SENSITRON SEMICONDUCTOR SEN-0541 TECHNICAL DATA Preliminary Data Rev.- POWER OPERATIONAL AMPLIFIER Applications: • Motor Drivers • Servo Amplifiers • Magnetic Deflection • Audio Features: • • • • • • • 10A Peak Current Supply Range ±10V to ±40V Programmable Current Limit Replacement for OPA541, OMA541, MSK541 Wide Range of Available Packages Hermetic and Non-Hermetic Versions Available MIL-STD-883 Screening Available Maximum Ratings: Supply Voltage, Vs Continuous Output Current Power Dissipation, Internal Case Operating Temperature Range Storage Temperature Range Junction Temperature Differential-Mode Input Voltage Common-Mode Input Voltage ±40V 5A 125W -550C to 1250C -550C to 1500C 1500C ±Vs ±Vs Electrical Characteristics: Characteristics Max. Forward Voltage Drop Max. Reverse Current Symbol VF1 VF2 IR1 IR2 Max. Junction Capacitance CT Condition @ 1A, Pulse, TJ = 25 °C @ 1A, Pulse, TJ = 125 °C @VR = 45V, Pulse, TJ = 25 °C @VR = 45V, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) Max. 0.56 0.51 100 Units V V µA 4.5 mA 53 pF • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SEN-0541 TECHNICAL DATA Characteristics Symbol Condition1 Grp. A Min. Max. Units 1 -1 +1 mV 2,3 -30 +30 µV/°C Input offset voltage VIO TA= +25°C Input offset voltage drift ∆VIO /∆T TA= -55°C and +125°C Input bias current ±IIB 1 2,3 -50 -50 +50 +50 pA nA Input offset current IOS 1 2,3 -30 -20 +30 +20 pA nA Power supply rejection ratio +PSRR 1 -10 +10 µV/V 2,3 -20 +20 1 -10 +10 2,3 -20 +20 1 95 2,3 90 1,2,3 -30 4 ±28.0 5,6 ±30 4 ±5 5,6 ±3 4 95 5,6 86 7 ±6 -PSRR Common mode rejection ratio CMRR Supply currents ±ICC Output voltage peak VOP -VCC= -34V dc, +VCC= +10 V to +40 V dc +VCC= +34V dc, -VCC= -10 V to -40 V dc VCM= ±22 V dc, f = dc VCM= 0 V, no load condition IO= 5 A peak, RL= 5.6Ω, 10 kHz sine wave, µV/V dB +30 mA V TA= +25°C RL= 10Ω, 10 kHz sine wave, Output current peak IOP TA= -55°C and +125°C RL= 5.6Ω, VOUT= ±28 V, TA= +25°C 2/ RL= 10Ω, VOUT= ±30 V TA= -55°C and +125°C 2/ 3/ Voltage gain AVS RL= 10 kΩ Slew rate ±SR RL= 10.0Ω, TA= +25°C A dB V/µs 1 -55°C ≤ TA ≤ +125°C, ±VCC = ±34 V dc unless otherwise specified Internal current limit circuitry is controlled by a single external resistor, RCL. To calculate the value of the current limit resistor, use RCL= (0.809/ILIM) - 0.057, where ILIMis equal to the desired output current (IOP). 3 Test can be performed using RL= 10 kΩwith a minimum limit of ±3 mA. 2 • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SEN-0541 TECHNICAL DATA *OTHER PACKAGES ARE AVAILABLE. PLEASE CONSULT FACTORY. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •