1N4001 THRU 1N4007 General Purpose Plastic Silicon Rectifier Reverse Voltage - 50 to 1000 V Forward Current - 1 A Features • Low forward voltage drop • High current capability • High surge current capability .205(5.2) .161(4.1) Mechanical Data • Case: Molded plastic, DO-41 • Epoxy: UL 94V-0 rate flame retardant • Lead: Axial leads, solderable per MIL-STD-202 method 208 guaranteed • Polarity: Color band denotes cathode end • Mounting position: Any E T M E Absolute Maximum Ratings and Characteristics H C Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols Parameter 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 Maximum RMS Voltage VRMS 35 70 140 Maximum DC Blocking Voltage VDC 50 100 200 Maximum Average Forward Rectified Current 0.375" (9.5 mm) Lead Length at TA = 75℃ I(AV) 1 A Peak Forward Surge Current, 8.3 ms Single Halfsine-wave Superimposed on rated load (JEDEC method) IFSM 30 A Maximum Forward Voltage at 1 A DC and 25℃ VF 1.1 V Maximum Reverse Current at Rated DC Blocking Voltage IR 5 50 µA Typical Thermal Resistance, Junction to Ambient RθJA 55 O Typical Thermal Resistance, Junction to Lead RθJL 25 O Operating Junction Temperature Range TJ - 55 to + 125 ℃ Storage Temperature Range Tstg - 55 to + 150 ℃ S TA = 25℃ TA = 125℃ 600 800 1000 V 280 420 560 700 V 400 600 800 1000 V C/W C/W SEMTECH ELECTRONICS LTD. ® Dated: 24/10/2014 YJ Rev: 02 1N4001 THRU 1N4007 E T M E H C S SEMTECH ELECTRONICS LTD. ® Dated: 24/10/2014 YJ Rev: 02