Thermoelectric Power Generating Solutions Performance Parameters 1MC06-024-xxTEG TEG PERFORMANCE AT SPECIFIED HOT SIDE TEMPERATURE Optimum Power Output Pout, W 85ºC 55ºC 35ºC 1MC06-024-03TEG 0.18 0.04 1MC06-024-05TEG Optimum Voltage Uout, V 85ºC 35ºC 55ºC 35ºC 0.004 0.49 0.46 0.43 1.4 0.11 0.027 0.002 0.79 0.74 0.70 1.6 1MC06-024-08TEG 0.07 0.02 0.001 1.25 1.16 1.10 1.9 1MC06-024-10TEG 0.06 0.01 0.001 1.55 1.45 1.37 2.1 1MC06-024-12TEG 0.05 0.01 0.001 1.86 1.73 1.64 2.3 0.17 0.05 85ºC 0.61 55ºC 0.29 35ºC H mm Resistance ACR, Ohm 85ºC 0.35 55ºC Open Circuit Voltage Uoc, V 0.08 Performance values are specified for TEG cold side at +27ºC, Dry Air. Optimum Power and Voltage are given at Optimum Load Resistance Dimensions Dimensions are in mm Manufacturing options A. TEG Assembly: 1. Solder Sn-Sb, Tmelt=230°C (default assembly solder) 2. Solder Au-Sn, Tmelt=280°C (optional solution, by request) ! B. TEG Ceramics: 1. Al2O3(100%) - default 2. AlN - by request ! ! ! ! C. Ceramics Surface Options: 1. Blank ceramics - default 2. Metallized (Au plating) 3. Metallized and pre-tinned with: 3.1. In-Sn, Tmelt =117°C 3.2. Sn-Bi, Tmelt = 138°C 3.3. In-Ag, Tmelt = 143°C 3.4. In, Tmelt = 157°C 3.5. Pb-Sn, Tmelt =183°C 3.6. Optional type (can be specified by Customer) !! ! D. Thermistors (optional) Can be mounted to ceramics edge. Calibration is available by request. ! E. Terminal contacts 1. Blank, tinned Copper - default 2. Insulated Wires 3. Insulated, color coded 4. WB pads or Posts (optional) 5. Flip-Chip (optional) 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #1 of 12 # Thermoelectric Power Generating Solutions Performance Data 1MC06-024-03TEG 0.20 0.40 0.35 Tcold=27ºC 0.30 0.13 0.25 0.10 0.20 0.07 0.15 Power Voltage 0.03 27 32 37 42 47 52 57 62 67 72 77 Voltage, V Optimum Power, W 0.17 0.10 0.05 82 87 Hot Side Temperature, ºC 0.07 0.30 0.25 Tcold=50ºC 0.05 0.20 0.04 0.15 0.02 0.10 Power Voltage 0.01 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 Voltage, V Optimum Power, W 0.06 0.05 84 86 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.60 0.50 0.40 0.30 0.20 Efficiency Voltage 0.10 0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40 Performance data at Optimum Load Resistance (Rload) Ratio Rload/Rteg Values at Hot Side Temperature Parameter Units 85°C 55°C Cold Side Temperature, Tcold °C 27 27 27 Optimum Efficiency, Opt η % 2.70 1.35 0.40 35°C Optimum Power, Popt W 0.184 0.044 0.004 Optimum Voltage, Uopt V 0.348 0.165 0.046 AC Resistance, Rteg Ohm 0.49 0.46 0.43 Optimum Load Resistance, Rload Ohm 0.66 0.61 0.58 Open Circuit Voltage,Uoc V 0.61 0.29 0.08 Short Circuit Current, Isc A 1.24 0.63 0.19 Thermal Resistance, Rt °C/W 8.53 8.54 8.53 Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #2 of 12 # Voltage, V η / Opt η Hot Side Temperature, K Thermoelectric Power Generating Solutions Performance Data 1MC06-024-05TEG 0.40 0.35 0.10 Tcold=27ºC 0.30 0.08 0.25 0.06 0.20 0.04 0.15 Power Voltage 0.02 27 32 37 42 47 52 57 62 67 72 77 Voltage, V Optimum Power, W 0.12 0.10 0.05 82 87 Hot Side Temperature, ºC 0.30 0.04 0.25 Tcold=50ºC 0.03 0.20 0.03 0.15 Power Voltage 0.02 0.10 0.01 Voltage, V Optimum Power, W 0.05 0.05 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.60 0.50 0.40 0.30 0.20 Efficiency Voltage 0.10 0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40 Performance data at Optimum Load Resistance (Rload) Ratio Rload/Rteg Values at Hot Side Temperature Parameter Units 85°C 55°C Cold Side Temperature, Tcold °C 27 27 27 Optimum Efficiency, Opt η % 2.70 1.36 0.40 35°C Optimum Power, Popt W 0.113 0.027 0.002 Optimum Voltage, Uopt V 0.349 0.165 0.047 AC Resistance, Rteg Ohm 0.79 0.74 0.70 Optimum Load Resistance, Rload Ohm 1.08 1.00 0.95 Open Circuit Voltage,Uoc V 0.61 0.29 0.08 Short Circuit Current, Isc A 0.76 0.39 0.12 Thermal Resistance, Rt °C/W 13.91 13.91 13.93 Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #3 of 12 # Voltage, V η / Opt η Hot Side Temperature, K Thermoelectric Power Generating Solutions Performance Data 1MC06-024-08TEG 0.40 0.35 0.07 Tcold=27ºC 0.30 0.05 0.25 0.04 0.20 0.03 0.15 Power Voltage 0.01 27 32 37 42 47 52 57 62 67 72 77 Voltage, V Optimum Power, W 0.08 0.10 0.05 82 87 Hot Side Temperature, ºC 0.30 0.03 0.25 Tcold=50ºC 0.02 0.20 0.02 0.15 Power Voltage 0.01 0.10 0.01 Voltage, V Optimum Power, W 0.03 0.05 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.60 0.50 0.40 0.30 0.20 Efficiency Voltage 0.10 0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40 Performance data at Optimum Load Resistance (Rload) Ratio Rload/Rteg Values at Hot Side Temperature Parameter Units 85°C 55°C Cold Side Temperature, Tcold °C 27 27 27 Optimum Efficiency, Opt η % 2.69 1.36 0.40 35°C Optimum Power, Popt W 0.072 0.017 0.001 Optimum Voltage, Uopt V 0.349 0.166 0.047 AC Resistance, Rteg Ohm 1.25 1.16 1.10 Optimum Load Resistance, Rload Ohm 1.70 1.58 1.49 Open Circuit Voltage,Uoc V 0.61 0.29 0.08 Short Circuit Current, Isc A 0.48 0.25 0.07 Thermal Resistance, Rt °C/W 21.79 21.85 21.90 Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #4 of 12 # Voltage, V η / Opt η Hot Side Temperature, K Thermoelectric Power Generating Solutions Performance Data 1MC06-024-10TEG 0.40 0.35 0.06 Tcold=27ºC 0.30 0.05 0.25 0.04 0.20 0.02 0.15 Power Voltage 0.01 27 32 37 42 47 52 57 62 67 72 77 Voltage, V Optimum Power, W 0.07 0.10 0.05 82 87 Hot Side Temperature, ºC 0.30 0.03 0.25 Tcold=50ºC 0.02 0.20 0.02 0.15 0.01 0.10 Power Voltage 0.01 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 Voltage, V Optimum Power, W 0.03 0.05 84 86 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.60 0.50 0.40 0.30 0.20 Efficiency Voltage 0.10 0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40 Performance data at Optimum Load Resistance (Rload) Ratio Rload/Rteg Values at Hot Side Temperature Parameter Units 85°C 55°C Cold Side Temperature, Tcold °C 27 27 27 Optimum Efficiency, Opt η % 2.67 1.35 0.40 35°C Optimum Power, Popt W 0.058 0.014 0.001 Optimum Voltage, Uopt V 0.349 0.166 0.047 AC Resistance, Rteg Ohm 1.55 1.45 1.37 Optimum Load Resistance, Rload Ohm 2.11 1.97 1.85 Open Circuit Voltage,Uoc V 0.61 0.29 0.08 Short Circuit Current, Isc A 0.39 0.20 0.06 Thermal Resistance, Rt °C/W 26.97 27.07 27.17 Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #5 of 12 # Voltage, V η / Opt η Hot Side Temperature, K Thermoelectric Power Generating Solutions Performance Data 1MC06-024-12TEG 0.40 0.35 0.05 Tcold=27ºC 0.30 0.04 0.25 0.03 0.20 0.02 0.15 Power Voltage 0.01 27 32 37 42 47 52 57 62 67 72 77 Voltage, V Optimum Power, W 0.06 0.10 0.05 82 87 Hot Side Temperature, ºC 0.30 0.02 0.25 Tcold=50ºC 0.01 0.20 0.01 0.15 Power Voltage 0.01 0.10 0.00 Voltage, V Optimum Power, W 0.02 0.05 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.60 0.50 0.40 0.30 0.20 Efficiency Voltage 0.10 