Murata Power Solutions’ latest Digital Panel Meters LED & LCD D Panel Meters AC & DC Ammeters C & DC Voltmeters 2-Wire AC 4-20mA Readouts Process Monitors AC Powerr Meters Murata Power Solutions Digital Panel Meters For more than 35 years, the Murata Power Solutions’ offering of digital panel meters has been recognized as the industry’s most st versatile. If a standard product does not meet your requirements, s, our experienced team of designers can quickly develop a custom m solution. Murata Power Solutions digital panel meters are expertlyy designed for a variety of applications, including: Test & Measurement Data Centers Marine About Murata Power Solutions Recreational Vehicles Murata Power Solutions was established by Murata Manufacturing Corporation in September 2007 with its acquisition of the Power Electronics Division of C&D Technologies, Inc. The acquisition brought with it a comprehensive offering of products and capabilities from market leading companies including: • DATEL, Inc. • Medium to high power DC-DC converters • Data acquisition products • Digital panel meters Contents 3½ & 4½ Digit LED/LCD Panel Meters........................................3 True-rms Voltmeters ..................................................................5 AC Ammeters.............................................................................6 AC Power Meters .......................................................................8 DC Ammeters ............................................................................8 2-Wire Voltmeters ......................................................................9 2-Wire Frequency Meters...........................................................9 Loop-Powered 4-20mA Readouts ............................................11 Locally Powered 4-20mA Readouts..........................................11 0-5V & 0-10V Process Monitors ...............................................11 Panel Meter Accessories ..........................................................12 Energy Efficient Products .........................................................13 murata-ps.com ........................................................................14 Murata Power Solutions Product Overview ...............................15 2 • Newport Components Ltd. • Miniature low power DC-DC converters • Inductors, transformers, and filters • Power Systems Division of Celestica, Inc. • AC-DC front end power supplies • Processor power (VRMs) • Celab Ltd. • Power conversion products for harsh environments Murata Power Solutions is one of the top five suppliers of power electronics, with sales, manufacturing, and design teams operating from facilities in the United States, Canada, China, Japan, Singapore, England, France, and Germany. Backed by a network of the leading electronics distributors, Murata Power Solutions can effectively support your local and global requirements. Manufactured to the highest standards in ISO 9001:2000 Certified facilities, our products undergo the strictest verification testing, so you can be sure that they perform to, and often beyond, their specifications. www.murata-ps.com/dpm 3½ Digit, Subminiature LED Panel Meters DMS-20PC Series • • • • • • • • Large LED displays: 0.37"/9.4mm 12-pin DIP packages, panel or board mountable Low-current LED models (7mA) 4 input ranges: ±200mV, ±2V, ±20V, ±200V Built-in color filters and bezels Moisture/vibration resistant encapsulated packages DISPLAY ENABLE function for “power down” mode DISPLAY TEST and HOLD functions (optional) ailable Now av ower -p w lo h it w green d n a e blu LEDs! Ordering Guide DMS-20PC - 1- R S - C RoHS Compliant LED Model Intensity/Power (+5V Supply) S = Standard Brightness H = High Intensity (Red) L = Low Power (Red, green, blue) Input Range 0 = ±200mV 1 = ±2V 2 = ±20V 3 = ±200V LED Color Package Dimensions 1.38"W x 0.88"H x 0.475"D 35.1mm W x 22.4mm H x 12.07mm D Y Datasheet O A R G B www.murata-ps.com/dms-20pc 3½ Digit, Miniature LED Panel Meters DMS-30PC Series • • • • • • • Large displays: 0.56"/14.2mm Low-current LED models (12mA) 12-pin DIP packages, panel or board mountable 4 input ranges: ±200mV, ±2V, ±20V, ±200V Built-in color filters and bezels Moisture/vibration resistant encapsulated packages Numerous application boards available Ordering Guide DMS-30PC - 1- R S-C LED Model Input Range 0 = ±200mV 1 = ±2V 2 = ±20V 3 = ±200V RoHS Compliant Intensity/Power (+5V Supply) S = Standard Brightness H = High Intensity (Red only) L = Low Power (Red, orange and green only) LED Color Package Dimensions 2.17"W x 0.92"H x 0.56"D 55.1mm W x 23.4mm H x 14.22mm D Y Datasheet O A R G B Q www.murata-ps.com/dms-30pc 3½ Digit, Daylight Readable Panel Meters • Super-bright LED displays are readable in direct sunlight Ordering Guide • Automatic display-brightness adjustment DMS-30DR - 1 - R - C • Includes provision for external brightness adjustment LED Model RoHS Compliant • Power consumption: Less than 1W at max. brightness Input Range Less than 0.1W at normal brightness LED Color R with Auto-Dimming LED Displays 0 = ±200mV 1 = ±2V 2 = ±20V 3 = ±200V Package Dimensions Datasheet Datasheet DMS-30DR Series 2.17"W x 0.92"H x 0.56"D 55.1mm W x 23.4mm H x 14.22mm D DMS-30DR Series www.murata-ps.com/dms-30dr 4½ Digit, Miniature LED Panel Meters DMS-40PC Series • • • • • • • Scientific-grade accuracy, ±2 counts Large displays: 0.52"/13.2mm (LED) 12-pin DIP packages, panel or board mountable Low-current LED models (35mA) Display HOLD function standard 4 input ranges: ±200mV, ±2V, ±20V, ±200V Moisture/vibration resistant encapsulated packages Ordering Guide DMS-40PC - 1- R S - C RoHS Compliant LED Model Input Range 1 = ±2V 2 = ±20V 3 = ±200V Intensity/Power (+5V Supply) S = Standard Brightness H = High Intensity (Red only) L = Low Power (Red only) LED Color Package Dimensions 2.17"W x 0.92"H x 0.56"D 55.1mm W x 23.4mm H x 14.22mm D www.murata-ps.com/dpm Y Datasheet R G www.murata-ps.com/dms-40pc 3 3½ Digit, Subminiature LCD Panel Meters DMS-20LCD Series Package Dimensions • • • • • • • Large LCD displays: 0.37"/9.4mm 12-pin DIP packages, panel or board mountable 4 input ranges: ±200mV, ±2V, ±20V, ±200V Single +5V supply or 9V battery Moisture/vibration resistant encapsulated packages Low-battery annunciator Low power consumption (2mW) 1.38"W x 0.88"H x 0.425"D 35.1mm W x 22.4mm H x 10.8mm D Ordering Guide DMS-20LCD - 1 - 5 RoHS Compliant Leave blank for standard models. Add -B for backlit models. LCD Model Input Range 0 = ±200mV 1 = ±2V 2 = ±20V 3 = ±200V Datasheet -C Power Source: 5 = +5V 9 = +9V www.murata-ps.com/dms-20lcd 3½ Digit, Miniature LCD Panel Meters DMS-30LCD Series Package Dimensions • • • • • • • Large displays: 0.40"/10.2mm 12-pin DIP packages, panel or board mountable 4 input ranges: ±200mV, ±2V, ±20V, ±200V Moisture/vibration resistant encapsulated packages Single +5V supply or 9V battery Numerous application boards available Backlit displays optional 2.17"W x 0.92"H x 0.43"D 55.1mm W x 23.4mm H x 10.92mm D Ordering Guide DMS-30LCD - 1 - 5 RoHS Compliant Leave blank for standard models. Add -B for backlit models. LCD Model Input Range 0 = ±200mV 1 = ±2V 2 = ±20V 3 = ±200V Datasheet -C Power Source: 5 = +5V 9 = +9V www.murata-ps.com/dms-30lcd 4½ Digit, Miniature LCD Panel Meters DMS-40LCD Series Package Dimensions 4 • • • • • • • • Scientific-grade accuracy, ±2 counts Large displays: 0.40"/10.2mm (LCD) 12-pin DIP packages, panel or board mountable Display HOLD function standard 4 input ranges: ±200mV, ±2V, ±20V, ±200V Dual input ranges Moisture/vibration resistant encapsulated packages Backlit displays optional 2.17"W x 0.92"H x 0.43"D 55.1mm W x 23.4mm H x 10.92mm D (LCD) Ordering Guide DMS-40LCD - 0/1 - 5 LCD Model Input Range 0/1 = 200mV/±2V 1/2 = ±2V/±20V 2/3 = 20V/±200V Datasheet -C RoHS Compliant Leave blank for standard models. Add -B for backlit models. Power Source: 5 = +5V 9 = +9V www.murata-ps.com/dms-40lcd www.murata-ps.com/dpm New! Ruggedized True-rms AC Voltmeters DMU-30ACV DMU 30ACV Ser Series Package Dimensions • • • • • • Measures and displays the true-rms value of complex AC voltages Ordering Guide Three input ranges: 20Vac, 200Vac and 300Vac DMU-30ACV- 1 - DR - C Daylight-readable LED display with automatic brightness adjustment Moisture & impact resistant package offers NEMA-4/IP65 protection RoHS Compliant Operates from universal 85-264Vac or 110-300Vdc supplies Daylight Readable Input Range Input circuit fully isolated from operating AC power source Measures and displays the true-rms values of complex AC waveforms. Large 0.56" (14.2mm) high super-bright red LED display is readable in full sunlight. An auto-dimming circuit automatically adjusts the display brightness for all viewing conditions. All DMU-30ACV AC voltmeters are designed to meet NEMA-4/IP65 for moisture resistance in outdoor applications. 2.85"L x 2.34"H x 1.76"D 72.4mm L x 59.4mm H x 44.7mm D 0 = 0 to 19.99Vac 1 = 0 to 199.9Vac 2 = 0 to 300Vac Datasheet www.murata-ps.com/dmu-30acv New! True-rms AC Voltmeters with Isolated Inputs • • • • • DMS-20RM Series Measures the rms value of complex AC voltages Three input ranges: 20Vac, 200Vac and 300Vac Two operating-supply options: 85-264Vac, or +10-40Vdc Input circuit fully isolated from operating power supply Fully encapsulated plastic package measures 1.38" x 0.88" (35mm x 22.4mm) • Large, easy-to-read, red LED display is visible from 12 feet (4m) Measures and displays the true-rms value of complex AC waveforms. No external isolation transformers or auxiliary power supplies are required. Simply connect the input signal and a power source to the two rear-mounted terminal blocks and the unit is fully operational. Package Dimensions 1.38"L x 1.60"H x 2.01"D 35.1mm L x 40.6mm H x 51.1mm D Ordering Guide DMS-20RM - 1 - AC1 - R - C RoHS Compliant Input Range 1 = 0 to 19.99Vac 2 = 0 to 199.9Vac 3 = 0 to 300Vac Datasheet LED Color R Power Supply AC1 = 85-264Vac @ 47/63Hz DC2 = +10–40Vdc www.murata-ps.com/dms-20rm New! Ruggedized DC Voltmeters DMU-30DCV DMU 30DCV Series Ser Package Dimensions • • • • • • Measure and accurately display DC voltages in harsh environments Ordering Guide Four input ranges: ±200mVdc, ±2Vdc, ±20Vdc, and ±200Vdc DMU-30DCV- 1 - DR - C Daylight-readable LED display with automatic brightness adjustment Moisture & impact resistant package offers NEMA-4/IP65 protection RoHS Compliant Operates from universal 85-264Vac mains, or 110-300Vdc supplies Daylight Readable Input Range Input circuit fully isolated from AC power supply Measures and displays dc signals as low as ±200mV and as high as ±200V. Large 0.56" (14.2mm) high super-bright red LED-display is readable in full sunlight. An auto-dimming circuit automatically adjusts the display brightness for all viewing conditions. All DMU-30DCV dc voltmeters are designed to meet NEMA-4/IP65 for moisture resistance in outdoor applications. 2.85"L x 2.34"H x 1.76"D 72.4mm L x 59.4mm H x 44.7mm D www.murata-ps.com/dpm 0 = 0 to ±199.9mVdc 1 = 0 to ±1.999Vdc 2 = 0 to ±19.99Vdc 3 = 0 to ±199.9Vdc Datasheet www.murata-ps.com/dmu-30dcv 5 AC Ammeters Built-in CTs for AC currents to 100A ACA-20PC Series Package Dimensions • 4 ranges from 0-2A to 0-100A • Functionally complete with on-board CTs; Red LEDs • 2A and 20A models include all connections for load and power • AC (85-264V @ 50/60Hz with "self-power") or DC (5-40V) power • UL/CSA recognized; 2000V isolation between load and supply ACA-20PC Series are the first digital AC ammeters to incorporate on-board current transformers. Simply pass the currentcarrying load wire through the on-board CT, apply power to the two power supply terminals, and you’re instantly measuring AC currents up to 100A. No external shunts or expensive CTs are required. 1.38"W x 1.36"H x 2.01"D 35.1mm W x 34.54mm H x 51.05mm D External CTs for AC currents to 2000A ACA5-20PC Series Package Dimensions • 14 ranges from 0-50A to 0-2000A; 42 models • Functionally complete; Bright red LED readouts • Scales/digitizes/displays the signal from 5A current transformers • UL/CSA recognized; Zero-burden inputs with 2000V isolation • AC (120/220V @ 50/60Hz ) or DC (5-40V) power Scales and displays the output of 5A current transformers (50:5A, 500:5A, 1000:5A, etc.). Fourteen input ranges measure AC currents from 0-50A to 0-2000A. They accept outputs from previously installed high-current CTs to instantly bring digital precision to older AC ammeter installations. 1.38"W x 1.36"H x 2.01"D 35.1mm W x 34.54mm H x 51.05mm D Now le availab Ts dC e d a le with Ordering Guide ACA-20PC-1-AC1-RL - C LED Model Input Range 1 = 1.999A 2 = 19.99A 3 = 50.0A 4 = 100.0A Datasheet RoHS Compliant LED Color RL Power Supply AC1 = 85-264Vac @ 50/60Hz DC1 = +5-40Vdc www.murata-ps.com/aca-20pc Ordering Guide ACA5-20PC- 1- AC1-RL- C LED Model RoHS Compliant Input Range 14 selections, 50.0A to 1999A. See data sheet for details Datasheet LED Color RL Power Supply AC1 = 85-264Vac @ 50/60Hz DC1 = +5-40Vdc www.murata-ps.com/aca5-20pc RMS Reading AC Ammeters Built-In CTs for AC currents to 50A ACA-20RM Series Package Dimensions • Accurately measure complex waveforms • Built-in CTs measure up to 50A • Self-powered from 120Vac or 220Vac • Large 0.37"/9.4mm red LED displays • UL and CSA recognized World’s first digital AC-ammeters with built-in CTs to directly measure the true-RMS value of complex, non-sinusoidal AC currents. Now available with split-core CTs for easy installation. 2.10"W x 1.40"H x 1.25"D 53.3mm W x 35.56mm H x 31.75mm D Three built-in CTs for AC currents to 100A • Measure and display true-rms current • Universal 85-264Vac (47-63Hz) operating supply range • Ideal for PDUs and backup power systems • Low power consumption • UL and CSA approvals pending ACM3P Series Package Dimensions 6 Measure and display the true-rms values of 2- or 3-phase ac mains current. All ACM3P ammeters are functionally complete, with built-in L1, L2, and L3 current transformers. 2.10"L x 1.43"H x 1.10"D 53.3mm L x 36.3mm H x 27.9mm D Ordering Guide ACA-20RM -1-AC3-RL- C LED Model RoHS Compliant LED Color RL Input Range Power Supply 0 = 199.9mA AC3 = 85-140Vac @ 50/60Hz 1 = 1.999mA AC4 = 170-264Vac @ 50/60Hz 2 = 19.99A 4 = 50.0A (with split-core flying-lead CT) 5 = 30.0A (with flying-lead CT) Datasheet www.murata-ps.com/aca-20rm Ordering Guide -4- AC1 -R- C ACM3P LED Model RoHS Compliant LED Color Input Range 4 = 100.0A Datasheet R G B Power Supply AC1 = 85-264Vac www.murata-ps.com/acm3p www.murata-ps.com/dpm AC Ammeters True-rms-AC Ammeters with 5A CT Inputs ACA5-20RM Series • • • • • • • Scales and displays the true-rms output of 5A current transformers Accurately measure complex AC current waveforms Available in three input ranges: 0-100A, 0 to 200A, or 0 to 500A Functionally complete: On-board, low-burden toroid sensor Easy-to-read, red LED display with 0.37"/9.4mm digits Two AC power options: 85-140Vac & 170-264Vac (50/60Hz) 2000V isolation between AC supply and external CT Murata’s ACA5-20RM Series AC ammeters accept the output of external 5A current transformers (CTs) and accurately display the true-rms value of complex, non-sinusoidal AC currents up to 500A. Operation and setup is straightforward: simply pass the external 5A CTs secondary output leads through the on-board toroid sensor, apply AC power, and the ammeter is fully operational. Package Dimensions 2.1"L x 1.40"H x 0.73"D 53.3mm L x 35.6mm H x 18.5mm D ACA-20RM-ALM Series ACA5-20RM-3- AC3-RL- C RoHS Compliant Input Range 3 = 100.0A 5 = 199.9A 9 = 500.0A Datasheet True-rms-AC Ammeters with Alarm Function • • • • • • • • Ordering Guide User–settable, visual alarm function Flashing display indicates overcurrent faults Measures the true-rms value of complex AC current waveforms Includes built-in current transformers Available in two input ranges: 0-30.0A, and 0 to 50A 50A model features convenient split-core CT Easy-to-read, red LED display with 0.37"/9.4mm high digits Two AC power options: 85-140Vac & 170-264Vac (50/60Hz) 2.1"L x 1.40"H x 0.73"D 53.3mm L x 35.6mm H x 18.5mm D RL Power Supply AC3 = 85-140Vac @ 47/63Hz AC4 = 170-264Vac @ 47/63Hz www.murata-ps.com/aca5-20rm Ordering Guide ACA-20RM - 4 - AC3 - RL-ALM-C RoHS Compliant Input Range 4 = 50.0A 5 = 30.0A Displays the true-rms value of non-sinusoidal AC currents and provide a user settable, over current alarm function. When the preset over current level is exceeded, the LED display continuously flashes from high to low intensity. A built-in current transformer greatly simplifies most AC ammeter applications: just pass the load conductor through the built-in current transformer, apply AC power, and the ammeter is fully operational. Package Dimensions LED Color Alarm Function LED Color RL Power Supply AC3 = 85-140Vac @ 47/63Hz AC4 = 170-264Vac @ 47/63Hz Datasheet www.murata-ps.com/aca-20rm-alm AC Current Transformers Part No. 7020-01036-0 7020-01037-0 7020-01038-0 7020-01039-0 7020-01040-0 7020-01041-0 39-3681407* 39-3681408* 39-3681409* 7020-01042-0 7020-01043-0 7020-01044-0 7020-01045-0 7020-01046-0 Current Ratio Accuracy Burden--VA (Ohms) 50:5 75:5 100:5 150:5 200:5 250:5 300:5 400:5 500:5 600:5 750:5 1000:5 1500:5 2000:5 ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% 1.5 (0.06) 3.0 (0.12) 3.0 (0.12) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40) 12.5 (0.50) 12.5 (0.50) 20.0 (0.80) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 12.5 (0.50) 15.0 (0.60) These 5A output, “donut” style AC current transformers can be used with our ACA5-20PC and ACA5-20RM series AC ammeters to measure currents from 50 to 2000 Amps. All models have 2-foot-long (0.6m) wire leads and are UL recognized components. *Not available as RoHS compliant. www.murata-ps.com/dpm 7 AC Power Meters Four-Function AC Power Meters • • • • ACM20 Series • • • • • Displays AC Volts, Amps, Watts, and Power Factor Two display modes: continuous auto-cycling or fixed reading Universal 85-264Vac (47-63Hz) operating range Built-in CTs simplify installation; choice of 10A (999.9 Watts max.) 32A (9999 Watts max.) or 100A (26.4kW max.) ranges Ideal for power distribution units (PDUs) in IT installations True-rms readings of complex voltage and current waveforms One-piece polycarbonate housing fits ‘0U’ & ‘1U’ racks Bright red LED-display with four annunciators Optional Frequency reading models (0.1Hz resolution) Ordering Guide A C M 2 0 - 4 - AC1 - R - F - C Input Range 4 = 100.0A 5 = 32.0A LED Color 2.10"L x 1.43"H x 1.10"D 53.3mm L x 36.3mm H x 27.9mm D R Power Supply AC1 = 85-264Vac Displays the most critical measurements in mains-powered equipment: voltage, amperage, active power (watts or Kilowatts), and power factor. A front panel selector-switch provides two modes of operation: a fixed reading of any of the four parameters, or a continuous cycling through all four measurements. All ACM20 multifunction power meters include built-in current transformers—no other user-supplied components are required. Package Dimensions RoHS Compliant Leave blank for Power Factor Reading models. Add F for Frequency Reading models. Datasheet www.murata-ps.com/acm-20 DC Ammeters Built-in shunts for DC currents to 20A DCA-20PC Series Package Dimensions • • • • • 6 ranges from 0-200μA to 0-20A; 24 models Functionally complete with on-board 20mV shunts On-board load/supply connections for 3-wire operation 8-36Vdc isolated supplies for high-side shunts 5-40Vdc supplies for 5/12/24V; 48V telecom option The first digital DC ammeters to include built-in low loss shunts for measuring currents up to 20A. Six ranges provide for precision measurement of DC currents from 200μA to 20A. These ammeters are 100% self-contained, so no calibration or usersupplied components are required. 1.38"W x 1.46"H x 1.04"D 35.1mm W x 37.08mm H x 26.41mm D ailable Now av ower -p w with lo green d blue an ! LEDs Ordering Guide DCA-20PC-1-DC1-RL - C LED Model Input Range 6 selections, 199.9μA-19.99A. See data sheet for details. Datasheet RoHS Compliant LED Color RL PGL BL Power Supply DC1 = 5-40Vdc non-isolated (available with red, green, and blue LEDs) DC4 = 8-36Vdc isolated power www.murata-ps.com/dca-20pc DC Ammeters External shunts for DC currents to 2000A DCA5-20PC Series Package Dimensions 8 • • • • • 11 ranges from 0-1A to 0-2000A; 44 models Functionally complete with on-board interface circuitry Scales/digitizes/displays the output of 50/100mV shunts Wide-range, isolated/non-isolated power; 48V telecom option Subminiature packages with screw-style terminal blocks Scales and displays the output of 50mV and 100mV DC-shunts. Twenty-five ranges provide for measurement of DC currents from 1A to 2000A. With the exception of an external shunt, the unit is 100% self-contained—no calibration or additional components are required. 1.38"W x 1.46"H x 1"D 35.1mm W x 37.08mm H x 25.4mm D ailable Now av ower -p w lo h it w green d n a e blu LEDs! Ordering Guide DCA5-20PC-1-DC1-RL-C LED Model Input Range 11 selections, 5A/50A/500A to 2000A. See data sheet for details. Datasheet RoHS Compliant LED Color RL PGL BL Power Supply DC1 = 5-40Vdc non-isolated (available with red, green, and blue LEDs) DC4 = 8-36Vdc isolated power www.murata-ps.com/dca5-20pc www.murata-ps.com/dpm 2-Wire AC Voltmeters DMS-20 LM Series • The easiest-to-use products of their type • 120V model plugs directly into wall outlets • Screw-terminal inputs simplify panel mounting • Large, easy-to-read, red, green, or blue LED displays • 3-digit readouts; ±1V accuracies • Rugged encapsulated construction Component-size, self-contained, low-cost, 2-wire AC voltmeters require no additional components or auxiliary power. Just connect an AC voltage to their two rear terminals and you are instantly reading AC voltages with one-volt resolution. The large (0.37"/9.4mm), bright red, blue, or green LED display makes DMS-20PC-LM voltmeters easily readable under any lighting conditions. Display Type LED Package Dimensions Input Range Resolution Accuracy Maximum Current Drain Inches mm 85-264Vac @ 47-63Hz 1V ±1V 50mArms 1.38 x 0.88 x 1 85-264Vac @ 47-63Hz 1V ±1V 50mArms 1.38 x 0.88 x 1 85-264Vac @ 47-63Hz 1V ±1V 50mArms 85-264Vac @ 47-63Hz 1V ±1V 85-264Vac @ 47-63Hz 1V ±1V 85-264Vac @ 47-63Hz 1V 85-140Vac @ 350-450Hz 240-310Vac @ 47-99Hz 1V Model Number (Display Color) Datasheet Title 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-C (Red) DMS-20PC-1-LM 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-F-C (Red) DMS-20PC-1-LM 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-B-C (Blue) DMS-20PC-1-LM 50mArms 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-BF-C (Blue) DMS-20PC-1-LM 50mArms 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-G-C (Green) DMS-20PC-1-LM ±1V 50mArms 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-LM-GF-C (Green) DMS-20PC-1-LM ±1V 50mArms 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-2-LM-C (Red) DMS-20PC-2-LM For full product data download a datasheet at www.murata-ps.com Panel-mount front bezels, with or without sealing gaskets, may be ordered separately (see www.murata-ps.com/dpm). AC voltmeters have screw terminals on the back of their packages. DMS-20PC-1-LM-F has "blade" terminals that plug directly into USA-style wall outlets. 2-Wire Frequency Meters DMS-20 FM Series • Ideal for emergency power-generating equipment • 3-digit readouts accurate to ±0.1 Hertz (60Hz models) • 50/60Hz or 400Hz versions; 120/220Vac inputs • Easy-to-read, large (0.4"/10.2mm), red LED displays • 60Hz/120V model plugs directly into wall outlets • Rugged encapsulated construction The world’s smallest, self-powered, AC frequency meters. Simply connect the AC line to the two rear terminals, and the unit is fully operational. All models feature encapsulated construction and an ultra-stable, quartz-crystal-controlled, microcontroller to provide accuracies of ±0.1Hz (50/60Hz models) or ±1Hz (400Hz model) over the entire operating temperature range of –25 to +60°C. Display Type LED Package Dimensions Input Range Resolution Accuracy Maximum Current Drain Inches mm 85-140Vac @ 47-99Hz 0.1Hz ±0.1Hz 50mArms 1.38 x 0.88 x 1 85-140Vac @ 47-99Hz 0.1Hz ±0.1Hz 50mArms 1.38 x 0.88 x 1 85-140Vac @ 350-450Hz 1Hz ±1Hz 50mArms 170-246Vac @ 47-99Hz 0.1Hz ±0.1Hz 50mArms Model Number Datasheet Title 35.1 x 22.4 x 25.4 DMS-20PC-1-FM-C DMS-20PC-FM 35.1 x 22.4 x 25.4 DMS-20PC-1-FM-F-C DMS-20PC-FM 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-2-FM-C DMS-20PC-FM 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-3-FM-C DMS-20PC-FM For full product data download a datasheet at www.murata-ps.com Panel-mount front bezels, with or without sealing gaskets, may be ordered separately (see www.murata-ps.com/dpm). All AC frequency meters have screw terminals on the back of their packages. The DMS-20PC-1-FM-F has “blade” terminals that plug directly into USA-style wall outlets. All LED displays are red and have a digit height of 0.4"/10.2mm. www.murata-ps.com/dpm 9 2-Wire DC Voltmeters 12V and 24V Battery Monitors Ideal replacements for analog panel meters DMS-20 DCM Series • Monitor 9/12/24/28/36V batteries or power supplies • LED or LCD displays with 0.37"/9.4mm digit heights • Input ranges: 12V models: 4.5-19.99V (LED), 6.5-18V (LCD) 24V models: 8-50.0V (LED and LCD) • ±10mV accuracy (12V models); ±0.1V (24V models) • 13mA/3mA (LED/LCD) maximum current drains • • • • • • • Built-in "VDC" annunciator (LCD models) Reverse polarity protected Self-powered, only two connections required Reliable encapsulated construction Subminiature 1.38" x 0.88" x 1.0" packages –25 to +60°C operating temperature range (LED) Available in red, blue, or green LEDs Great replacements for older, hard-to-read, analog panel meters. Simply connect your DC voltage across the two rear terminals and the meters are fully operational—no additional components or power supplies are required. Their large, 0.37" (9.4mm), displays can be easily read from 15 feet away. Built-in reverse polarity protection assures simple, trouble-free installation. –48V for Distributed Power Systems • Precision readout for –48Vdc power buses in telecom, datacom and computer/networking equipment • –36.0 to –75.0Vdc input range • 0.1V resolution; ±0.1V accuracy • Negligible power consumption (13mA, max.) • • • • • Self-powered, only two connections required –25 to +60°C operating temperature range Withstands –200V input transients Reverse polarity protected to +100V Subminiature 1.38" x 0.88" x 1.0" plastic package Designed for monitoring –36 to –75V bus voltages in modern telecom, datacom and computer equipment. Compact size, large LED display, and low power consumption (8mA typ. at –48V) make it the ideal replacement for analog panel meters. Display Type LED LCD Input Range Resolution Accuracy Maximum Current Drain Package Dimensions Inches mm Model Number (Display Color) Datasheet Title +2 to +11.00Vdc 0.01V ±0.01V 50mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-3-DCM-C (Red) DMS-20PC-3-DCM +4.50 to +19.99Vdc 0.01V ±0.01V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-0-DCM-C (Red) DMS-20PC-0/1/2/8-DCM +4.50 to +19.99Vdc 0.01V ±0.01V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-0-DCM-B-C (Blue) DMS-20PC-0/1/2/8-DCM +4.50 to +19.99Vdc 0.01V ±0.01V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-0-DCM-G-C (Green) DMS-20PC-0/1/2/8-DCM +8.0 to +50.0Vdc 0.1V ±0.1V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-DCM-C (Red) DMS-20PC-0/1/2/8-DCM +8.0 to +50.0Vdc 0.1V ±0.1V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-DCM-B-C (Blue) DMS-20PC-0/1/2/8-DCM +8.0 to +50.0Vdc 0.1V ±0.1V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-1-DCM-G-C (Green) DMS-20PC-0/1/2/8-DCM +30.0 to +199.9Vdc 0.1V ±0.1V 7mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-8-DCM-C (Red) DMS-20PC-0/1/2/8-DCM DMS-20PC-0/1/2/8-DCM +30 to +264Vdc 1V ±1V 7mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-2-DCM-C (Red) –4.50 to –19.99Vdc 0.01V ±0.01V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-4-DCM-C (Red) DMS-20PC-4/5/6-DCM –18.0 to –50.0Vdc 0.1V ±0.1V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-5-DCM-C (Red) DMS-20PC-4/5/6-DCM DMS-20PC-4/5/6-DCM –30.0 to –264Vdc 1V ±1V 7mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-6-DCM-C (Red) –36.0 to –75.0Vdc 0.1V ±0.1V 13mA 1.38 x 0.88 x 1 35.1 x 22.4 x 25.4 DMS-20PC-7-DCM-C (Red) DMS-20PC-7-DCM +6.50 to +18.00Vdc 0.01V ±0.01V 3mA 1.38 x 0.88 x 0.66 35.1 x 22.4 x 16.76 DMS-20LCD-0-DCM-C DMS-20LCD-0/1-DCM +8.0 to +50.0Vdc 0.1V ±0.1V 2.5mA 1.38 x 0.88 x 0.66 35.1 x 22.4 x 16.76 DMS-20LCD-1-DCM-C DMS-20LCD-0/1-DCM +18.0 to +90.0Vdc 0.1V ±0.1V 3mA 1.38 x 0.88 x 0.66 35.1 x 22.4 x 16.76 DMS-20LCD-2-DCM-C DMS-20LCD-2/3-DCM +50.0 to +150.0Vdc 0.1V ±0.1V 2mA 1.38 x 0.88 x 0.66 35.1 x 22.4 x 16.76 DMS-20LCD-3-DCM-C DMS-20LCD-2/3-DCM For full product data download a datasheet at www.murata-ps.com Both LED and LCD displays have a digit height of 0.37"/9.4mm. Panel-mount front bezels, with or without sealing gaskets, may be ordered separately (see www.murata-ps.com/dpm). 