SURFACE MOUNT CLOCK OSCILLATOR CSMF SERIES: Multi

SURFACE MOUNT CLOCK OSCILLATOR
CSMF SERIES: Multi-Frequency Oscillator with Low Jitter Output 10MHz – 1200MHz
PRODUCT DESCRIPTION
The CSMF clock series is a cutting edge family of High Frequency, Low Jitter Output, Multi-Frequency Clock
Oscillators based on an advanced digital PLL platform. The CSMF clocks are available in a 7x5mm ceramic
package with output frequency from 10MHz to 1.2 GHz. The CSMF units are pre-programmed with up to 2
different output frequencies, any of which are user selected. Such flexibility significantly reduces design cycle
time and overall cost. The CSMF clock design incorporates a low frequency crystal along with low Jitter
frequency synthesizer to provide a wide range of frequencies. The CSMF Clocks are available in LVCMOS,
LVPECL and LVDS outputs, making them suitable for a wide range of applications.
APPLICATION
ƒ
ƒ
ƒ
ƒ
ƒ
SONET/SDH
FIBRE CHANNEL
10G,100G, GIGABIT ETHERNET
CLOCK / DATA RECOVERY
TEST AND MEASUREMENT
ELECTRICAL SPECIFICATION
PARAMETER
Frequency, nominal
Supply voltage, nom.
Supply current
LVPECL output levels
LVPECL output voltage swing
LVDS differential output voltage
LVDS offset voltage, typical
LVCMOS / LVTTL output levels
Duty cycle
Rise/ fall time, max.
RMS phase jitter
1
Overall freq. stability, max.
Enable / Disable
Operating temperature
Storage temperature
Absolute voltage range
SYMBOL
fO
VCC
Is
VOH
VOL
Vp-p
∆VOD
VOS
VOH / VOL
DC
tr / tf
J
∆f/fc
En / Dis
Ta
T(stg)
Vcc(abs)
CONDITIONS
Up to 2 available output frequencies
Typical (depending on output)
Output termination 50Ω ~ Vcc - 2.0V
Output termination 50Ω ~ Vcc - 2.0V
100Ω termination between outputs
min/max
Load = 10kΩ // 20pF
20% - 80% (VOL, VOH)
Typical
Various available, specified when ordered
Min (logic 1) / Max (logic 0)
Absolute max
VALUE
UNIT
10 -1200
2.5 or 3.3
35 ~ 45
Vcc -1.4 ~ Vcc - 0.9
Vcc - 2.0 ~ Vcc - 1.7
0.6 ~ 1.0
350
1.25
0.7Vcc / 0.3Vcc
40/60 or 45/55
0.6
0.8
±20 ~ ±100.
0.7 (Vcc) / 0.3 (Vcc)
-40 ~ +85
-45 ~ +100
Vcc ± 0.5
MHz
V
mA
V
V
V
mV
V
V
%
ns
ps
ppm
V
°C
°C
V
Notes
1
See part numbering table
2
Contact factory
RALTRON ƒ 10651 N.W. 19th St ƒ Miami, Florida 33172 ƒ U.S.A.
Phone: (305) 593-6033 ƒ Fax: (305) 594-3973 ƒ e-mail: [email protected] ƒ web: http://www.raltron.com
SURFACE MOUNT CLOCK OSCILLATOR
MECHANICAL SPECIFICATION
INDICATES PIN 1.
.197 ±.008
5.0 ±0.2
OUTLINE TOLERANCE
IF NOT SPECIFIED:
±0.015” / 0.4mm
.276 ±.008
7.0 ±0.2
.200
5.08
.100
2.54
2
5
.129
3.28
.079 TYP.
2.00 TYP.
4
MARKING:
CSMF293 – (family)
ASH X-Y– (frequency codes)
R D/C – (factory date code)
3
.087
2.20
.150
3.81
6
[2] ENABLE / DISABLE
[3] GROUND
[4] OUTPUT
[5] COMP. OUTPUT
[6] SUPPLY VOLTAGE
.079 MAX.
2.00 MAX.
.050
1.27
1
PIN FUNCTIONS:
3
[1] FREQ SELECT (SEL)
4
.055 TYP.
1.40
.071
1.80
*0.01uF external bypass capacitor is
recommended as seen in solder pattern
** RoHS compliant
.100
2.54
SOLDER PATTERN
Notes
3
Frequency Select pin (SEL)
Logic 1 (NC) = Output Frequency 1 (First frequency listed in part # is automatically available. Customer specified at time of order)
Logic 0 = Output Frequency 2 (Second frequency listed in part # is available. Customer sets SEL pin to Low)
4
Enable / Disable feature is available on either pin 1 or pin 2. See options on part numbering table.
PART NUMBERING SYSTEM:
SERIES
NUMBER OF
OUTPUTS
OUTPUT
SUPPLY
VOLTAGE
(V)
SYMMETRY
(%)
Surface
mount
Multifrequency
Clock
Oscillator
1: Single Output
2: Dual Output
9: LVPECL
8: LVDS
4: LVCMOS
1: Vcc =2.5
3: Vcc =3.3
A: 40/60
T: 45/55
CSMF
2
9
3
A
TEMP
RANGE
(°C)
R: 0~50
S: 0~70
U: -20~70
V: -40~85
S
FREQUENCY
STABILITY
(ppm)
K: ±20
I: ±25
H: ±50
J: ±100
H
ENABLE /
DISABLE
PIN
OUTPUT FREQUENCY
(MHz)
1: Pin 1
2: Pin 2
XXX.XXX-YYY.YYY
Freq1- Freq 2
2
-
XXX-YYY
EXAMPLE: CSMF293ASH2-622-311
Clock Oscillator, 7x5mm package, Dual output, LVPECL, +3.3V Supply, 40/60 Symmetry, 0~+70°C Operating
Temperature Range, ±50ppm overall Frequency Stability, Enable/Disable on pin 2, 622.080 MHz and
311.040MHz output frequency.
RALTRON ƒ 10651 N.W. 19th St ƒ Miami, Florida 33172 ƒ U.S.A.
Phone: (305) 593-6033 ƒ Fax: (305) 594-3973 ƒ e-mail: [email protected] ƒ web: http://www.raltron.com
SURFACE MOUNT CLOCK OSCILLATOR
REFLOW PROFILE:
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
tL
TSMAX
Temp.
[°C]
TSMIN
Ramp-down
tS Preheat
t[25°C] to Peak
Temperature Min Preheat
Temperature Max Preheat
Time (TSMIN to TSMAX)
Temperature
Peak Temperature
Ramp-up rate
Ramp-down rate
Time within 5°C of Peak Temperature
Time t[25°C] to Peak Temperature
Time
Time [sec]
Reflow profile IPC/JEDEC J-STD-020 REV. C
TSMIN
TSMAX
tS
TL
TP
RUP
RDOWN
tP
t[25°C] to Peak
tL
150°C
200°C
60-180 sec.
217°C
260°C
3°C/sec max.
6°C/sec max.
20-40 sec.
480 sec.
60-150 sec.
RALTRON ƒ 10651 N.W. 19th St ƒ Miami, Florida 33172 ƒ U.S.A.
Phone: (305) 593-6033 ƒ Fax: (305) 594-3973 ƒ e-mail: [email protected] ƒ web: http://www.raltron.com