KP4010 Series cosmo The KP4010 series consist of a photodarlington z Schematic optically coupled to a gallium arsenide infrared-emitting diode in a 4-pin DIP package and available in wide-lead 4 3 Description 1 2 z 4PIN PHOTODARLINGTON PHOTOCOUPLER spacing and SMD option. Collector-emitter voltage is 300V. It features a high current transfer ratio, low coupling capacitance and high isolation voltage. 1. Anode 2. Cathode 3. Emitter 4. Collector z Features 1. High current transfer ratio (Vceo: 300V min.) ( CTR：Min. 600% at IF=1mA VCE=2V ) 2. High isolation voltage between input and output ( Viso：5000Vrms ) 3. Compact dual-in-line package 4. Pb free and RoHS compliant 5. Agency Approvals • UL1577 / CUL C22.2 No.1 & NTC No.5, File No. E169586 • VDE EN60747, File No.101347 • FIMKO EN60065, File No. NCS/FI23149 A2 • FIMKO EN60950, File No. NCS/FI24584 A1 • SEMKO EN60065, File No. FI016484 • SEMKO EN60950, File No. FI016433 • CQC GB4943/GB8898-2011, File No.CQC10001049555 / CQC08001023986 z Applications • System appliances, measuring instruments • Industrial robots • Copiers, automatic vending machines, facsimiles • Signal transmission between circuits of different potentials and impedances • Telephone sets • Numerical control machines • Interface with various power supply circuits, power distribution boards Cosmo Electronics Corp. Document No. 69P20001.1 -1- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Unit : mm Outside Dimension 1.Dual-in-line type. 2.Surface mount type. KP40101X KP40102X 7.62 7.62 4.60 6.50 6.50 3.50 3.50 4.60 0.25 1.00 10.00±0.4 0.50 1.20 0.10±0.1 0.25 2.70 3.00 0.40 0~10° 1.20 2.54 2.54 13.00° 13.00° 4.Long creepage distance for surface mount type. 3.Long creepage distance type KP40106X KP40103X 10.16 7.62 7.62 4.60 10.16±0.50 3.50 0.25 2.70 1.20 0~10° 1.20 2.54 0.50 TOLERANCE：±0.2mm 2.54 z 0.90±0.25 11.80+0.2 -0.5 0.25 3.50 0.30 3.00 0.90±0.25 0.25 4.60 6.50 6.50 Device Marking cosmo 4010 YWW Notes: cosmo 4010 YWW □ Cosmo Electronics Corp. Document No. 69P20001.1 -2- Y: Year code / WW: Week code □: CTR rank http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z (Ta=25℃) Absolute Maximum Ratings Parameter Input Output z Symbol Rating Unit Forward current IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Collector-emitter voltage VCEO 300 V Emitter-collector voltage VECO 0.1 V Collector current IC 150 mA Collector power dissipation PC 200 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -55 to +115 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ (Ta=25℃) Electro-optical Characteristics Input Output Parameter Symbol Forward voltage VF Peak forward voltage VFM Conditions Min. Typ. Max. Unit IF=20mA - 1.2 1.4 V IFM=0.5A - - 3.5 V Reverse current IR VR=4V - - 10 μA Terminal capacitance Ct V=0, f=1KHz - 30 - pF Collector dark current ICEO VCE=200V - - 1.0 μA Current transfer ratio CTR IF=1mA, VCE=2V 600 - 9000 % - - 1.5 V - - Ω Collector-emitter saturation Isolation resistance Transfer charac- Floating capacitance teristics Cut-off frequency VCE(sat) IF=20mA, IC=5mA Riso DC500V 5x10 10 Cf V=0, f=1MHz - 0.6 1.0 pF fC VCC=5V, IC=2mA, RL=100Ω - 7 - KHz Response time (Rise) tr - 60 300 μs Response time (Fall) tf VCE=2V, IC=20mA, RL=100Ω - 50 250 μs Cosmo Electronics Corp. Document No. 69P20001.1 -3- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo Fig.1 Current Transfer Ratio 0 0 0 5 vs. Forward Current C V' 25 =2 E= Ca VT 0 0 0 1 0 1 5 2 1 5 . 0 2 . 0 1 . 0 0 Current Transfer Ratio CTR ( % ) 0 0 0 2 CTR ( % ) 600 ~ 2000 1500 ~ 4000 3000 ~ 6000 5000 ~ 9000 600 ~ 9000 0 0 0 3 KP4010 Model No. KP4010 A KP4010 B KP4010 C KP4010 D KP4010 E 0 0 0 4 Classification table of current transfer ratio is shown below. Forward Current IF (mA) Fig.2 Collector Power Dissipation Fig.3 Collector Dark Current vs. Ambient Temperature vs. Ambient Temperature Collector Dark Current ICEO ( A ) Collector Power Dissipation PC ( mW ) -5 10 250 200 150 100 50 0 -55 -7 10 -8 10 -9 10 -10 10 -11 10 0 25 50 75 115 125 -55 Ambient Temperature Ta (℃) 50 75 115 Fig.5 Forward Current vs. Ambient Temperature vs. Forward Voltage 500 Forward Current IF ( mA ) 60 Forward Current IF ( mA ) 25 0 Ambient Temperature Ta (℃) Fig.4 Forward Current 50 40 30 20 10 0 -55 VCE =200V 10-6 0 25 50 75 100 50 Ta=75° C 50° C 25° C 0° C 20 -25° C 10 5 2 1 1.0 115 125 Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P20001.1 200 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage VF (V) -4- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo Fig.6 Collector Current vs. Collector-Emitter Voltage 150 A m 0 1 = F I Relative Current Transfer Ratio ( % ) C ' 5 2 = a T 0 0 2 A m 3 A m 5 A m A 2 m 5 . 2 0 0 1 A m 5 . 1 A m 1 A m 5 . 0 0 Collector Current IC (mA) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature IF = 1 m A V CE =2V 100 50 5 4 3 2 1 0 0 -2 5 Collector-Emitter Voltage VCE (V) 100 Response Rise Time ( us ) Collector-Emitter Saturation Voltage VCE ( V ) T a = 2 5 °C Ic= 0 .5 m A 5 Ic= 1 m A 4 Ic= 3 m A 3 Ic= 5 m A Ic= 7m A 1 0 50 75 Forward Current IF (mA) VC E = 2 V Ic = 2 m A Ta=25°C 115 tr 20 10 5 2 1 0 .5 0 .2 0 .1 10 5 0 50 Fig.9 Response Time (Rise) vs. Load Resistance 7 2 25 Ambient Temperature Ta (℃) Fig.8 Collector-Emitter Saturation Voltage vs. Forward Current 6 0 0 .1 1 10 Load Resistance RL (KΩ) Fig.10 Response Time (Fall) vs. Load Resistance Response Fall Time ( us ) 100 50 V CE=2V Ic = 2 m A T a = 2 5 °C tf 20 10 5 2 1 0 .5 0 .2 0 .1 0 .1 1 10 Load Resistance RL (KΩ) Cosmo Electronics Corp. Document No. 69P20001.1 -5- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Test Circuit for Response Time c c V F I % 0 9 e c V 3 e c V 4 2 L R 1 F I % 0 1 -6- f t r t Cosmo Electronics Corp. Document No. 69P20001.1 http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature： 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 180~190℃： 60-120 sec Time(s) of reflow： Two Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions： 120℃ or below (package surface temperature) Time(s) of reflow： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P20001.1 -7- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Numbering System KP4010 X Y (Z) Notes: KP4010 = Part No. X = Lead form option (1,2,3,6) Y = CTR rank option (A ~ E) Z = Tape and reel option (TLD, TRU) Option Description Packing quantity 2 (TLD) surface mount type package + TLD tape & reel option 2000 units per reel 2 (TRU) surface mount type package + TRU tape & reel option 2000 units per reel 6 (TLD) 6 (TRU) long creepage distance for surface mount type package + TLD tape & reel option long creepage distance for surface mount type package + TRU tape & reel option 2000 units per reel 2000 units per reel z Recommended Pad Layout for Surface Mount Lead Form 2.Long creepage distance for surface mount type. 4 pin L 1.Surface mount type. 4 pin SMD Unit : mm Cosmo Electronics Corp. Document No. 69P20001.1 -8- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z 4-pin SMD Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P20001.1 -9- http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo 參考用 z 4-pin L Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P20001.1 - 10 - http://www.cosmo-ic.com KP4010 Series 4PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69P20001.1 - 11 - http://www.cosmo-ic.com