LARGE ALUMINUM ELECTROLYTIC CAPACITORS For Inverter Circuits Series GF Long Life Screw terminal series in compact case sizes High reliability, long life guaranteed for 5000 hours load life at 85 C 500 ~ 600WV is assured 2000 hours at 85 C) Suited for use in industrial power supplies for inverters Complied to the RoHS directive Item Characteristics -25 ~ +85 C 20% at 120Hz, 20 C I=3 CV ( A) (after 5 minutes) 0.25 max. at 120Hz, 20 C Operating temperature range Capacitance tolerance Leakage current max. Dissipation factor max. Less than specified value Leakage current Within 20% of initial value Capacitance change Less than 300% of specified value tan 500~600WV products are for 2000 hours. Load life (after application of the rated voltage for 5000 hours at 85 C) Shelf life After 1000 hours no load test, leakage current, capacitance and tan are same as load life value. The measurement shall be performed at 20 C by the KS C IEC 60384 - 4 (at 85 C) Unit : mm DRAWING Bottom plate D 2 max. Insulating sleeve P 1 Safety vent M5 Hexagon head bolt L 3 max. 6.0 1 TWO LEGS ANGLE THREE LEGS ANGLE 120 U 3.5 T 4.5 B B A 1 A 1 D B A T U U LARGE TYPES TWO LEGS ANGLE SIZE TABLE T THREE LEGS ANGLE SIZE TABLE P D B A T U P 51 33.6 39.9 6 14 30 22 51 32.9 38.9 7 12 60 22 63.5 40.8 46.8 6 14 30 28.6 63.5 38.4 45.3 7 14 60 28.6 76.2 44.5 51.5 8 16 60 31.8 89 50.8 61 8 16 60 31.8 221 LARGE ALUMINUM ELECTROLYTIC CAPACITORS GF series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV 350 Item 400 Ripple current D 450 Ripple current L D L (A rms) (mm) 40 C 120Hz L (A rms) (mm) F Ripple current D (A rms) 85 C 120Hz (mm) 40 C 120Hz 85 C 120Hz 40 C 120Hz 85 C 120Hz 2200 51 110 16.0 6.0 51 130 17.1 6.4 63.5 110 17.0 6.4 2700 51 130 18.9 7.1 63.5 110 18.9 7.1 63.5 130 20.0 7.5 3300 63.5 100 20.5 7.5 63.5 130 22.2 8.3 76.2 110 21.4 8.0 3900 63.5 100 23.2 8.2 76.2 100 24.2 8.4 76.2 130 24.7 8.3 4700 76.2 100 26.9 9.5 76.2 130 27.1 10.2 76.2 150 28.7 10.8 5600 76.2 110 28.9 10.5 76.2 150 31.3 11.8 76.2 160 32.5 12.1 6800 76.2 130 33.7 12.3 76.2 160 35.8 13.4 89 150 37.9 14.3 89 160 42.6 16.1 8200 76.2 160 38.3 14.7 89 150 41.6 15.7 10000 89 150 45.9 17.3 89 160 46.4 17.8 12000 89 160 51.7 19.5 WV 500 Item 550 Ripple current D 600 Ripple current L D L Ripple current D (A rms) L (A rms) (mm) (A rms) (mm) (mm) 40 C 120Hz 85 C 120Hz 40 C 120Hz 85 C 120Hz 1000 51 120 12.2 4.2 51 130 12.2 4.2 63.5 130 17.1 5.9 1200 63.5 100 13.1 4.5 63.5 110 14.5 5.0 76.2 120 19.4 6.7 1500 63.5 100 14.8 5.1 63.5 130 17.4 6.0 76.2 140 23.4 8.1 1800 63.5 120 17.4 6.0 76.2 110 19.4 6.7 76.2 160 27.8 9.6 2200 63.5 140 20.3 7.0 76.2 130 23.2 8.0 76.2 160 31.0 10.7 2700 76.2 120 22.3 7.5 76.2 150 27.2 9.4 89 160 36.5 12.6 3300 76.2 140 26.1 8.8 76.2 160 31.9 11.0 89 160 36.2 12.5 F 40 C 120Hz 3900 85 C 120Hz FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT 222 Frequency 50Hz 120Hz 300Hz 1kHz 3kHz Coefficient 0.8 1.0 1.1 1.3 1.4