FKC08 SERIES 8 WATTS DC-DC CONVERTER FEATURES • 8 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 2A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 88% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY (300kHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS SMD TYPE APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The FKC08 series offer 8 watts of output power from a package in an IC compatible 24pin DIP configuration. FKC08 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FKC08 have features 1600VDC of isolation, short circuit protection and as well as five sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 8 Watts, max. Voltage accuracy ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Single (DIP) No Load to Full Load Single (SMD) Dual (SMD,DIP) Load regulation ± 0.5% ± 1% ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 200µs Over load protection 150% % of FL at nominal input Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS See table Input to Output Input(Output) to Case Isolation resistance 500VDC Isolation capacitance Switching frequency Case material Base material Potting material Dimensions Weight MTBF (Note 1) Page 1 of 3 1600VDC, min. 1minute DIP 1600VDC, min. 1minute SMD 1000VDC, min. 1minute 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Input filter Input surge voltage Pi type 12VDC input 24VDC input 48VDC input 36VDC 100ms,max. 50VDC 100ms,max. 100VDC 100ms,max. Input reflected ripple current 20mAp-p Nominal input and Start up time Power up 700ms constant resistive load Remote ON/OFF (Note 5) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Input current of remote control pin Nominal input -0.5mA ~ 0.5mA Remote off state input current Nominal input 2.5mA ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -40ºC ~ +85ºC (with derating) +100ºC Storage temperature range Thermal impedance -55ºC ~ +125ºC Nature convection 20ºC/Watt 9 Thermal shock MIL-STD-810F 300pF, max. Vibration MIL-STD-810F 10 ohms, min. 300kHz±10%. Design meet safety standard 12VDC nominal input 24VDC nominal input 48VDC nominal input Maximum case temperature Efficiency Isolation voltage Input voltage range IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) BELLCORE TR-NWT-000332 3.053 x 106 hrs MIL-HDBK-217F 1.213 x 106 hrs Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 6) EN55022 Class A, Class B Air Contact ± 8kV ± 6kV Perf. Criteria A ESD EN61000-4-2 Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2kV Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A www.pduke.com 2013/6/4 FKC08 SERIES 8 WATTS Model Number Input Range Output Voltage FKC08-12S33 FKC08-12S05 FKC08-12S12 FKC08-12S15 FKC08-12D05 FKC08-12D12 FKC08-12D15 FKC08-24S33 FKC08-24S05 FKC08-24S12 FKC08-24S15 FKC08-24D05 FKC08-24D12 FKC08-24D15 FKC08-48S33 FKC08-48S05 FKC08-48S12 FKC08-48S15 FKC08-48D05 FKC08-48D12 FKC08-48D15 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC DC-DC CONVERTER Output Current Output Min. load Full load Ripple & Noise 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA 2000mA 1500mA 666mA 533mA ± 800mA ± 333mA ± 267mA (2) (3) (4) No load Input Current Eff (%) Capacitor Load max 10mA 15mA 13mA 20mA 15mA 20mA 20mA 10mA 30mA 13mA 15mA 15mA 15mA 13mA 7mA 8mA 10mA 10mA 8mA 8mA 7mA 80 83 88 87 83 87 85 80 83 86 85 82 86 85 80 83 86 86 85 87 87 3300µF 1600µF 350µF 240µF ± 1000µF ± 160µF ± 100µF 3300µF 1600µF 350µF 240µF ± 1000µF ± 160µF ± 100µF 3300µF 1600µF 350µF 240µF ± 1000µF ± 160µF ± 100µF 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input voltage and no load. 3. Typical value at nominal input voltage and full load. 4. Test by minimum input and constant resistive load. 5. The ON/OFF control pin voltage is referenced to –INPUT. 6. The FKC08 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. Page 2 of 3 www.pduke.com 2013/6/4 FKC08 SERIES 8 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION SMD PIN CONNECTION PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 NC NC COMMON -OUTPUT 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT Page 3 of 3 PIN 1 2 3 SINGLE CTRL -INPUT -INPUT DUAL CTRL -INPUT -INPUT PIN SINGLE DUAL 23 22 +INPUT +INPUT +INPUT +INPUT 9 11 Others NC NC NC COMMON -OUTPUT NC 16 14 -OUTPUT +OUTPUT COMMON +OUTPUT www.pduke.com 2013/6/4