Cree® XLamp® CXA1310 LED Product Description features The XLamp® CXA1310 LED is Cree’s • Available in 4-step, 3‑step and 2-step Table of Contents Characteristics.............................................2 newest High Density (HD) LED array, EasyWhite bins at 2700 K, 3000 K, Operating Limits...........................................3 featuring a 6‑mm optical source and 3500 K, 4000 K and 5000 K and Flux Characteristics, EasyWhite® Order enabling lighting manufacturers to 4-step EasyWhite bins at 5700 K and Codes and Bins - 18 V..................................4 create a new generation of products 6500 K CCT Flux Characteristics, ANSI White Order that delivers the same intensity and light quality as 20‑W ceramic metal halide (CMH) at up to 50 percent lower power. The new HD class of CXA arrays provide unrivaled lumen density that can reduce system cost for the next generation of LED spotlights. The CX Family LED Design Guide provides basic information on the requirements to use the CXA1310 LED successfully in luminaire designs. ® • Available in ANSI white bins at Codes and Bins - 18 V..................................6 4000 K, 5000 K, 5700 K and 6500 K Flux Characteristics, EasyWhite® Order CCT Codes and Bins - 36 V..................................7 • Available in 70-, 80- and 93‑minimum CRI options • Forward voltage options: 18‑V class & 36‑V class Flux Characteristics, ANSI White Order Codes and Bins - 36 V..................................9 Relative Spectral Power Distribution....... 10 Electrical Characteristics.......................... 11 • 85 °C binning and characterization Relative Luminous Flux............................. 12 • Maximum drive current: 1050 mA Typical Spatial Distribution....................... 14 (18 V), 525mA (36 V) • 115° viewing angle, uniform chromaticity profile Performance Groups - Brightness........... 14 Performance Groups - Chromaticity........ 15 Cree EasyWhite® Bins Plotted on the • Top-side solder connections 1931 CIE Color Space............................... 18 • Thermocouple attach point Cree ANSI White Bins Plotted on the • NEMA SSL-3 2011 standard flux bins 1931 CIE Color Space............................... 18 • RoHS- and REACh‑compliant Bin and Order Code Formats.................... 19 • UL® recognized component Mechanical Dimensions........................... 19 (E349212) CLD-DS87 Rev 3C Product family data sheet Thermal Design......................................... 20 Notes......................................................... 22 www.cree.com/Xlamp Packaging.................................................. 23 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® CXA1310 LED Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Unit degrees Minimum Typical Maximum 115 V 8000 DC forward current (18 V) mA 1050* DC forward current (36 V) mA 525* Reverse current mA 0.1 Forward voltage (18 V, @ 700 mA, 85 °C) V Forward voltage (18 V, @ 700 mA, 25 °C) V Forward voltage (36 V, @ 350 mA, 85 °C) V Forward voltage (36 V, @ 350 mA, 25 °C) V * 17.8 21 35.6 42 Refer to the Operating Limits section. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® CXA1310 LED Operating Limits The maximum current rating of the CXA1310 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 19 for the location of the Tc measurement point. CXA1310-18V 1100 1000 900 800 If (mA) 700 600 18 V 500 400 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) CXA1310-36V 600 500 If (mA) 400 36 V 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® CXA1310 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 700 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1310 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K2 1200 1344 K4 1290 1445 J4 1120 1255 2-Step Group Order Code 3-Step Group Order Code 75 4-Step Group 65F 6500 K 80 70 --- 65F 70 70 80 CXA1310-0000000F0HK265F K2 1200 1344 CXA1310-0000000F00K257F K4 1290 1445 CXA1310-0000000F00K457F J4 1120 1255 CXA1310-0000000F0HJ457F K2 1200 1344 K2 1200 1344 75 57F --- 57F 75 50H CXA1310-0000000F00K250H K4 1290 1445 CXA1310-0000000F00K450H J4 1120 1255 CXA1310-0000000F0HJ450H K2 1200 1344 J4 1120 1255 --- 50H 75 40H CXA1310-0000000F0HK250H 1200 1344 CXA1310-0000000F00K240H J4 1120 1255 CXA1310-0000000F0HJ440H K2 1200 1344 CXA1310-0000000F0HK240H J2 1040 1165 CXA1310-0000000F00J235H J4 1120 1255 G2 780 881 --- 40H --- 35H 95 35H G4 840 941 50F 50G CXA1310-0000000F0HJ440G CXA1310-0000000F0HK240G CXA1310-0000000F00J440H K2 3500 K 93 CXA1310-0000000F0HJ465F 1344 4000 K 80 CXA1310-0000000F00K465F 1200 5000 K 80 CXA1310-0000000F00K265F K2 5700 K 80 Order Code CXA1310-0000000F00J435H CXA1310-0000000F0YG235H CXA1310-0000000F0YG435H 50F 40F 40G 35G 35G CXA1310-0000000F0HJ440G CXA1310-0000000F0HK240G CXA1310-0000000F00J235G CXA1310-0000000F00J435G CXA1310-0000000F0YG235G CXA1310-0000000F0YG435G 40F 35F 35F CXA1310-0000000F0HK257F CXA1310-0000000F00K250F CXA1310-0000000F00K450F CXA1310-0000000F0HJ450F CXA1310-0000000F0HK250F CXA1310-0000000F00J440F CXA1310-0000000F00K240F CXA1310-0000000F0HJ440F CXA1310-0000000F0HK240F CXA1310-0000000F00J235F CXA1310-0000000F00J435F CXA1310-0000000F0YG235F CXA1310-0000000F0YG435F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® CXA1310 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 700 mA, TJ = 85 °C) - Continued Nominal CCT CRI Minimum Luminous Flux Min Typ 80 --- Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J2 1040 1165 2-Step Group 30H 80 1120 1255 CXA1310-0000000F00J430H G2 780 881 CXA1310-0000000F0YG230H G4 840 941 CXA1310-0000000F0YG430H H4 970 1086 CXA1310-0000000F00H427H J2 1040 1165 F4 730 831 95 30H --- 27H 2700 K 93 CXA1310-0000000F00J230H J4 3000 K 93 Order Code 95 27H G2 780 881 CXA1310-0000000F00J227H CXA1310-0000000F0YF427H CXA1310-0000000F0YG227H 3-Step Group 30G 30G 27G 27G Order Code CXA1310-0000000F00J230G CXA1310-0000000F00J430G CXA1310-0000000F0YG230G CXA1310-0000000F0YG430G CXA1310-0000000F00H427G CXA1310-0000000F00J227G CXA1310-0000000F0YF427G CXA1310-0000000F0YG227G 4-Step Group 30F 30F 27F 27F Order Code CXA1310-0000000F00J230F CXA1310-0000000F00J430F CXA1310-0000000F0YG230F CXA1310-0000000F0YG430F CXA1310-0000000F00H427F CXA1310-0000000F00J227F CXA1310-0000000F0YF427F CXA1310-0000000F0YG227F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® CXA1310 LED Flux Characteristics, ANSI White Order Codes and Bins - 18 V (If = 700 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1310 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). Nominal CCT CRI Minimum Luminous Flux Min Typ 70 75 80 --- 70 75 80 --- 70 75 80 --- 70 75 6500 K 5700 K 5000 K 4000 K Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 J4 1120 1255 K2 1200 1344 Chromaticity Regions 1A0, 1B0, 1C0, 1D0, 65F 1A0, 1B0, 1C0, 1D0, 65F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 2D0, 57F 3A0, 3B0, 3C0, 3D0, 50F 3A0, 3B0, 3C0, 3D0, 50F 5A0, 5B0, 5C0, 5D0, 40F Order Code CXA1310-0000-000F00K20E1 CXA1310-0000-000F00K40E1 CXA1310-0000-000F0HJ40E1 CXA1310-0000-000F0HK20E1 CXA1310-0000-000F00K20E2 CXA1310-0000-000F00K40E2 CXA1310-0000-000F0HJ40E2 CXA1310-0000-000F0HK20E2 CXA1310-0000-000F00K20E3 CXA1310-0000-000F00K40E3 CXA1310-0000-000F0HJ40E3 CXA1310-0000-000F0HK20E3 CXA1310-0000-000F00J40E5 CXA1310-0000-000F00K20E5 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® CXA1310 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 350 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1310 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). Nominal CCT CRI Min 70 Minimum Luminous Flux Typ Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K2 1200 1344 K4 1290 1445 J4 1120 1255 2-Step Group Order Code 3-Step Group Order Code 75 4-Step Group 65F 6500 K 80 70 --- 65F 70 70 80 CXA1310-0000000N0HK265F K2 1200 1344 CXA1310-0000000N00K257F K4 1290 1445 CXA1310-0000000N00K457F J4 1120 1255 CXA1310-0000000N0HJ457F K2 1200 1344 K2 1200 1344 75 57F --- 57F 75 50H CXA1310-0000000N00K250H K4 1290 1445 CXA1310-0000000N00K450H J4 1120 1255 CXA1310-0000000N0HJ450H K2 1200 1344 J4 1120 1255 --- 50H 75 40H CXA1310-0000000N0HK250H 1200 1344 CXA1310-0000000N00K240H J4 1120 1255 CXA1310-0000000N0HJ440H K2 1200 1344 CXA1310-0000000N0HK240H J2 1040 1165 CXA1310-0000000N00J235H J4 1120 1255 G2 780 881 --- 40H --- 35H 95 35H G4 840 941 50F 50G CXA1310-0000000N0HJ440G CXA1310-0000000N0HK240G CXA1310-0000000N00J440H K2 3500 K 93 CXA1310-0000000N0HJ465F 1344 4000 K 80 CXA1310-0000000N00K465F 1200 5000 K 80 CXA1310-0000000N00K265F K2 5700 K 80 Order Code CXA1310-0000000N00J435H CXA1310-0000000N0YG235H CXA1310-0000000N0YG435H 50F 40F 40G 35G 35G CXA1310-0000000N0HJ440G CXA1310-0000000N0HK240G CXA1310-0000000N00J235G CXA1310-0000000N00J435G CXA1310-0000000N0YG235G CXA1310-0000000N0YG435G 40F 35F 35F CXA1310-0000000N0HK257F CXA1310-0000000N00K250F CXA1310-0000000N00K450F CXA1310-0000000N0HJ450F CXA1310-0000000N0HK250F CXA1310-0000000N00J440F CXA1310-0000000N00K240F CXA1310-0000000N0HJ440F CXA1310-0000000N0HK240F CXA1310-0000000N00J235F CXA1310-0000000N00J435F CXA1310-0000000N0YG235F CXA1310-0000000N0YG435F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® CXA1310 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 350 mA, TJ = 85 °C) - Continued Nominal CCT CRI Minimum Luminous Flux Min Typ 80 --- Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* J2 1040 1165 2-Step Group 30H 80 1120 1255 CXA1310-0000000N00J430H G2 780 881 CXA1310-0000000N0YG230H G4 840 941 CXA1310-0000000N0YG430H H4 970 1086 CXA1310-0000000N00H427H J2 1040 1165 F4 730 831 95 30H --- 27H 2700 K 93 CXA1310-0000000N00J230H J4 3000 K 93 Order Code 95 27H G2 780 881 CXA1310-0000000N00J227H CXA1310-0000000N0YF427H CXA1310-0000000N0YG227H 3-Step Group 30G 30G 27G 27G Order Code CXA1310-0000000N00J230G CXA1310-0000000N00J430G CXA1310-0000000N0YG230G CXA1310-0000000N0YG430G CXA1310-0000000N00H427G CXA1310-0000000N00J227G CXA1310-0000000N0YF427G CXA1310-0000000N0YG227G 4-Step Group 30F 30F 27F 27F Order Code CXA1310-0000000N00J230F CXA1310-0000000N00J430F CXA1310-0000000N0YG230F CXA1310-0000000N0YG430F CXA1310-0000000N00H427F CXA1310-0000000N00J227F CXA1310-0000000N0YF427F CXA1310-0000000N0YG227F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® CXA1310 LED Flux Characteristics, ANSI White Order Codes and Bins - 36 V (If = 350 mA, TJ = 85 °C) The following table provides order codes for XLamp CXA1310 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 19). Nominal CCT CRI Minimum