2200R Series www.murata-ps.com Radial Lead Inductors SELECTION GUIDE Order Code FEATURES RoHS compliant Radial format Up to 1.62A IDC 10μH to 68mH Low DC resistance Miniature size PCB mounting MIL-I-23053/5 class I sleeving Fully tinned leads Supplied in bags of 100 Compatible with RoHS soldering systems Backward compatible with Sn/Pb soldering systems Custom parts available Inductance, (1kHz, 0.1VAC) DC Current1 DC Resistance ±10% μH Max. A Max. Ω Q 0.05 0.07 0.09 0.14 0.22 0.28 0.39 0.54 0.83 1.21 1.65 2.64 3.63 6.49 8.58 11.0 15.0 22.0 37.4 51.7 82.5 118.8 169.4 242.0 65 60 50 50 50 90 90 90 100 100 110 120 120 130 90 140 150 145 155 140 100 95 90 70 22R103C 22R153C 22R223C 22R333C 22R473C 22R683C 22R104C 22R154C 22R224C 22R334C 22R474C 22R684C 22R105C 22R155C 22R225C 22R335C 22R475C 22R685C 22R106C 22R156C 22R226C 22R336C 22R476C 22R686C 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1.0mH 1.5mH 2.2mH 3.3mH 4.7mH 6.8mH 10.0mH 15.0mH 22.0mH 33.0mH 47.0mH 68.0mH 1.62 1.35 1.08 0.90 0.77 0.77 0.67 0.52 0.43 0.38 0.31 0.25 0.17 0.13 0.11 0.10 0.081 0.072 0.063 0.054 0.045 0.036 0.027 0.018 Q at f kHz SRF Nom. f Nom. MHz 1000 500 500 500 500 100 100 100 100 100 100 100 100 100 50 150 150 150 150 150 50 50 50 50 21.2 19.4 17.0 11.4 10.9 8.7 7.0 5.7 4.4 3.7 3.2 2.5 2.1 1.9 1.7 1.2 0.95 0.85 0.62 0.51 0.34 0.28 0.25 0.20 TYPICAL CORE/WIRE CHARACTERISTICS DESCRIPTION The 2200R Series is a general purpose range of inductors suitable for low to medium current applications. Their small footprint makes them ideal for high density applications where a chip inductor will not cope with the power requirement. Inductance Temperature Coefficient Resistance Temperature Coefficient Curie Temperature (TC) Saturation Flux (BSAT) 350ppm 3900ppm 190°C 325mT ABSOLUTE MAXIMUM RATINGS Operating free air temperature range -25°C to 70°C Storage temperature range -40°C to 125°C SOLDERING INFORMATION2 Peak wave solder temperature 300˚C for 10 seconds Pin finish Hot dipped tin All specifications typical at TA=25°C 1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_2200RC_C02 Page 1 of 2 2200R Series Radial Lead Inductors PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS 0.283±0.020 (7.2±0.50) Ø0.047 +0.006 +0.15 Ø1.20 -0.000 -0.00 103C All dimensions in inches (mm) 1.772±0.130 (45.00±3.30) 1.614±0.130 (41.00±3.30) 0.335±0.020 (8.5±0.50) 0.413 (10.50) Max. 0.118(3.00) 0.024±0.002 (0.60±0.05) All dimensions in inches (mm). Package weight 1.3g Typ. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2011 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_2200RC_C02 Page 2 of 2