PRODUCT SPECIFICATION DATE:05/05/2011 cosmo Photocoupler: KMOC3053S ELECTRONICS CORPORATION NO.61P41004 SHEET 1 OF 6 REV. 4 Optoisolators TRIAC Driver Output (600V Volts Peak) z Features 1. Compact surface mount type package. 2. 600V peak blocking voltage. 3. Isolation voltage between input and output (Viso:5000Vrms). z For 115/240 Vac(rms) Application: 1. Solenoid/Valve Controls. 2. Lighting Controls. 3. Static Power Switches. 4. AC Motor Drives. 5. Temperature Controls. 6. E.M. Contactors. 7. AC Motor Starters. 8. Solid State Relays. 9. Programmable controllers. PRODUCT SPECIFICATION DATE:05/05/2011 Photocoupler: cosmo ELECTRONICS CORPORATION NO.61P41004 KMOC3053S SHEET 2 OF 6 REV. 4 1. OUTSIDE DIMENSION:UNIT (mm) 3053 XXX Date Code Anode 7.62 6.50 0.254 1.00 10.00±0.4 1.2 2.54 0.254 0.10±0.08 3.5 7.3 5.08 TOLERANCE : ±0.2mm 2. SCHEMATIC:TOP VIEW 1 6 2 3 4 1. Anode 2. Cathode 3. NC 4. Main Terminal 6. Main Terminal PRODUCT SPECIFICATION DATE:05/05/2011 Photocoupler: cosmo KMOC3053S ELECTRONICS CORPORATION z REV. 4 SHEET 3 OF 6 Absolute Maximum Ratings Parameter Symbol Rating Unit IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Off-State Output Terminal voltage VDRM 600 VPEAK On-State R.M.S. Current IT(RMS) 100 mA ITSM 1 A Power dissipation PD 300 mW Total power dissipation Ptot 330 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -40 to +100 ℃ Storage temperature Tstg -50 to +125 ℃ Soldering temperature 10 second Tsol 260 ℃ Forward current Input Output Peak Repetitive Surge Current (PW=10ms.DC 10%) z NO.61P41004 Electro-optical Characteristics Parameter Forward voltage Input Peak forward voltage Reverse current Peak Blocking Current Output ON-State Voltage Holding Current Critical rate of rise of OFF-state Tranfer voltage characteristics Isolation resistance Minimum trigger current Turn-on time Symbol Conditions IF=10mA IFM=0.5A VR=4V VDRM=600V ITM=100mA Min. - Typ. 1.2 1.6 0.1 Max. 1.4 3.5 10 100 3 - Unit V V uA nA dV/dt VDRM=(1/ 2 )*Rated 600 - - V/uS Riso IFT DC500V Main Terminal Voltage=3V 5x1010 - 1011 - 5 Ohm mA Ton VD=6V,RL=100Ohm,IF=20mA - - 100 uS VF VFM IR IDRM VTM IH V mA PRODUCT SPECIFICATION DATE:05/05/2011 Photocoupler: cosmo NO.61P41004 KMOC3053S ELECTRONICS CORPORATION Diode Power Dissipation PD(mW) Forward Current IF(mA) 50 40 30 20 10 0 0 55 25 75 100 125 100 80 70 60 40 20 0 -30 Ambient Temperature Ta(℃) Total Power Dissipation PC(mW) On-State R.M.S. Current (mA) 100 80 60 40 20 55 25 75 100 400 330 300 200 100 Forward Current IF(mA) Peak Forward Current IFM(mA) 100 10 Duty Ratio 75 50 100 500 1000 -2 25 Fig.6 Forward Current vs. Forward Voltage Ta=25°C 10 0 Ambient Temperature Ta(℃) Pulse width <=100us -3 100 500 0 -30 125 Fig.5 Peak Forward Current vs. Duty Ratio 10 75 50 600 Ambient Temperature Ta(℃) 10000 25 Fig.4 Total Power Dissipation vs. Ambient Temperature 120 0 0 Ambient Temperature Ta(℃) Fig.3 On-State R.M.S. Current vs. Ambient Temperature 0 -30 SHEET 4 OF 6 Fig.2 Diode Power Dissipation vs. Ambient Temperature Fig.1 Forward Current vs. Ambient Temperature -30 REV. 4 -1 10 200 Ta=75°C 50°C 100 50 25°C 0°C -25°C 20 10 5 2 1 1 0 0.5 1.0 1.5 2.0 Forward Voltage VF(V) 2.5 3.0 PRODUCT SPECIFICATION DATE:05/05/2011 Photocoupler: cosmo NO.61P41004 KMOC3053S ELECTRONICS CORPORATION Fig.8 Leakage with LED off vs. Ambient Temperature Fig.7 On-State Characteristics On-State Current (mA) +300 500 Output Pulse Width 80us I F =30mA,f=60Hz,Ta=25°C I F =0,VDRM =Rated Peak Blocking Current IDRM(nA) +400 +200 +100 0 -100 -200 -300 -400 -3 -2 -1 0 +1 +2 +3 On-State Voltage (V) IFT, Normalized Fig.9 Trigger Current vs. Ambient Temperature 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 Normalized To Ta=25°C -40 -20 SHEET 5 OF 6 REV. 4 0 20 40 60 80 100 Ambient Temperature Ta(℃) 200 100 50 20 10 5 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta(℃) PRODUCT SPECIFICATION DATE:05/05/2011 cosmo ELECTRONICS CORPORATION Photocoupler: KMOC3053S NO.61P41004 SHEET 6 OF 6 REV. 4 NOTICE The information contained in this document is intended to be a general product description and is subject to change without notice. Please contact cosmo in order to obtain the latest device data sheets before using any cosmo device. cosmo does not assume any responsibility for use of any circuitry described. No circuit patent licenses are implied. This publication is the property of cosmo . No part of this publication may be reproduced or copied in any form or by any means, or transferred to any third party without the prior written consent of cosmo Electronics Corporation. The devices listed in this document are designed for general applications only in electronic equipment. No devices shall be deployed which require higher level of reliability such as: - Medical and other life support equipments. - Space application. - Telecommunication equipment (trunk lines). - Nuclear power control equipment. Unless it received prior written approval from cosmo. cosmo takes no responsibility for damages arise form the improper usage of our device. Please contact cosmo for further information regarding the above notices.