2200RM Series www.murata-ps.com Bobbin Wound Surface Mount Inductors SELECTION GUIDE FEATURES RoHS compliant Up to 2.52A IDC 10μH to 68mH Low DC resistance Surface mount Compact size Tape and reel packaging Compatible with RoHS soldering systems Backward compatible with Sn/Pb soldering systems Custom parts available DESCRIPTION Order Code Inductance, (1kHz, 0.1VAC) ±10% μH DC Current1 Max. A 22R103MC 22R153MC 22R223MC 22R333MC 22R473MC 22R683MC 22R104MC 22R154MC 22R224MC 22R334MC 22R474MC 22R684MC 22R105MC 22R155MC 22R225MC 22R335MC 22R475MC 22R685MC 22R106MC 22R156MC 22R226MC 22R336MC 22R476MC 22R686MC 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1.0mH 1.5mH 2.2mH 3.3mH 4.7mH 6.8mH 10.0mH 15.0mH 22.0mH 33.0mH 47.0mH 68.0mH 2.52 2.08 1.81 1.31 0.99 0.84 0.80 0.64 0.50 0.42 0.37 0.30 0.21 0.16 0.14 0.12 0.10 0.077 0.068 0.055 0.044 0.037 0.033 0.026 DC Resistance Max. Ω 0.05 0.07 0.09 0.14 0.22 0.28 0.39 0.54 0.83 1.21 1.65 2.64 3.63 6.49 8.58 10.0 13.2 22.0 37.4 49.5 82.5 110.0 154.0 242.0 ABSOLUTE MAXIMUM RATINGS The 2200RM Series is a surface mount alternative to our 2200R Series. It is a general purpose range of inductors suitable for low to medium current applications. Their small footprint makes them ideal for high density applications where a chip inductor will not cope with the power requirement. Operating free air temperature range Storage temperature range -40°C to 85°C -40°C to 150°C SOLDERING INFORMATION2 Peak reflow temperature Pin finish 250˚C Hot dipped tin PACKAGE SPECIFICATIONS Mechanical Dimensions 7.50± 0.4 (0.295± 0.016) Recommended Pad Layout 7.80± 0.4 (0.307± 0.016) 2.20 (0.087) 686MC 8.00 (0.315) 7.00± 0.4 (0.276± 0.016) 7.50 (0.295) R1.00 (0.039) Package weight: 1.30g Typ. Unless otherwise stated, all dimensions in mm (inches) ± 0.25 (0.010). All specifications typical at TA=25°C 1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_2200RMC_A02 Page 1 of 3 2200RM Series Bobbin Wound Surface Mount Inductors INDUCTANCE Vs CURRENT 100000 68mH 10mH Inductance, L (μH) 10000 1mH 1000 100μH 100 10μH 10 1 0.001 0.01 0.1 1 10 Current, IDC (A) TEMPERATURE Vs CURRENT 60 Temperature rise above ambient, t (ºC) 10mH 1mH 50 100μH 10μH 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Current, IDC (A) INDUCTANCE Vs FREQUENCY 1000000 68mH Inductance, L (μH) 100000 10mH 10000 1mH 1000 100μH 100 10μH 10 1 10 100 1000 10000 Frequency, (kHz) www.murata-ps.com/support KMP_2200RMC_A02 Page 2 of 3 2200RM Series Bobbin Wound Surface Mount Inductors TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS Ø331 [13.03] Max. 23.9-27.4 [0.94-1.08]* 100 ±0.5 [3.937 ±0.02] Ø 13.50 0.531 Ø 12.80 0.504 Leader Section 400 [15.748] Min. 100 [3.937] Min. 1.50 [0.059] Min. 24.7 [0.972] Max.† Goods Enclosure Section 24.4 [0.96]† +2 [0.079] -0 [0] Trailer Section 160 [6.299] Min. All dimensions in mm (inches) * Includes flange distortion at outer edge † Measured at hub Ø20.20 [Ø0.795] Min. TAPE OUTLINE DIMENSIONS 11.5 (0.453) 24 (0.945) Ø1.5 (0.059) 16 (0.63) 2 (0.079) User direction of unreeling 0.4 (0.016) 686MC 4 (0.157) 686MC 1.75 (0.069) 8.05 (0.315) 7.8 (0.307) Reel quantity: 500 All dimensions in mm (inches) Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2011 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_2200RMC_A02 Page 3 of 3