1N4001S THRU 1N4007S PLASTIC SILICON RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere A-405 FEATURES l Low forward voltage drop l High current capability l High reliability l High surge current capability l l 0.6mm leads Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic , A-405 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=75 Peak Forward Surge Current 8.3ms single half sine-wave IFSM superimposed on rated load Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current @TA=25 At Rated DC Blocking Voltage @TA=100 Typical Junction capacitance (Note 1) Typical Thermal Resistance (Note 2) R JA Typical Thermal resistance (NOTE 2) R JL Operating Temperature Range TJ Storage Temperature Range TA 50 35 50 100 75 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 UNITS V V V A 30 A 1.1 5.0 500 15 50 25 -55 to +150 -55 to +150 V A A F P /W /W NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted RATING AND CHARACTERISTIC CURVES 1N4001S THRU 1N4007S Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICAL REVERSE CHARACTERISTICS