PRODUCT SPECIFICATION DATE:05/18/2004 cosmo Photolink : ELECTRONICS CORPORATION NO.60F01002 REV. KPLR1320B SHEET 1 OF 5 FIBER OPTIC Receiver Module Features ● TTL interface compatible. ● 13.2Mbps data rate(NRZ Signal). ● Directly connectable to demodulation IC. ● Supply voltage 3.3V/ 5V equipment. Applications ● Audio equipment . ● Sound card. ● DVD,CD,MD player . ● Set top box. ● Automobile. ● PC,Notebook. Outline Dimensions (Unit:mm) Tolerance:±0.2mm Pin Connection 1.Vout 2.GND 3.Vcc 1 PRODUCT SPECIFICATION DATE:05/18/2004 cosmo Photolink : ELECTRONICS CORPORATION NO.60F01002 REV. KPLR1320B SHEET 2 OF 5 1 1. Maximum Ratings(Ta=25℃,Vcc=3.3V/5V) Parameter Symbol Rating Unit ℃ Storage Temperature Tstg -40~80 ℃ Operating Temperature Topr -20~70 Supply Voltage Vcc -0.5~7 V Input Voltage VIN -0.5~Vcc+0.5 V ℃ 260(Note 1) Soldering Temperature Tsol Note 1:Soldering time ≦ 10 seconds(At a distance of 1 mm from the package). 2. Recommended Operating Conditions(Ta=25℃,Vcc=3.3V/5V) Parameter Supply Voltage Operating transfer rate Input optical power level Symbol Min Typ. Max Unit VCC T PI 2.7 0.1 -24 3.3 - 5.5 13.2 -14.5 V Mbps dBm 3. Electrical and Optical Characteristics :Receiver(Ta=25℃,Vcc=3.3V/5V) Parameter Symbol Condition (Note Min 2) Typ. Max Unit NRZ Signal Operating transfer rate T 0.1 13.2 Mb/s Operating voltage Vcc 2.7 3.3 5.5 V Optical Input Sensitivity(Note 3) -24 - -14.5 dBm PI Peak Emission Wavelength λp 700 nm Refer to Fig.(1) Dissipation Current Icc 8 15 mA Refer to Fig.(2) 2.4 V High Level Output Voltage VOH Refer to Fig.(2) Low Level Output Voltage VOL 0.4 V Refer to Fig.(2) Rise time tr 10 15 ns Refer to Fig.(2) 10 15 ns Fall time tf Low->High Propagation delay Refer to Fig.(2) 180 ns tPLH time High -> Low Propagation delay Refer to Fig.(2) tPHL 180 ns time Refer to Fig.(2) △tw Pulse Width Distortion -20 20 ns Refer to Fig.(3) △ tj Jitter Time 15 ns Note 2:LED is ON when input signal is high, and OFF when it is low. The duty factor must be maintained between 25 to 75%. Note 3:Measure with a standard optical fiber, peak value. PRODUCT SPECIFICATION DATE:05/18/2004 cosmo Photolink : ELECTRONICS CORPORATION NO.60F01002 REV. KPLR1320B SHEET 3 OF 5 4. Measuring method (1).Measuring Supply Current Supply Voltage Fiber coupling light output Standard transmitter input signal Input test Conditions Vcc=5.0V Pc=-14.5dBm 13.2Mbps NRZ Measuring method DC Average current (2).Measuring method of Output Voltage and Pulse response △tw= tPHL- tPLH 1 PRODUCT SPECIFICATION DATE:05/18/2004 cosmo ELECTRONICS CORPORATION Photolink : NO.60F01002 REV. KPLR1320B SHEET 4 OF 5 (3).Measuring method of Jitter 5.Recommended PCB Layout Notes: 1.Unit:mm 2.tolerance:±0.3mm 1 PRODUCT SPECIFICATION DATE:05/18/2004 cosmo Photolink : ELECTRONICS CORPORATION KPLR1320B NO.60F01002 REV. SHEET 5 OF 5 1 6.Package Information Item Tube Inner Box Outer Box Quantity 50 20 Tube/Box 4 Inner Box/Outer Box 50pcs/Tube 4000pcs/Outer Box Total 50 pcs 1000 pcs 4000 pcs Size(Long*Width*High) 640*27.2*25.2 mm 660*156*122 mm 690*342*284 mm 1000pcs/Inner Box