10 www.murata-ps.com/dpm Loop-Powered 4-20mA Readouts • • • • • • DMS-20 4/20 Series Package Dimensions Totally loop powered—no external supplies 3½ and 4½ digit resolutions; LED/LCD displays Industry’s only loop-powered, full-size LED readouts Small packages; Large digits: 0.37"/9.4mm Optional unipolar, bipolar, or “positive" polarities DIP-switch selectable span/offset/decimal points Derives operating power directly from the 4-20mA loop, providing for simple 2-wire operation. Display options include 3½ and 4½ digits; LCD models feature loop burdens as low as 1.8V. All models feature non-interacting, multiturn trimpots for offset and span adjustments. 1.38"W x 0.88"H x 0.95"D (LED) or 0.9"D (LCD) 35.1mm W x 22.4mm H x 24.13mm D (LED) or 22.86mm D (LCD) Ordering Guide DMS-20PC-4/20 Series Unipolar, bipolar, and positive reading, DMS-20LCD-4/20 Series loop-powered LED meters Unipolar, bipolar, and positive reading, loop-powered LCD meters DMS-30LCD-4/20 Series Unipolar, bipolar, positive, and inverse reading, loop-powered LCD meters DMS-40LCD-4/20S 4½ digit loop-powered LCD meter Datasheets LED: DMS-20PC-4/20 Series LCD: DMS-20, -30, -40LCD-4/20 Series Locally Powered 4-20mA Readouts DMS-30, -40 Series Package Dimensions Ordering Guide • 3½ and 4½ digit resolutions; LED/LCD displays • 4 LED options including low-current & hi-intensity red • 3 power-supply options: +5V, +24V "I" or 7.5-32V DMS-30PC-4/20S Series • 24V "I" models isolate loop inputs from power ground DMS-40PC-4/20S Series • DIP-switch selectable span/offset/decimal points • On-board gain/span and zero/offset trim pots Current loop displays can be powered from popular 5V, 12V, or 24V supplies and are available with isolated or non-isolated current loop inputs. All models feature a 2V maximum loop burden and large, easy-to-read, digits in a choice of red, blue, or green LEDs. 2.17"W x 0.92"H x 1.02"D 55.1mm W x 23.4mm H x 25.91mm Datasheet Available in red, green, and blue LEDs Available in red and green LEDs Back View LED: DMS-30PC-4/20 & DMS-40PC-4/20 Series 0-5V & 0-10V Process Monitors • • • • • DMS-20PC-0/5 Series Package Dimensions 3½ digit readouts, 0-1V, 0-5V, 1-5V, 0-10V inputs 4 connections—2 for signal, 2 for power Single +5V or +5-40V supply (9mA drain @24V) DIP-switch selectable span/offset/decimal points On-board gain/span and zero/offset trim pots Provides the ultimate in convenience when you need to convert 0-5V or 0-10V analog signals to common process parameters (temperature, pressure, flow, etc.). Built-in DIP-switch activated attenuators and two trim pots greatly simplify setup to get you up and running quickly. LED colors include, red, blue, green, and high-intensity red. 1.38"W x 0.88"H x 0.95"D 35.1mm W x 22.4mm H x 24.13mm D www.murata-ps.com/dpm Ordering Guide DMS-20PC-0/5-5RS-C +5V supply, standard-intensity red LEDs DMS-20PC-0/5-5GS-C +5V supply, standard-intensity green LEDs DMS-20PC-0/5-5BS-C +5V supply, bright blue LEDs DMS-20PC-0/5-5RL-C +5V supply, low-power red LEDs DMS-20PC-0/5-5RH-C +5V supply, high-intensity red LEDs DMS-20PC-0/5-24RL-C +5V to +40V supply, low-power red LEDs Datasheet LED: DMS-20PC-0/5 Series 11 Panel Meter Accessories AC Current Transformers These 5A output, “donut” style AC current transformers can be used with our ACA520PC and ACA5-20RM series AC ammeters to measure currents from 50 to 2000 Amps. All models have 2-foot-long (0.6m) wire leads and are UL recognized components. Part No. Applications Boards These application / prototype boards are designed to solder to the back of many of our 12-pin DMS-20 and DMS-30 Series meters. These rugged, low-cost boards can quickly configure DMS meters for a wide variety of popular applications, such as engineering scaling and rms-to-DC conversion. All application boards feature either screw-style terminal blocks or Molex brand crimp connections for connecting signal and power lines. Convenient solder gaps are provided for decimal point selection. Description Multi-Purpose Application Board for DMS-30 -40 Series Multi-Purpose Application Board for DMS-20PC/LCD Series AC Primary Power Application Board for DMS-30PC-X-RL and DMS-40LCD Meters DC-DC Converter and Isolation Board for DMS-30PC/LCD AC-to-RMS Converter Board for DMS-30PC/LCD Meters Part No. DMS-EB-C DMS-EB2-C DMS-EB-AC/DC-C DMS-EB-DC/DC-C DMS-EB-RMS-C Thirteen 50mV and 100mV, base-mounted DC shunts are designed to connect directly to the rear-mounted terminal block on DCA5-20PC DC ammeters. All shunts feature ultra-stable manganin shunt elements that have an accuracy of ±0.25% (max.). Rated Current/Output 50A/50mV 5A/50mV 20A/50mV 100A/50mV 150A/50mV 200A/50mV 300A/50mV 500A/50mV 800A/50mV 1000A/50mV 1200A/50mV 10A/100mV 100A/100mV Resistance @ 25°C 0.001 0.01 0.0025 0.0005 0.00033 0.00025 0.000167 0.0001 0.0000625 0.00005 0.0000417 0.01 0.001 High-Efficiency Switching Regulators 78xxSR series switching regulators can be used with many of our application boards to enable DMS meters to operate from DC power sources as high as +36Vdc. Unlike conventional linear devices, these switching regulators are so efficient that no heat sinks or fans are required for full-load operation. Part No. Output Voltage Standard Pin Package 7803SR-C +3.3Vdc 7805SR-C +5.0Vdc 7812SR-C +12.0Vdc 78SR-3.3/2-C +3.3Vdc 78SR-5/2-C +5.0Vdc Horizontal Pin Package 7803SRH-C +3.3Vdc 7805SRH-C +5.0Vdc 7812SRH-C +12.0Vdc 78SRH-3.3/2-C +3.3Vdc 78SRH-5/2-C +5.0Vdc 12 Current Ratio Accuracy Burden--VA (Ohms) 50:5 75:5 100:5 150:5 200:5 250:5 300:5 400:5 500:5 600:5 750:5 1000:5 1500:5 2000:5 ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% 