KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z z Schematic Description 3 package. It features a high current transfer ratio, low 2 and is incorporated in a 4 pin LSOP wide body 4 diode, optically coupled to a phototransistor detector, 1 The KT1000 series consist of an infrared emitting coupling capacitance and high isolation voltage. 1. Anode 2. Cathode 3. Emitter 4. Collector z Features 1. Halogen free 2. Pb free and RoHS compliant 3. High isolation voltage 5000Vrms 4. Opaque type, SMD low profile 4 lead package 5. Current transfer ratio (CTR : Min.50% at IF=5mA VCE=5V) 6. 8mm outer creepage distance 7. DC input with transistor output 8. Agency Approvals: • UL1577 / CUL C22.2 No.1 & NTC No.5, File No. E169586 • VDE EN 60747, File No.40031267 • FMIKO EN 60065 , EN 60950, File No.FI26204 M1 • CQC GB4943 / GB8898-2011, File No. CQC11001057770,CQC11001057771 • CQC GB4943 / GB8898-2011, File No. CQC11001057773,CQC11001057775 z Applications • Hybrid substrates that require high density mounting. • Programmable controllers. • Switch mode power supplies. • Microprocessor system interface. Cosmo Electronics Corp. Document No. 69P00006.1 -1- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Outside Dimension Unit : mm TOLERANCE : ±0.2mm z Device Marking Notes: cosmo cosmo 100□ YWW 100 □:CTR rank Y: Year code / WW: Week code YWW Cosmo Electronics Corp. Document No. 69P00006.1 -2- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Forward current IF 50 mA Peak forward current IFP 1 A Reverse voltage VR 6 V Power dissipation PD 100 mW Collector-Emitter voltage VCEO 80 V Emitter-Collector voltage VECO 7 V Collector current IC 50 mA Collector power dissipation PC 150 mW Total power dissipation Ptot 250 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -55 to +100 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 second Tsol 260 ℃ Input Output z Electro-optical Characteristics Input (Ta=25℃) Parameter Symbol Forward voltage VF Reverse current Min. Typ. Max. Unit IF=20mA – 1.2 1.4 V IR VR=4V – – 10 uA Terminal capacitance Ct V=0, f=1KHZ – 30 250 pF Collector dark current ICEO VCE=20V, IF=0 – – 0.1 uA BVCEO Ic=0.1mA, IF=0 80 - - V BVECO IE=100uA, IF=0 7 - - V IF=5mA, VCE=5V 50 – 600 % IF=1mA, VCE=5V 15 – 0.1 0.3 V 5x1010 1011 – Ω – 0.6 1.0 pF – 5 – us – 4 – us Collector-Emitter breakdown Output voltage Emitter-Collector breakdown voltage Current transfer ratio Collector-emitter saturation Transfer voltage characteristics Isolation resistance CTR VCE(sat) IF=10mA, Ic=1mA Riso Floating capacitance Cf Response time (Rise) tr Response time (Fall) tf Cosmo Electronics Corp. Document No. 69P00006.1 Conditions DC500V, 40 to 60%RH V=0, f=1MHZ Vcc=2V,Ic=2mA,RL=100Ω -3- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.1 Current Transfer Ratio vs. Forward Current Current Transfer Ratio CTR ( % ) CTR Rank KT1005 KT1006 KT1007 KT1008 KT1009 KT1000 CTR ( % ) 50 TO 150 100 TO 300 80 TO 160 130 TO 260 200 TO 400 50 TO 600 VCE =5V Ta=25℃ 0 5 0 2 0 1 5 2 1 5 . 