Luminous Flux Min Typ 70 75 80 --- 70 75 80 --- 70 75 80 --- 70 75 6500 K 5700 K 5000 K 4000 K Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 K2 1200 1344 K4 1290 1445 J4 1120 1255 K2 1200 1344 J4 1120 1255 K2 1200 1344 Chromaticity Regions 1A0, 1B0, 1C0, 1D0, 65F 1A0, 1B0, 1C0, 1D0, 65F 2A0, 2B0, 2C0, 2D0, 57F 2A0, 2B0, 2C0, 2D0, 57F 3A0, 3B0, 3C0, 3D0, 50F 3A0, 3B0, 3C0, 3D0, 50F 5A0, 5B0, 5C0, 5D0, 40F Order Code CXA1310-0000-000N00K20E1 CXA1310-0000-000N00K40E1 CXA1310-0000-000N0HJ40E1 CXA1310-0000-000N0HK20E1 CXA1310-0000-000N00K20E2 CXA1310-0000-000N00K40E2 CXA1310-0000-000N0HJ40E2 CXA1310-0000-000N0HK20E2 CXA1310-0000-000N00K20E3 CXA1310-0000-000N00K40E3 CXA1310-0000-000N0HJ40E3 CXA1310-0000-000N0HK20E3 CXA1310-0000-000N00J40E5 CXA1310-0000-000N00K20E5 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 22). • Cree XLamp CXA1310 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® CXA1310 LED Relative Spectral Power Distribution - White, Hot Binned, Baby Relative Spectral Power Distribution (18 V, If = 700 ma; 36 V, If = 350 ma, Tj = 85 °C) The following graph is the result of a series of pulsed measurements at 350 mA for the 18-V CXA1310 LED and 700 mA for the 36-V CXA1310 LED and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 5000 K, 70 CRI 60% 4000 K, 70 CRI 50% 3000 K, 80 CRI 40% 3000 K, 93 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® CXA1310 LED Electrical Characteristics The following graph is the result of a series of steady-state measurements. 20.0 18 V 19.5 Voltage (V) 19.0 18.5 Tc = 25 °C Tc = 55 °C 18.0 Tc = 85 °C 17.5 Tc = 105 °C 17.0 16.5 16.0 200 300 400 500 600 700 800 900 1000 1100 Current (mA) 40 36 V 39 Voltage (V) 38 37 Tc = 25 °C Tc = 55 °C 36 Tc = 85 °C 35 Tc = 105 °C 34 33 32 100 150 200 250 300 350 400 450 500 550 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® CXA1310 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXA1310 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 700 mA at TJ = 85 °C for the 18‑V CXA1310 LED. For example, at steady-state operation of Tc = 55 °C, IF = 500 mA, the relative luminous flux ratio is 80% in the chart below. A CXA1310 LED that measures 1200 lm during binning will deliver 960 lm (1200 * 0.8) at steady-state operation of Tc = 55 °C, IF = 500 mA. 160% Relative Luminous Flux 140% 18 V 120% Tc = 25 °C 100% Tc = 55 °C 80% Tc = 85 °C Tc = 105 °C 60% 40% 20% 0% 400 500 600 700 800 900 1000 1100 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® CXA1310 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXA1310 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 350 mA at TJ = 85 °C for the 36‑V CXA1310 LED. For example, at steady-state operation of Tc = 55 °C, IF = 250 mA, the relative luminous flux ratio is 80% in the chart below. A CXA1310 LED that measures 1200 lm during binning will deliver 960 lm (1200 * 0.8) at steady-state operation of Tc = 55 °C, IF = 250 mA. 160% Relative Luminous Flux 140% 36 V 120% Tc = 25 °C 100% Tc = 55 °C 80% Tc = 85 °C Tc = 105 °C 60% 40% 20% 0% 200 250 300 350 400 450 500 550 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® CXA1310 LED Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Performance Groups - Brightness (18 V, If = 700 ma; 36 V, If = 350 ma, Tj = 85 °C) XLamp CXA1310 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 K4 1290 1380 M2 1380 1485 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® CXA1310 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXA1310 