1.5 (0.06) 3.0 (0.12) 3.0 (0.12) 6.0 (0.24) 8.0 (0.32) 10.0 (0.40) 12.5 (0.50) 12.5 (0.50) 20.0 (0.80) 10.0 (0.40) 10.0 (0.40) 10.0 (0.40) 12.5 (0.50) 15.0 (0.60) *Not available as RoHS Bezels and Panel Cutout Punches DC Current Shunts Murata-PS Part No. 3020-01096-0 3020-01097-0 3020-01098-0 3020-01099-0 3020-01100-0 3020-01101-0 3020-01102-0 3020-01103-0 3020-01104-0 3020-01105-0 3020-01106-0 3020-01107-0 3020-01108-0 7020-01036-0 7020-01037-0 7020-01038-0 7020-01039-0 7020-01040-0 7020-01041-0 39-3681407* 39-3681408* 39-3681409* 7020-01042-0 7020-01043-0 7020-01044-0 7020-01045-0 7020-01046-0 Output Current Input Voltage 0.5A 0.5A 0.4A 2.0A 2.0A +7.5-36Vdc +7.5-36Vdc +15-36Vdc +8-32Vdc +8-32Vdc 0.5A 0.5A 0.4A 2.0A 2.0A +7.5-36Vdc +7.5-36Vdc +15-36Vdc +8-32Vdc +8-32Vdc Four ABS plastic bezel assemblies simplify panel mounting of DMS series meters. These bezel assemblies are available with and without EPDM sealing gaskets for applications that demand environmental protection from dust and moisture. Two matching panel cutout punches make accurate mounting holes for prototype or small production runs. Description Bezel for DMS-30 and DMS-40 Bezel with EPDM sealing gasket for all DMS-30 -40 Meters Bezel for all DMS-20 Meters Bezel with EPDM sealing gasket for all DMS-20 Meters Panel cutout punch for DMS-30 and DMS-40 Meters Panel cutout punch for DMS-20 Meters Part No. DMS-BZL1-C DMS-BZL2-C DMS-BZL3-C DMS-BZL4-C DMS-30-CP DMS-20-CP Panel Mount Connectors Six-position Molex brand connector-housings with matching crimp terminals are available to make power and signal connections to panel mounted DMS series meters. Each typical DMS meter installation requires two housings and 12 crimp terminals. See the individual product data sheet for more information. Description 6-position connector housing. Use with crimp terminal 4400-01032-0. Crimp terminal for connector housing 4320-01069-0. Accepts 22-26 AWG wire. Part No. 4320-01069-0 4400-01032-0 Miscellaneous Items Description Unpopulated DMS-EB2 PC-Board Unpopulated DMS-EB PC-Board DMS-20 Retaining Clip DMS-30 Retaining Clip DMS-30 Red Case DMS-20 Red Case DMS-30 Bezel and Red Filter DMS-20 Bezel and Red Filter DMS-30 Panel Mount Adapter DMS-20 Panel Mount Adapter 12-position PC-Board Socket 6-position PC-Board Socket Part No. 5302-01243-0 5302-01236-0 5252-01127-0 5252-01126-0 5252-01145-0 5252-01130-0 5252-01160-0 5252-01161-0 4652-01101-0 4652-01100-0 4320-01072-0 4320-01074-0 www.murata-ps.com/dpm Energy gy Efficient Products Low Power LED Meters and Accessories 3½ and 4½ Digit DC Voltmeters • • • • Replacements placements for hard-to-read LCD displays Increase crease battery life in portable applications Eliminate i t th the needd ffor ffans andd hheatt sinks i k Excellent long-term reliability Series Display Options Digit Height Power Consumption DMS-20PC-X-RL 3½ Digit Red LED 0.37in./9.4mm 8mA @ 5Vdc Operating Temp. 0 to +60°C DMS-30PC-X-XL 3½ Digit Red, Green, or Orange LED LED 0.56in./14.2mm 15mA @ 5Vdc 0 to +60°C DMS-40PC-X-RL 4½ Digit Red LED 0.52in./13.2mm 35mA @ 5Vdc 0 to +50°C 4-20mA Process Monitors Series Display Options Designed to provide outstanding performance DMS-20PC-4/20 3½ Digit Red LED and ultra-low power consumption. These highefficiency LED display instruments and switching High-Efficiency Switching Regulators Series Voltage Outputs power supplies can significantly reduce long-term 78XXSR 3.3V, 5V, 12V energy costs. Digit Height Loop Drop Operating Temp. 0.37in./9.4mm +4Vdc @ 20mA 0 to +60°C Package Efficiency Operating Temp. LM78XX compatible SIP To 95% –40 to +70°C Quality Assured During the last vibration, the meter pulled away from the bezel assembly (which had melted during the +145°C temperature extreme!), and one segment of one LED digit went blank. Now you know why we confidently specify our standard digital panel meters with an operating temperature range of 0 to +60°C and boast about their rugged vibration and moistureresistant encapsulated packages. HIGHLY ACCELERATED LIFE TEST (HALT) 150 120 90 60 30 30 20 0 0 Random Vibration (Gs) The Engineering Team then decided to see how much stress it would take to make a second meter succumb. With the maximum applied input voltage, the meter (mounted in a metal panel using a Murata-PS bezel assembly) was subjected to the following: operating case-temperature extremes of +145°C and –75°C; non-operating cold soak at –75°C (after which the meter still operated correctly); three temperature cycles (–65 to +125°C) at a transition rate of 30°C per minute; 15 minutes of 3-axis random longitudinal and rotational vibration at 10 to 15Gs; a temperature spike down to –65°C; and lastly, more vibration. Upon troubleshooting, the Engineers discovered all meter electronics—including the drive circuit to the failed LED segment—were working fine. The failure was traced to the display itself. The Engineers’ report gave the device a “conditional pass,” pending failure analysis of the LED display. Temperature (°C) The QA Engineering Team that instituted our Design-for-Reliability Program performed routine HALT (Highly Accelerated Life Testing) on a randomly selected 2-wire meter and the device “passed.” Devices are not supposed to pass HALT. The intent of HALT is to “reveal latent defects or design weaknesses that may eventually cause field failures” by subjecting devices to progressively higher stress levels, until something breaks. –30 –60 –90 20 40 60 80 100 120 140 160 180 200 Test Time (minutes) Custom Designs For high-volume OEM applications, we can quickly and easily modify any of our standard LED or LCD-display instruments to accommodate your specific needs. For minimal additional cost, you can have a finished product that displays the exact readings you want for the