datasheet

Thermoelectric Power Generating Solutions
Performance Parameters
1MC06-018-xx/2TEG
TEG PERFORMANCE AT SPECIFIED HOT SIDE TEMPERATURE
Optimum Power
Output
Pout, W
85ºC
55ºC
35ºC
1MC06-018-03/2TEG
0.14
0.03
0.003
1MC06-018-05/2TEG
0.08
0.021 0.002
1MC06-018-08/2TEG
0.05
0.01
Optimum Voltage
Uout, V
85ºC
0.26
55ºC
35ºC
0.12
0.03
Open Circuit Voltage
Uoc, V
85ºC
0.45
55ºC
0.22
35ºC
0.06
0.001
H
mm
Resistance
ACR, Ohm
85ºC
55ºC
35ºC
0.37
0.34
0.33
1.4
0.59
0.55
0.53
1.6
0.94
0.87
0.83
1.9
Performance values are specified for TEG cold side at +27ºC, Dry Air. Optimum Power and Voltage are given at Optimum Load Resistance
Dimensions
Dimensions are in mm
Manufacturing options
A. TEG Assembly: 1. Solder Sn-Sb, Tmelt=230°C
(default assembly solder)
2. Solder Au-Sn, Tmelt=280°C
(optional solution, by request)
!
B. TEG Ceramics: 1. Al2O3(100%) - default
2. AlN - by request
!
!
!
!
C. Ceramics Surface Options:
1. Blank ceramics - default
2. Metallized (Au plating)
3. Metallized and pre-tinned with:
3.1. In-Sn, Tmelt =117°C
3.2. Sn-Bi, Tmelt = 138°C
3.3. In-Ag, Tmelt = 143°C
3.4. In, Tmelt = 157°C
3.5. Pb-Sn, Tmelt =183°C
3.6. Optional type (can be
specified by Customer)
!!
!
D. Thermistors (optional)
Can be mounted to ceramics
edge. Calibration is available
by request.
!
E. Terminal contacts
1. Blank, tinned Copper - default
2. Insulated Wires
3. Insulated, color coded
4. WB pads or Posts (optional)
5. Flip-Chip (optional)
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #1 of 10
#
Thermoelectric Power Generating Solutions
Performance Data
1MC06-018-03/2TEG
0.16
0.30
0.26
Tcold=27ºC
0.23
0.11
0.19
0.08
0.15
0.05
0.11
Power
Voltage
0.03
27
32
37
42
47
52
57
62
67
72
77
Voltage, V
Optimum Power, W
0.13
0.08
0.04
82
87
Hot Side Temperature, ºC
0.06
0.18
0.15
Tcold=50ºC
0.04
0.12
0.03
0.09
0.02
0.06
Power
Voltage
0.01
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
Voltage, V
Optimum Power, W
0.05
0.03
84
86
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.50
0.42
0.33
0.25
0.17
Efficiency
Voltage
0.08
0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40
Performance data at Optimum
Load Resistance (Rload)
Ratio Rload/Rteg
Values at Hot Side Temperature
Parameter
Units
85°C
55°C
Cold Side Temperature, Tcold
°C
27
27
27
Optimum Efficiency, Opt η
%
2.69
1.35
0.39
35°C
Optimum Power, Popt
W
0.138
0.033
0.003
Optimum Voltage, Uopt
V
0.261
0.124
0.035
AC Resistance, Rteg
Ohm
0.37
0.34
0.33
Optimum Load Resistance, Rload
Ohm
0.49
0.46
0.44
Open Circuit Voltage,Uoc
V
0.45
0.22
0.06
Short Circuit Current, Isc
A
1.24
0.63
0.19
Thermal Resistance, Rt
°C/W
11.33
11.33
11.33
Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side
temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #2 of 10
#
Voltage, V
η / Opt η
Hot Side Temperature, K
Thermoelectric Power Generating Solutions
Performance Data
1MC06-018-05/2TEG
0.30
0.26
0.08
Tcold=27ºC
0.23
0.06
0.19
0.05
0.15
0.03
0.11
Power
Voltage
0.02
27
32
37
42
47
52
57
62
67
72
77
Voltage, V
Optimum Power, W
0.09
0.08
0.04
82
87
Hot Side Temperature, ºC
0.18
0.03
0.15
Tcold=50ºC
0.03
0.12
0.02
0.09
Power
Voltage
0.01
0.06
0.01
Voltage, V
Optimum Power, W
0.04
0.03
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.50
0.42
0.33
0.25
0.17
Efficiency
Voltage
0.08
0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40
Performance data at Optimum
Load Resistance (Rload)
Ratio Rload/Rteg
Values at Hot Side Temperature
Parameter
Units
85°C
55°C
Cold Side Temperature, Tcold
°C
27
27
27
Optimum Efficiency, Opt η
%
2.69
1.36
0.40
35°C
Optimum Power, Popt
W
0.085
0.021
0.002
Optimum Voltage, Uopt
V
0.262
0.124
0.035
AC Resistance, Rteg
Ohm
0.59
0.55
0.53
Optimum Load Resistance, Rload
Ohm
0.81
0.75
0.71
Open Circuit Voltage,Uoc
V
0.45
0.22
0.06
Short Circuit Current, Isc
A
0.76
0.39
0.12
Thermal Resistance, Rt
°C/W
18.46
18.47
18.50
Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side
temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #3 of 10
#
Voltage, V
η / Opt η
Hot Side Temperature, K
Thermoelectric Power Generating Solutions
Performance Data
1MC06-018-08/2TEG
0.30
0.26
0.05
Tcold=27ºC
0.23
0.04
0.19
0.03
0.15
0.02
0.11
Power
Voltage
0.01
27
32
37
42
47
52
57
62
67
72
77
Voltage, V
Optimum Power, W
0.06
0.08
0.04
82
87
Hot Side Temperature, ºC
0.18
0.02
0.15
Tcold=50ºC
0.01
0.12
0.01
0.09
Power
Voltage
0.01
0.06
0.00
Voltage, V
Optimum Power, W
0.02
0.03
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.50
0.42
0.33
0.25
0.17
Efficiency
Voltage
0.08
0.00 0.60 1.20 1.60 2.20 2.80 3.40 4.00 4.60 5.20 5.80 6.40 7.00 7.60 8.20 8.80 9.40
Performance data at Optimum
Load Resistance (Rload)
Ratio Rload/Rteg
Values at Hot Side Temperature
Parameter
Units
85°C
55°C
Cold Side Temperature, Tcold
°C
27
27
27
Optimum Efficiency, Opt η
%
2.67
1.35
0.40
35°C
Optimum Power, Popt
W
0.054
0.013
0.001
Optimum Voltage, Uopt
V
0.262
0.124
0.035
AC Resistance, Rteg
Ohm
0.94
0.87
0.83
Optimum Load Resistance, Rload
Ohm
1.28
1.18
1.12
Open Circuit Voltage,Uoc
V
0.45
0.22
0.06
Short Circuit Current, Isc
A
0.48
0.25
0.07
Thermal Resistance, Rt
°C/W
28.90
28.97
29.09
Note: Power Generation performance charts are specified in Optimum conditions, dry air, with cold side
temperature set at +27ºC and 50ºC. Heatsink thermal resistance is not included into estimations.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #4 of 10
#
Voltage, V
η / Opt η
Hot Side Temperature, K
Thermoelectric Power Generating Solutions
Thermoelectric Generator Overview
Al2O3 Ceramics by default
(AlN solution is available by
request)
Top Ceramics
Internal Assembly Solder
(Lead-Free, Sn-Sb,
Tmelt=230ºC)
Pellets (BiTe posts)
Terminal Contacts
(WB pads)
Bottom Ceramics
Application Tips
1. Never heat TEG module more than 200˚C (TEG is
assembled at 230˚C).
2. TEG module to be fixed between hot and cold
exchangers with an optimal thermal contact for the
best efficiency. Improper contact may reduce dT
level and power output.
3. TEG polarity depends on applied hot and cold side
orientation
+
Thot
Tcold
Tcold
Thot
-
-
+
Installation
1. Mechanical Mounting. TEG is placed between two heat exchangers . This construction is fixed by screws or in
another mechanical way. It is suitable for relatively large TEG modules (with dimensions 15x15mm2 and larger).
Miniature TEG types may require another assembling methods.
1. Soldering. This method is suitable for a TEG module with metallized outside surfaces. RMT provides this option
and also makes pre-tinning for TE generators.
2. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good
thermoconductive properties. A glue is usually based on some epoxy compound filled with some
thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a
specific type depends on application features and the type of a TEG module.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #5 of 10
#
Thermoelectric Power Generating Solutions
Additional Options
Terminal Contacts Options
The wires by default are of tinned Copper, blank
(not insulated). Various options for isolated wires
are available by request. The available solutions
include isolated wires, isolated color-coded wires,
flexible multicore wires and more.
Standard WB
Solution
Terminal Wires
Terminal Contacts Modification
TE Generator terminal contacts can be modified
from standard WB pads solution to WB posts type
or Flip-Chip if required.
WB Solution
Flip-Chip Optimized
TEG Height Modification
Standard thermoelectric generator height can be
modified without performance changes by using
ceramics of different thickness. Standard
thermoelectric generator height (specified in this
datasheet) may be modified in a range
-0.5..+1.0mm.