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code 50H 40H 35H 30H 27H CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 EasyWhite Color Temperatures – 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 40G 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Bin Code CCT 50G Center Point Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® CXA1310 LED Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED EasyWhite Color Temperatures – 4-Step Code 65F 57F 50F 40F 35F 30F 27F CCT 6500 K 5700 K 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3097 0.3196 0.3079 0.3297 0.3164 0.3382 0.3176 0.3275 0.3253 0.3325 0.3249 0.3439 0.3331 0.3514 0.3330 0.3393 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® CXA1310 LED Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED ANSI White Bins Code Bin Code CCT 1A0 1B0 0E1 6500 K 1C0 1D0 ANSI White Bins x y 0.3048 0.3130 0.3144 0.3186 Code x y 0.3207 0.3215 0.3350 0.3290 0.3290 0.3417 0.3290 0.3300 2A0 0.3068 0.3113 0.3222 0.3243 0.3028 0.3304 0.3207 0.3462 0.3115 0.3391 0.3290 0.3538 0.3130 0.3290 0.3290 0.3417 0.3048 0.3207 0.3215 0.3350 0.3115 0.3391 0.3290 0.3538 0.3205 0.3481 0.3376 0.3616 0.3213 0.3373 0.3371 0.3490 0.3130 0.3290 0.3290 0.3417 0.3130 0.3290 0.3290 0.3417 0.3213 0.3373 0.3371 0.3490 0.3221 0.3261 0.3366 0.3369 0.3144 0.3186 0.3290 0.3300 2B0 0E2 5700 K 2C0 2D0 ANSI White Bins Code CCT Bin Code 3A0 3B0 0E3 5000 K 3C0 3D0 Bin Code CCT ANSI White Bins x y Code CCT Bin Code x y .3371 .3490 .3670 .3578 .3451 .3554 .3702 .3722 .3440 .3427 .3825 .3798 .3366 .3369 .3783 .3646 .3376 .3616 .3702 .3722 .3463 .3687 .3736 .3874 .3451 .3554 .3869 .3958 .3371 .3490 .3825 .3798 .3463 .3687 .3825 .3798 .3551 .3760 .3869 .3958 .3533 .3620 .4006 .4044 .3451 .3554 .3950 .3875 .3451 .3554 .3783 .3646 .3533 .3620 .3825 .3798 .3515 .3487 .3950 .3875 .3440 .3427 .3898 .3716 5A0 5B0 0E5 4000 K 5C0 5D0 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® CXA1310 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.44 ANSI C78.377 Quadrangle 2700 K 3000 K EasyWhite 4-Step 0.43 EasyWhite 3-Step 0.42 EasyWhite 2-Step 3500 K 0.41 4000 K 0.40 4500 K CCy 0.39 5000 K 0.38 0.37 5700 K 0.36 6500 K 0.35 0.34 0.33 0.32 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.31 CCx Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.41 4000 K ANSI C78.377 Quadrangle 0.40 4500 K 5C 0.39 5D 0.37 CCy 5B 5000 K 0.38 5700 K 0.36 5A 3C 3B 6500 K 0.35 2B 0.34 1C 1B 0.33 3D 2C 1D 3A 2D 2A 1A 0.32 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.31 CCx Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® CXA1310 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXA13 Series = CXA13 Internal code Chromaticity bin CRI Specification 0 = Standard CRI NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE HINFORMATION = 80 min CRI CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE,Y INC. = THIS 93 PLOT min CRI 6 5 4 3 Internal code MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. SSSSSCC-HHHH-HHHGGRNNNNN SSSSSCC-WWW-FF-GGR-AAAAA Kit code CRI Specification B = 70 min CRI H = 80 min CRI Y = 93 min CRI Vf class F0 = 18-V class N0 = 36-V class D Vf class F0 = 18-V class N0 = 36-V class Flux bin Performance class Performance class Mechanical Dimensions Dimensions are in mm. 13.35 ±0.2 Tolerances unless otherwise specified: +.13 x° +1° C 1.22 2.60 2.86 Tc 1.00 ± .15 1.22 2.60 4.19 R.500 13.35 ±0.2 6.0 ±0.2 B 2.60 7.50 ±0.2 1.22 2.60 1.22 0.55 ± 0.1 