1700 Series www.murata-ps.com Radial Lead Inductors SELECTION GUIDE Order Code FEATURES RoHS compliant Radial format Up to 1.8A IDC 10μH to 68mH Low DC resistance Miniature size PCB mounting MIL-I-23053/5 class III sleeving Fully tinned leads Supplied in packs of 20 Compatible with RoHS soldering systems Backward compatible with Sn/Pb soldering systems Custom parts available DESCRIPTION Inductance, (1kHz, 0.1VAC) DC Current1 DC Resistance ±10% μH Max. A Max. Ω Q 0.05 0.06 0.08 0.13 0.20 0.26 0.35 0.49 0.75 1.10 1.50 2.40 3.30 5.90 7.80 10.0 13.6 20.0 34.0 47.0 75.0 108.0 154.0 220.0 65 60 50 50 50 90 90 90 100 100 110 120 120 130 90 140 150 145 155 140 100 95 90 70 17103C 17153C 17223C 17333C 17473C 17683C 17104C 17154C 17224C 17334C 17474C 17684C 17105C 17155C 17225C 17335C 17475C 17685C 17106C 17156C 17226C 17336C 17476C 17686C 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1.0mH 1.5mH 2.2mH 3.3mH 4.7mH 6.8mH 10.0mH 15.0mH 22.0mH 33.0mH 47.0mH 68.0mH 1.80 1.50 1.20 1.00 0.86 0.85 0.74 0.58 0.48 0.42 0.34 0.28 0.19 0.15 0.12 0.11 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 Q at f kHz SRF Nom. f Nom. MHz 1000 500 500 500 500 100 100 100 100 100 100 100 100 100 50 150 150 150 150 150 50 50 50 50 21.2 19.4 17.0 11.4 10.9 8.7 7.0 5.7 4.4 3.7 3.2 2.5 2.1 1.9 1.7 1.2 0.95 0.85 0.62 0.51 0.34 0.28 0.25 0.20 TYPICAL CORE/WIRE CHARACTERISTICS The 1700 Series is a general purpose range of inductors suitable for low to medium current applications. Their small footprint makes them ideal for high density applications where a chip inductor will not cope with the power requirement. Inductance Temperature Coefficient Resistance Temperature Coefficient Curie Temperature (TC) Saturation Flux (BSAT) 350ppm 3900ppm 190°C 325mT ABSOLUTE MAXIMUM RATINGS Operating free air temperature range 0°C to 70°C Storage temperature range -40°C to 125°C SOLDERING INFORMATION2 Peak wave solder temperature 300˚C for 10 seconds Pin finish Hot dipped tin All specifications typical at TA=25°C 1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C, whichever is sooner. 2 For further information, please visit www.murata-ps.com/rohs For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP_1700C_C02 Page 1 of 2 1700 Series Radial Lead Inductors PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS 0.283±0.020 (7.2±0.50) Ø0.047 +0.006 +0.15 Ø1.20 -0.000 -0.00 103C All dimensions in inches (mm) 1.772±0.130 (45.00±3.30) 1.614±0.130 (41.00±3.30) 0.335±0.020 (8.5±0.50) 0.413 (10.50) Max. 0.118(3.00) 0.024±0.002 (0.60±0.05) All dimensions in inches (mm). Package weight 1.3g Typ. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2011 Murata Power Solutions, Inc. www.murata-ps.com/support KMP_1700C_C02 Page 2 of 2