SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary Transient Voltage Suppressor, Unidirectional The SCP-0704 series products are rugged Transient Voltage Protection (TVS) devices protecting to the MIL-STD-704 standard for the 28VDC systems (nominal). FEATURES: Designed For MIL-STD-704 28VDC Power Supply Protection Functionally Equivalent to Industry Standard 704-15K36T Parts Compliant with Applicable Environmental MIL-S-19500 Sections 15kW Assembly with Source Impedance of Typ. 0.25Ω for Transients Optionally Supplied with JAN/JANTX Parts MARKETS: APPLICATIONS: Avionics Equipment Military Electronics UAV’s Industrial Systems MAXIMUM RATINGS Rating Peak Pulse Power Dissipation Steady State Power Dissipation T clamping Operating & Storage Temp. Forward Surge Current Duty Cycle Power Conversion Power Management Power Distribution Battery Management Condition Minimum Maximum Units @ 25°C, 1ms - 15,000 Watts - - 10 Watts 0 Volts to V(BR) - - -65 + 150 °C 1/120 sec. @ 25°C - - 300 0.01 Amps % 1x 10 –12 Seconds ELECTRICAL CHARACTERISTICS @ 25°C (Test Both Polarities) Part Number SCP-0704 Reverse StandOff Voltage (Note 1) VWM Volts Maximum Reverse Leakage @ Vwm ID A 31.5 100 Minimum Breakdown Voltage @ 10 mA V(BR) Volts Maximum Clamping Voltage @ IPP Vc Volts Maximum Peak Pulse Current (Fig. 2) IPP Amps Maximum Forward Voltage VF @ 8.3 msec. 100A Volts DC 36 51 300 3.0 Note 1: A device is normally selected according to the reverse “Standoff Voltage” (VWM) which should be equal to or greater than the DC or continuous peak operating voltage level. Please, call factory for Special Voltages. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary MECHANICAL CHARACTERISTICS CASE: Molded Case TERMINAL: Silver Plated Brass . POLARITY: + and - Marking WEIGHT: 2.5 oz MECHANICAL DIMENSIONS: In Inches / mm ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected] SCP-0704 TECHNICAL DATA DATA SHEET SCP-0704, Preliminary DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 www.sensitron.com [email protected]