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. A 19 UN MIL TO XLamp ® CXA1310 LED Thermal Design The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed limits. Please refer to page 2 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXA soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXA LEDs successfully in luminaire designs. To keep the CXA1310 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following R_j-c R_j-c scale. Tc Tc As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_tim graphs, depending on the operating environment. The y‑axis in the graph is a base 10 logarithmic R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CXA1310-18V Ta Ta 100.00 18 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 400 500 600 700 800 900 1000 1100 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® CXA1310 LED CXA1310-36V Thermal Design - Continued 100.00 36 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 200 250 300 350 400 450 500 550 Current (mA) Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 21 XLamp ® CXA1310 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22 XLamp ® CXA1310 LED Packaging Cree CXA1310 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 LEDs per carton. Each 5 carton contains 100 LEDs from 4 the same performance bin. 3 2 REVISONS E T AND THE INFORMATION ROPRIETARY AND OF CREE, INC. THIS PLOT CED OR DISCLOSED TO ANY 5 OUT THE WRITTEN CONSENT 4 3 5 4 1 x° +1°REVISONS REV 3 5.875 Tolerances: +.13 2 ON T O ANY N CONSENT DimensionsDESCRIPTION are in inches. REV BY DESCRIPTION 2 DATE APP'D 1 R .375 5.875 NSENT R .375 5.875 .875 R .375 .875 5.875 .875 5 LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREEPATENT BIN CODE, LABEL IS LOCATED QUANTITY, LOT # ON UNDERSIDE OF CARTON ENT LABEL NDERSIDE OF COVER TH CREE BIN ANTITY, LOT # LABEL WITH CREE BIN CODE, QTY, LOT # .875 LABEL WITH CREE BIN CODE, QTY, LOT # .875 BAG .38 .875 BAG BAG L IS LOCATED IDE OF COVER LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # DATE DRAWN BY UNLESS OTHERWISE SPECIFIED D. CRONIN DIMENSIONS ARE IN CHECK MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 APPROVED .XXX ± .125 DRAWN X° BY ± .5 ° DATE UNLESS OTHERWISE SPECIFIED THIRD ANGLE PROJECTION D. CRONIN FOR SHEET METAL PARTS ONLY 05/08/12MATERIAL DIMENSIONS ARE IN N CODE, QTY, LOT # THIRD ANGLE PROJECTION WITH CREE BIN QUANTITY, LOT # 5 4 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 4 3 THIRD ANGLE PROJECTION MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° CHECK .X ± .XX ± .XXX ± APPROVED X° ± SURFACE FINISH: FOR SHEET METAL PARTS ONLY UNLESS OTHERWISE SPECIFIED 3 .X ± DIMENSIONS ARE1.5 IN .XX ± .75 MILLIMETERS.XXX & BEFORE FINISH. .25 ® ® ± notice. Cree , ±XLamp TOLERANCE UNLESS SPECIFIED: X° .5 ° and .X ± 1.60.1 SURFACE FINISH: .XX ± .05 .XXX ± .005 X° ± 1 ° FOR SHEET METAL PARTS ONLY .X ± .06 1.5 .75 .25 .5 ° TITLE LE1401 MARKETIN 4600 Silicon Drive Durham, N.C 27703 SIZE DATE FINAL PROTECTIVE FINISH TITLE Phone (919) 313-5300 C DRAWING NO. CXA1 Fax (919) 313-5558 SCALE 8.000 SPEC LE1401 MARKETING DATE 2 4600 Silicon Drive REV. Durham, N.C 27703 DRAWING NO. SIZE Phone (919) 361-4770 C and the CXA1310 are registered trademarks Cree logo is a A CHECK FINAL PROTECTIVE FINISH ® EasyWhite DATE DATE 1.6 MATERIAL DRAWN BY 05/08/12 DATE APPROVED DATE Fax (919) 313-5303 DATE SCALE SHEET 8.000 OF TITLE MATERIAL 2 1 CXA15XX_DATASHEET 23 SIZE FINAL PROTECTIVE FINISH DRAWING NO. CXA15XX_DATASHEET_BAG2013 2 /2