0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40 Performance data at Optimum Load Resistance (Rload) Ratio Rload/Rteg Values at Hot Side Temperature Parameter Units 85°C 55°C Cold Side Temperature, Tcold °C 27 27 27 Optimum Efficiency, Opt η % 2.66 1.34 0.40 35°C Optimum Power, Popt W 0.048 0.012 0.001 Optimum Voltage, Uopt V 0.349 0.165 0.047 AC Resistance, Rteg Ohm 1.86 1.73 1.64 Optimum Load Resistance, Rload Ohm 2.53 2.33 2.22 Open Circuit Voltage,Uoc V 0.61 0.29 0.08 Short Circuit Current, Isc A 0.33 0.17 0.05 Thermal Resistance, Rt °C/W 32.07 32.19 32.39 Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #6 of 12 # Voltage, V η / Opt η Hot Side Temperature, K Thermoelectric Power Generating Solutions Thermoelectric Generator Overview Al2O3 Ceramics by default (AlN solution is available by request) Top Ceramics Internal Assembly Solder (Lead-Free, Sn-Sb, Tmelt=230ºC) Pellets (BiTe posts) Bottom Ceramics Terminal Wires (soldered to bottom ceramics) Application Tips 1. Never heat TEG module more than 200˚C (TEG is assembled at 230˚C). 2. TEG module to be fixed between hot and cold exchangers with an optimal thermal contact for the best efficiency. Improper contact may reduce dT level and power output. 3. TEG polarity depends on applied hot and cold side orientation + Thot Tcold Tcold Thot - - + Installation 1. Mechanical Mounting. TEG is placed between two heat exchangers . This construction is fixed by screws or in another mechanical way. It is suitable for relatively large TEG modules (with dimensions 15x15mm2 and larger). Miniature TEG types may require another assembling methods. 1. Soldering. This method is suitable for a TEG module with metallized outside surfaces. RMT provides this option and also makes pre-tinning for TE generators. 2. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good thermoconductive properties. A glue is usually based on some epoxy compound filled with some thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a specific type depends on application features and the type of a TEG module. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #7 of 12 # Thermoelectric Power Generating Solutions Additional Options Terminal Wires Options The wires by default are of tinned Copper, blank (not insulated). Various options for isolated wires are available by request. The available solutions include isolated wires, isolated color-coded wires, flexible multicore wires and more. S t a n d a rd w i re s , tinned Copper Insulated wires Terminal Connection Modification TE Generator terminal contacts can be modified from standard wired solution to WB connection or Flip-Chip if required. Modified for WB Flip-Chip Optimized TEG Height Modification Standard thermoelectric generator height can be modified without performance changes by using ceramics of different thickness. Standard thermoelectric generator height (specified in this datasheet) may be modified in a range -0.5..+1.0mm. Standard height Modified height, another ceramics thickness TEG Shape Modification Standard thermoelectric generator shape can be modified without performance changes RMT has full-featured flexibility with thermoelectric generator shape and ceramics modification. Standard shape Modified shape, different solutions are available ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #8 of 12 # Thermoelectric Power Generating Solutions Thermoelectric Generator Basics Simplified TE Generator estimations Rteg TEG Resistance (ACR value) The level of power output of thermoelectric generator in conditions specified can be estimated by the following formulas. E = α x (Thot - Tcold) x N I= Resistance in connected chain Rload E (Rteg + Rload) Current I Pout = I2 x Rload Thot Ncouples Getting data from TEG type name Tcold α = 400uV/K RMT thermoelectric generators have a nomenclature system that allows to get the required data for estimations quickly. 