SENSITRON SEMICONDUCTOR PIP8.4 to PIP500 TECHNICAL DATA DATA SHEET 564, REV. C Transient Voltage Suppressor Module FEATURES: Equivalent Industry Standard Part Numbers –PIP8.4 to PIP500 7,500 and 15,000 Watts Peak Pulse Power Dissipation Available in ranges from 8.4 to 500 Volts Each device is 100% tested Designed for Commercial applications PIP is designed for applications requiring “across the line” AC power protection. These TVS modules are used in applications where extreme voltage transients can permanently damage voltage sensitive systems or components. MAXIMUM RATINGS Rating Peak Pulse Power Dissipation Average Steady State Power Dissipation tclamping Condition @ 25°C, 1ms @ 50°C 0 Volts to V(BR) Operating & Storage Temp. - Part Number PIP8.4 PIP24 PIP30 PIP60 PIP120 PIP206 PIP250 PIP440 PIP500 Average RMS Voltage Volts AC Reverse Stand-Off Voltage (note 1)VWM Volts DC 8.4 24.0 30.0 60.0 120.0 208.0 250.0 440.0 500.0 12.0 34.0 42.5 85.0 170.0 295.0 354.0 623.0 708.0 Minimum Breakdown Voltage V(BR) @ It Volts mA 14 40 50 100 200 347 418 735 835 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Minimum -65 Maximum Reverse Leakage @ Vwm ID @ VWM A 250 250 250 250 250 250 250 250 250 Maximum 7,500 & 15,000 7.5 1x 10 + 150 –8 Units Watts Watts Seconds °C Maximum Clamping Voltage Vc @ IPP Volts dc Maximum Peak Pulse Current IPP Amps 22 67 84 167 319 536 652 1138 1292 341 112 90 90 47 28 23 13.2 11.6 Maximum Peak Pulse Power (I msec) PP Kilowatts 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 Special Voltages available from the factory. Note 1: A device is normally selected according to the reverse “Stand Off Voltage” (VWM) which should be equal to or greater than the DC or continuous peak operating voltage level. MECHANICAL CHARACTERISTICS CASE: Molded case. TERMINAL: Hot solder dipped POLARITY: Bidirectional WEIGHT: 50 grams (Appx.) MOUNTING POSITION: Any COMMERCIAL APPLICATIONS: PIP series sub-assemblies are packaged in a molded epoxy case ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] PIP8.4 ~ PIP500 TECHNICAL DATA DATA SHEET 564, REV. C MECHANICAL DIMENSIONS: In Inches / mm DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]