SENSITRON SEMICONDUCTOR SEN-5425 PART NUMBER: SEN-5425, REV. B SURGE SUPPRESSOR MODULE (MIL-STD-1399) This rugged, high power module is capable of protecting sensitive electrical systems from high-energy transients and over-voltage power surges in either direction. Features: • 460KW Power Handling Capacity across L-N • Very Fast Response < 1 nsec • Bi-Polar Protection • Rugged Epoxy Construction • Internally Hermetically Sealed • Suitable for PCB or Panel Mounting • Protects both Common and Differential Mode Transients • No Limitation on Load Current capability Applications: ● This module is specifically designed for direct connection to 120V AC single phase systems. Operating Conditions: • Line Voltage (L-N): 100VAC ~ 150VAC, 50Hz~440Hz, Single Phase Source Impedance: L-N: 2 Ohms min N-G: 12 Ohms min L-G: 12 Ohms min Surge and Clamp Protection: The following data apply to all 3 pairs: L-N, L-E and N-E, unless otherwise specified • Breakdown Voltage VZ: Minimum 233V, Maximum 258V (Measured @ 25°C @ 5mA) • Operating Temperature: -40°C to 85°C • TC (VZ) + 0.1% / °C • Clamping limit VC in either direction @ corresponding IPP, TC =25OC 1.2 / 50usec waveform as per MIL-STD-1399 VCL(max) IPP L-N: 1200A 385 V N-G: 200A 330 V L-G: 200A 330 V Construction: • Consists of discrete hermetic sealed large area bipolar silicon devices ©2003 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • www.sensitron.com • [email protected] • SENSITRON SEMICONDUCTOR SEN-5425 PART NUMBER: SEN-5425, REV. B Mechanical Dimensions: In inches DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2003 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 • www.sensitron.com • [email protected] •