1MC06-024-05TEG Ncouples General Rteg (ACR) values are specified in the datasheet in main table (page 1). Thermoelectric generator Rteg value depends on the ambient temperature. For the precise estimations, please, contact RMT specialists directly. ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page #9 of 12 # Thermoelectric Power Generating Solutions Thermoelectric Generator Basics Resistances and TEG Efficiency TEG Resistance (ACR value) η / Opt η Rteg Resistance in connected chain Rload Thermoelectric generator best efficiency is reached at Load Resistance (Rload) close to thermoelectric generator resistance Rteg. In most cases thermoelectric generator best efficiency is reached at Rload/Rteg ratio in a range 1.2 - 1.4 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 TEG Efficiency 0.00 Current I 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 Ratio Rload/Rteg Output voltage and DC-DC converters DC-DC converters are recommended to use with miniature thermoelectric generators, especially in low dT mode. Uin 40mV Rload DC-DC Uout 2.4V R ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 10 # of 12 # Thermoelectric Power Generating Solutions Contacts ! Russia - RMT Ltd. Headquarters Warshavskoe sh. 46, 115230, Moscow Russia Tel: +7-499-678-2082 Fax: +7-499-678-2083 Web: www.rmtltd.ru Email: [email protected] Europe/USA - TEC Microsystems GmbH Korea - Sunflower Energy Schwarzschildstrasse 8, 12489 Berlin 1F, 665-6, Pungdeokcheon-dong Germany Suji-gu, Yongin-si, Gyeonggi-do Tel: +49 30 6789 3314 South Korea Fax: +49 30 6789 3315 Tel: +82 312767992 Web: www.tec-microsystems.com Fax: +82 312767993 Email: [email protected] web: http://www.sunfl.co.kr China - ProTEC Ltd. Taiwan - Wellspring & Vim Tech Corp ! B ! 207 9F-1, No.657 Pei-an Rd. +86-755-61596066 Taipei 104 +86-755-61596036 Taiwan 518054 Tel: +886 2-85091756 Web: www.protecltd.com Fax: +886 2-85091846 Email: [email protected] web: www.wellvim.com.tw ! ! ! ! Email: [email protected] ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 11 # of 12 # Thermoelectric Power Generating Solutions ! Legal Notice ! All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection. RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd do not grant a copyright license (express or implied) to the Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release without any alteration for non-promotional or editorial purposes only with a written note about materials owner. ! Copyright protection warning ! Graphic materials and text from this datasheet may not be used commercially without a prior response in writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual property rights protected by the International Copyright laws. Warning: All datasheet images contain RMT Ltd hidden watermark for the immediate proof of their origin. RMT Ltd. RMT Image Hidden Watermark ! 46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 12 # of 12 #