0 0 0 0 0 0 0 0 0 0 0 00 0 5 0 5 0 5 0 5 0 5 5 4 4 3 3 2 2 1 1 Classification table of current transfer ratio is shown below. Forward Current IF (mA) Fig.2 Collector Power Dissipation vs. Ambient Temperature Fig.3 Collector Dark Current vs. Ambient Temperature Collector Dark Current ICEO ( A ) Collector Power Dissipation PC ( mW ) 100 50 0 25 55 75 100 E C 150 -6 10 -7 10 -8 10 -9 10 -1 0 10 -1 1 125 10 -5 5 Ambient Temperature Ta (℃) 25 50 75 100 115 Fig.5 Forward Current vs. Forward Voltage 500 Forward Current IF ( mA ) 60 Forward Current IF ( mA ) 0 -2 5 Ambient Temperature Ta (℃) Fig.4 Forward Current vs. Ambient Temperature 50 40 30 20 10 0 -55 V 0 2 = 10 200 0 -55 V -5 250 0 25 50 75 100 25℃ Ta=75℃ 50℃ 100 50 0℃ -25℃ 20 10 5 2 1 0 125 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage VF (V) Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P00006.1 200 -4- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo Fig.6 Collector Current vs. Collector-Emitter Voltage Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature 150 Relative Current Transfer Ratio ( % ) Collector Current IC (mA) Ta=25℃ 50 I F =30m A I F =20m A 40 I F =10m A 30 P C (M A X ) 20 I F =5m A 10 0 5 I F =5m A Vce=5V 100 50 0 -55 10 Collector-Emitter Voltage VCE (V) Collector-Emitter Saturation Voltage VCE ( V ) Collector-Emitter Saturation Voltage VCE ( V ) 0 .1 2 0 .1 0 0 .0 8 0 .0 6 0 .0 4 0 .0 2 50 75 Ic=0.5m A 5 Ic=1m A 4 Ic=3m A 3 Ic=7m A 1 Fig.11 Response Time (Fall) vs. Load Resistance 100 tr 20 10 5 2 1 0 .5 0 .2 0 .1 0 .1 1 50 VC E = 2 V Ic = 2 m A T a = 2 5 °C tf 20 10 5 2 1 0 .5 0 .2 0 .1 10 0 .1 Load Resistance RL (KΩ) Cosmo Electronics Corp. Document No. 69P00006.1 10 5 0 Forward Current IF (mA) Response Fall Time ( us ) Response Rise Time ( us ) 50 Ic=5m A 2 100 Fig.10 Response Time (Rise) vs. Load Resistance VC E = 2 V Ic = 2 m A Ta=25°C 100 Ta=25° C Ambient Temperature Ta (℃) 100 75 6 0 0 25 50 7 IF = 1 0 m A Ic= 1 m A 0 25 Fig.9 Collector-Emitter Saturation Voltage vs. Forward Current 0 .1 6 -5 5 0 Ambient Temperature Ta (℃) Fig.8 Collector-Emitter Saturation Voltage vs. Ambient Temperature 0 .1 4 -25 1 10 Load Resistance RL (KΩ) -5- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Test Circuit for Response Time c c V F I % 0 9 e c V 3 e c V 4 2 L R 1 F I % 0 1 -6- f t r t Cosmo Electronics Corp. Document No. 69P00006.1 http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature： 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 180~190℃： 60-120 sec Time(s) of reflow： Two Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions： 120℃ or below (package surface temperature) Time(s) of reflow： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P00006.1 -7- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Numbering System KT100 Y (Z) Notes: KT100 = Part No. Y = CTR rank option (0、5 ~ 9) Z = Tape and reel option (TLD、TRU) Option z Description Packing quantity TLD TLD tape & reel option 3000 units per reel TRU TRU tape & reel option 3000 units per reel Recommended Pad Layout for Surface Mount Lead Form Unit : mm Cosmo Electronics Corp. Document No. 69P00006.1 -8- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z 4-pin LSOP Carrier Tape & Reel TOLERANCE ： ±0.2mm Cosmo Electronics Corp. Document No. 69P00006.1 -9- http://www.cosmo-ic.com KT1000 Series 4PIN LSOP PHOTOTRANSISTOR PHOTOCOUPLER cosmo z Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69P00006.1 - 10 - http://www.cosmo-ic.com