Standard height
Modified height,
another ceramics
thickness
TEG Shape Modification
Standard thermoelectric generator shape can be
modified without performance changes RMT has
full-featured flexibility with thermoelectric generator
shape and ceramics modification.
Standard shape
Modified shape,
different solutions
are available
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #6 of 10
#
Thermoelectric Power Generating Solutions
Thermoelectric Generator Basics
Simplified TE Generator estimations
Rteg
TEG Resistance
(ACR value)
The level of power output of thermoelectric generator in
conditions specified can be estimated by the following
formulas.
E = α x (Thot - Tcold) x N
I=
Resistance in
connected chain
Rload
E
(Rteg + Rload)
Current I
Pout = I2 x Rload
Thot
Ncouples
Getting data from TEG type name
Tcold
α = 400uV/K
RMT thermoelectric generators have a nomenclature
system that allows to get the required data for
estimations quickly.
1MC06-018-05/2TEG
Ncouples
General Rteg (ACR) values are specified in the datasheet
in main table (page 1). Thermoelectric generator Rteg
value depends on the ambient temperature.
For the precise estimations, please, contact RMT
specialists directly.
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #7 of 10
#
Thermoelectric Power Generating Solutions
Thermoelectric Generator Basics
Resistances and TEG Efficiency
TEG Resistance
(ACR value)
η / Opt η
Rteg
Resistance in
connected chain
Rload
Thermoelectric generator best efficiency is reached at
Load Resistance (Rload) close to thermoelectric
generator resistance Rteg.
In most cases thermoelectric generator best efficiency is
reached at Rload/Rteg ratio in a range 1.2 - 1.4
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
TEG Efficiency
0.00
Current I
0.60
1.20
1.60
2.20
2.80
3.40
4.00
4.60
Ratio Rload/Rteg
Output voltage and DC-DC converters
DC-DC converters are recommended to use with
miniature thermoelectric generators, especially in low dT
mode.
Uin
40mV
Rload
DC-DC
Uout
2.4V
R
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #8 of 10
#
Thermoelectric Power Generating Solutions
Contacts
!
Russia - RMT Ltd. Headquarters
Warshavskoe sh. 46, 115230, Moscow
Russia
Tel: +7-499-678-2082
Fax: +7-499-678-2083
Web: www.rmtltd.ru
Email: [email protected]
Europe/USA - TEC Microsystems GmbH
Korea - Sunflower Energy
Schwarzschildstrasse 8, 12489 Berlin
1F, 665-6, Pungdeokcheon-dong
Germany
Suji-gu, Yongin-si, Gyeonggi-do
Tel: +49 30 6789 3314
South Korea
Fax: +49 30 6789 3315
Tel: +82 312767992
Web: www.tec-microsystems.com
Fax: +82 312767993
Email: [email protected]
web: http://www.sunfl.co.kr
China - ProTEC Ltd.
Taiwan - Wellspring & Vim Tech Corp
!
B
!
207
9F-1, No.657 Pei-an Rd.
+86-755-61596066
Taipei 104
+86-755-61596036
Taiwan
518054
Tel: +886 2-85091756
Web: www.protecltd.com
Fax: +886 2-85091846
Email: [email protected]
web: www.wellvim.com.tw
!
!
!
!
Email: [email protected]
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page #9 of 10
#
Thermoelectric Power Generating Solutions
!
Legal Notice
!
All logos, images, trademarks and product names (collectively Materials) are proprietary to RMT Ltd and/ or any
of its affiliates, or subsidiaries, or other respective owners that have granted RMT Ltd the permission and/or
license to use such Materials. All images are provided by RMT Ltd. and are subjects of copyright protection.
RMT Ltd, TEC Microsystems GmbH and ProTEC Ltd do not grant a copyright license (express or implied) to the
Recipient, except that Recipient may reproduce the logos, images and text materials in this press-release
without any alteration for non-promotional or editorial purposes only with a written note about materials owner.
!
Copyright protection warning
!
Graphic materials and text from this datasheet may not be used commercially without a prior response in
writing on company letterhead and signed by RMT Ltd authority. Thank you for respecting the intellectual
property rights protected by the International Copyright laws.
Warning: All datasheet images contain RMT Ltd hidden watermark for the immediate proof of their origin.
RMT Ltd.
RMT Image
Hidden Watermark
!
46 Warshavskoe shosse. Moscow 115230 Russia, ph: +7-499-678-2082, fax: +7-499-678-2083, web: www.rmtltd.ru
Copyright 2014. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice.
Page 10
# of 10
#