SENSITRON SEMICONDUCTOR SCP-6267 PART NUMBER: SCP-6267, REV - 10 AMP LINEAR VERY LOW DROPOUT POSITIVE ADJUSTABLE VOLTAGE REGULATOR FEATURES: Isolated Hermetic Package Dropout 0.40V (typ.) at 10A Current Limit Protection MAXIMUM RATINGS Parameter Input Voltage Lead Temperature Maximum Thermal Resistance Junction to Case ( JC) Junction Temperature Operating Temperature Storage Temperature Range All ratings are at TA = 25 C unless otherwise specified. Conditions Limit 36 +300 2.5 Units V C C/W -55 to +175 -55 to +125 -65 to +150 C Min 1.222 Max 1.248 Units V - 1.0 % - 1.0 2.0 10 .5 11.5 % mA V A Soldering, 10 seconds C ELECTRICAL CHARACTERISTICS Parameter Reference Voltage (VREF) Line Regulation (VRLINE) Load Regulation (VRLOAD) Conditions VIN - VOUT = 3.0V, IOUT = 10mA 1.5V VIN - VOUT 25V, 10 mA IOUT = 10mA , 1.5V VIN - VOUT VIN - VOUT = 3.0V,10mA IOUT IOUT IFULL LOAD 15V IFULL LOAD Quiescent Current VIN - VOUT = 3.0V, IOUT = 10mA Dropout Voltage IOUT = 10A, VREF = 1% Current Limit 10 Parameters in boldface denotes the specification applies over the full operating temperature range. R1 = R2((Vout/1.235)-1) Recommended R2 is 10k. Recommended C1 is 10uF min. Recommended C2 is 10uF. (Not required for stability.) ©2010 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 www.sensitron.com [email protected] SENSITRON SEMICONDUCTOR SCP-6267 PART NUMBER: SCP-6267, REV MECHANICAL DIMENSIONS: In Inches / mm .695 (17.65 .685 17.40) .270 (6.86 .240 6.10) .165 (4.19 .155 3.94) .045 (1.14 .035 .89) .835 (21.21 .815 20.70) .707 (17.96 .697 17.70) .550 (13.97 .530 13.46) 1 2 3 4 5 .045(1.14) R .750 (19.05 .500 12.70) .035 (.89 .025 .64) .140 (3.56) T yp .100 (2.54) T yp MO-078 PINOUT TABLE TYPE Voltage Regulator MO-078 Package PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 + Input Adj Gnd Output Output DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2010 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 www.sensitron.com [email protected]