CLOCK Page 1 of 3 C9P: PLL LVPECL SERIES: ULTRA HF CLOCK OSCILLATOR, LVPECL, +3.3 VDC DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling (LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for today's automated assembly environments. APPLICATIONS AND FEATURES: " " " " " " $ Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches; Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz +3.3 VDC LVPECL Frequency Range from 750KHz to 800 MHz PLL multiplication (F>25MHz) Miniature Ceramic SMD Package Available on Tape and Reel Lead Free and ROHS Compliant " ABSOLUTE MAXIMUM RATINGS: PARAMETER SYMBOL VALUE UNIT Operating temperature range Ta -40…+85 °C Storage temperature range T(stg) -55…+90 °C Supply voltage Vcc +4.6 VDC Maximum Input Voltage Vi Vss-0.5…Vcc+0.5 VDC Maximum Output Voltage Vo Vss-0.5…Vcc+0.5 VDC $ ELECTRICAL PARAMETERS: PARAMETER SYMBOL TEST CONDITIONS*1 VALUE UNIT Nominal Frequency fo 0.75~ 800.00** MHz Supply Voltage Vcc +3.3 ±5% VDC Supply Current Is 100.0 MAX mA Output Logic Type LVPECL Load Duty Cycle Voh Vol DC Rise / Fall Time tr / tf Output Voltage Levels Connected between each output and Vcc – 2.0 VDC min max Measured at 50% of Vcc 50 Vcc-1.025 Vcc-1.620 40/60 to 60/40 or 45/55 to 55/45 0.7 TYP 1.0 MAX*2 2.6 TYP** 2.5 TYP** 4 TYP ** 6 TYP ** 30 TYP** 40 TYP** Phase Noise £(∆f) Overall Frequency Stability ∆f/fc Measured at 20/80% and 80/20% Vcc Levels Integrated Phase tji RMS, Fo=155.52MHz Fj = 12 kHz…20 MHz5 Fo=622.08MHz Fo=155.52MHz. Random period Jitter Rj using wavecrest analyzer 4 Fo=622.08MHz Fo=155.52MHz. Acumm. Peak to Peak Jitter Tp-p using wavecrest analyzer*4 Fo=622.08MHz ∆f=10 Hz ∆f=100 Hz ∆f=1 KHz ∆f=10 KHz 6 typ. @155.52MHz ∆f=100 KHz ∆f=1M Hz ∆f=10M Hz ∆f>20M Hz Op. Temp., Aging, Load, Supply and Cal. Variations En Dis High Voltage or No Connect Ground 0.7•Vcc MIN 0.3•Vcc MAX Dis En High Voltage Ground or No Connect 0.7•Vcc MIN 0.3•Vcc MAX Jitter J Enable High Option; Pin 1 Output Enabled Output Disabled Enable Low Option; Pin 1 Output Disabled Output Enabled RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th -60 -90 -120 -125 -121 -121 -140 -145 ±20, ±25, ±50, or ±100 MAX*3 St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com Ω VDC VDC % ns ps ps ps dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ppm VDC VDC VDC VDC CLOCK Page 2 of 3 *1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C *2 Frequency Dependent *3 Not All Stabilities Available With All Temperature Ranges—Please Consult Factory For Availability *4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering *5 Calculated from Agilent 5500 phase noise measurements *6 Measured with Agilent 5500 $ PART NUMBERING SYSTEM: SERIES TEMPERATURE RANGE (°C) SYMMETRY C9P: UHF +3.3Vdc Clock with LVPECL Comp. Output A: 40/60 to 60/40% T: 45/55 to 55/45% R: S: U: V: FREQUENCY STABILITY (Overall) K: ±20 ppm** I: ±25 ppm H: ±50 ppm J: ±100 ppm 0…+50 0…+70 -20…+70 -40…+85** FREQUENCY (MHz) 0.75…800.000 Enable/Disable Enable High – standard (Omit Suffix) EL; Enable Low EXAMPLE: -155.520 Clock Oscillator, 7x5mm Package, +3.3 VDC Supply Voltage, LVPECL Output, Standard Symmetry, 0…+70°C Operating Temperature Range, ±50 ppm Total Frequency Stability, 155.520 MHz ** ±20ppm stability may not be available at all combinations, please consult the factory for any custom requirements. MECHANICAL PARAMETERS: OUTLINE TOLERANCE: ±0.006” / 0.15mm (Unless otherwise specified) .197 ±.008 5.0 ±0.2 INDICATES PIN 1. .276 ±.008 7.0 ±0.2 .200 5.08 .100 2.54 1 2 5 .055 TYP. 1.40 MARKING: C9PASH 155.52 RAL D/C .079 TYP. 2.00 TYP. 3 .150 3.81 6 PIN FUNCTIONS: [1] ENABLE/ DISABLE [2] NO CONNECT [3] CASE GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE .079 MAX. 2.00 MAX. .050 1.27 $ *0.01µ µF external by-pass .087 2.20 filter is recommended as seen on solder pattern. 4 .071 1.80 .100 2.54 SOLDER PATTERN RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com CLOCK Page 3 of 3 ! REFLOW PROFILE: **ROHS COMPLIANT** RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com