input signal you are monitoring, without the need for any user modifications or external components. The products shown here are full customs, designed to meet their customers’ unique physical and electro-optical requirements. Both products incorporate user-selectable range settings via 2-position slide switches and precision trimpots. We even designed a completely new LED for the 1-inch round (25.4mm) display. Contact our Applications Engineering Group for complete details. www.murata-ps.com/dpm 13 Join the Meter Madman at www.murata-ps.com/dpm for the very latest product information including comprehensive datasheets, application notes, and where to buy. Find stock ...globally bally Search for parts ts in stock with our distributors and at our own sites Search for up to four parts at a time Go straight to a distributor’s shopping cart New Product Announcements 14 All the very latest products from Murata Power Solutions Links to datasheets Opt to receive via email or RSS Feed Product Videos Our design engineers talk about the latest challenges in power design Twitter.com If you’re into power, you should follow us on our weekly tweets You can find us at twitter.com/murataps www.murata-ps.com/dpm DC-DC Converters Murata Power Solutions is proud to offer the largest range of DC-DC Converters available from a single manufacturer. Our ever-increasing product portfolio includes all the options you’ll ever need, including: • Isolated DC-DC Converters Single, dual, bipolar/dual, and triple output from 0.25 to 450 Watts • Point-of-Load Converters From 0.6 to 15V outputs (including userselectable versions) at current levels from 1 to 16A Magnetics AC-DC Power Supplies Two essential elements of the vast majority of power electronics applications are filtering and isolation. Whether you need to reduce noise or protect vital components, Murata Power Solutions can offer a wide range of products to suit your requirements. We can develop AC-DC power supplies to meet almost every possible application requirement in terms of power, performance, efficiency, communications, protection, size, approvals compliance and cooling requirements. • Inductors & Transformers Over 800 highly advanced and optimized iinductor and transformer solutions with the emphasis on miniaturization, reliability, and e ease of handling. These power oriented designs e ccomprise the following through-hole & surfacemount products: m • IInductors •C Common-mode chokes •P Pulse transformers •C Current sense transformers •A Agency approved transformers •D Databus isolators •C Custom designs Murata Power Solutions Inc. reserves the right to alter or improve the specifications, data, descriptions, internal design, or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. While such information is believed to be accurate as indicated herein, Murata Power Solutions, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, Murata Power Solutions, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible www.murata-ps.com/dpm • Front Ends for Distributed Power Architectures AC to 12Vdc or 48Vdc ultra compact front end supplies for distributed power architectures with active power factor correction plus industry leading efficiency & density • Open Frame High-efficiency, single output solutions in 1U chassis, 75W to 400W • Custom Solutions for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. The products are not suitable for use as Safety Critical Components,1 in Life Support Devices2 or on aircraft. Murata Power Solutions, Inc.’s liability for any breach of warranty is limited as set forth in Murata Power Solutions, Inc.’s standard warranty applicable to the product (“The Warranty”). The warranty is exclusive and offered in lieu of all other express, implied, or statutory warranties including, without limitation, implied warranties of merchantability and fitness for a particular purpose. In no event shall Murata Power Solutions, Inc.’s liability for any damages arising out of any sale of products to buyer, and regardless of the legal theory on which such damages may be based, exceed the amount that supplier has received as payment for such products and under no circumstances shall supplier be subject to any consequential, incidental, indirect, special, or contingent damages whatsoever, including but not limited to damages for Custom product solutions from 100W to 5kW Leverage existing product platforms for modifications lost profits or goodwill, even if supplier was advised of the possibility of such damage. No part of this publication may be copied, transmitted, or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from Murata Power Solutions, Inc. 1 Safety Critical Component means any component whose failure to perform could cause the failure of, or affect the operation of a Life Support Device. 2 Life Support Device means any device, system or ancillary equipment intended for implant into the body or used in relation to supporting or sustaining life. © Murata Power Solutions, Inc. 2015—All rights reserved 15 Global locations For details please visit www.murata.com Note For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. Murata Manufacturing Co., Ltd. www.murata.com 1 Aircraft equipment 2 Undersea equipment 3 Medical equipment 4 Traffic signal equipment 5 Data-processing equipment 6 Aerospace equipment 7 Power plant equipment 8 Transportation equipment (vehicles, trains, ships, etc.) 9 Disaster prevention / crime prevention equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above 3 Product specifications in this catalog are as of August 2013. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and & CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. ©2015 Murata Power Solutions, Inc. MPS_DPM_PDB3.0 1 Export Control