 4.49 PRIMARY Bottom View 4.49 .50 6.76 REF. 6.76 6.76 6.76 .25 6.76 .50 Anode Side 3.13 3.13 Anode Side R3.76 1.29 .70 .70 1.24 6.70 .70 .70 .70 .70 .25 3.13 0 .50 .50 ALTERNATIVEALTERNATIVE .70 .70 .70 .25 3.13 3.13 6.76.50 6.76 6.76 6.76 .25 3.13 1.29 .70 .70 .70 6.70 STEN RECOMMENDEDRECOMMENDED STENCIL PATTERN AREA I (HATCHED AREA(HATCHED IS OPENING) 6v/1 6v/12v 3.13 .25 .50 1.29 1.29 .70 6.70 1.29 6.70 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 RECOMMENDED STENCIL STENCIL PATTERN Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks RECOMMENDED of UL LLC. PATTERN RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 12v 12v (HATCHED AREA IS OPENING) (HATCHED AREA IS OPENING) 6v/12v 6v/12v 1. 1.29 6.70 .70 .50 3.13 1.29 1.24 .70 .70 .25 Alternate Bottom View PRIMARY As shown in these bottom views, thermal PCB SOLDER PAD PCB SOLDER PAD RECOMMENDEDRECOMMENDED PCB SOLDER PAD RECOMMENDEDRECOMMENDED PCB SOLDER PAD pad is6velectrically isloated 12v 6v 12v 6.70 .25 .25 3.13 6.76 .70 .70 .70 .70 1.24 1.24 Cathode Side .70 .70 Cathode Side 3.90 3.90 PRIMARY Side View 6.70 .70 PRIMARY .50 4.49 4.49 .70 6.70 3.90 R3.76 R3.76 .70 .506.76 6.76 3.90 3.13 3.13 7.00 .70 .70 .70 27 7.00 6.76 .50 7.00 6.76 .50 R3.76 XLamp ® XHP70 LED R3.76 PRIMARY 4.49 PRIMARY 4.49 Mechanical Dimensions - Continued 6.70 .70 .70 .73 .70 3.90 .70 .70 .70 6.70 6.70 .70 3.90 3.90 1.24 6.70 .70 .70 .70 6.70 6.70 REF. 1.2 .70 .70 .25 .70 .70 .25 3 3.13 3.13 3.13 .50 .50 6.76 .50 6.76 6.76 6.76 .25 .50 6.76 REF. .50 6.76 3.13 6.76 6.76 .25 1.29 3.13 1.29 1.29 R3.76 .70 6.70 .70 6. .70 RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) PRIMARY RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD RECOMMENDED ALTERNATIVE 4.49 6v/12v (HATCHED AR 6v RECOMMENDED 12v RECOMMENDED Recommended PCB Solder Pad 6 V Configuration Recommended PCB PCB Solder Pad PCB SOLDER PAD SOLDER PAD 12 V Configuration 12v to anode and cathode and is (thermal pad is electrically isolated) 6v (thermal pad is connected .70 not electrically isolated) 1.24 6.70 .70 .70 .70 .70 .25 3.13 3.13 .50 .50 6.76 6.76 .25 .50 3.13 1.29 1.29 .70 .70 RECOMMENDED PCB SOLDER PAD 12v 6.70 RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) Recommended Stencil Pattern 6v/12v 6 V & 12 V Configurations (shaded area is open) Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 28 POSITIVE A NEGATIVE B XLamp ® XHP70 LED Electrical Configuration 12 V 6V SOLDER PAD LINK NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B POSITIVE A NEGATIVE B 6-V Configuration 6 12-V Configuration 6 5 4 5 4 3 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATIONCONTAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 6V 2 1 REVISONS Tape and Reel D 3 2 REV DESCRIPTION B REVERSED POLARITY IN VIEW R REV BY DATE B DC 1/6/15 All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D NEGATIVE A POSITIVE A All dimensions are ±.13 mm unless otherwise indicated. POSITIVE B DESCRIPTION APP'D REVERSED POLARIT D NEGATIVE B 1.5± .1 1.5± .1 END User Feed Direction User Feed Direction 12±.1 4±.10 CATHODE SIDE END 12±.1 4±.10 1.75 ±.10 CATHODE START SIDE 16 +.3 -.0 C C 4.6 ANODE SIDE ANODE SIDE C 7.4 0.36 Leader 420mm (min) of empty pockets sealed with tape (40 pockets min.) Loaded Pockets Leader (1000Lamps) 420mm (min) of empty pockets sealed with tape (40 pockets min.) Trailer Loaded Pockets 180mm (min) of empty pockets (1000Lamps) sealed with tape (100 pockets min.) Trailer 180mm (min) of empty pockets sealed with tape (100 pockets min.) START User Feed Direction User Feed Direction B B B 13mm 13mm DATE DRAWN BY A A 13 " 13 " THIRD ANGLE PROJECTION 6 5 6 4 5 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH: 1.6 3 4 DATE DRAWN BY D. CRONIN CHECK 12/9/14 DATE -- -- APPROVED DATE TITLE -- ANGLE PROJECTION -THIRD MATERIAL -- SIZE FINAL PROTECTIVE FINISH -2 SCALE 3 UNLESS OTHERWISE SPECIFIED D. CRONIN DIMENSIONS ARE IN 4600 Silicon Drive CHECK MILLIMETERS AND AFTER FINISH. Durham, N.C 27703 -TOLERANCE UNLESS SPECIFIED: Phone (919) 313-5300 .XX ± .25 APPROVED Fax (919) 313-5558 .XXX ± .125 -X° ± .5 ° FOR SHEET METAL PARTS ONLYSPEC XHP70 LOADING 12/9/14 DATE -DATE A -- TITLE MATERIAL .X ± .XX ± .XXX ± DRAWING NO. 1.5 .75 .25 1.6 3.000 -- SIZE REV. FINAL PROTECTIVE FINISH ± .5 ° 2402-00056 C SURFACEX°FINISH: SHEET 1 B -- OF 1 /1 2 Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 29 SCALE C XLamp ® XHP70 LED Packaging Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2014-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and SC5 Technology™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 30