SCP-5282-6A SCP-5282-6B SENSITRON _ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: SCP-5282-6A/B, Rev. C High Power Bipolar TVS Module (137KW) for Load Dump & Lightning Strike Protection Application: Lightning strike protection 28V system bus protection 100% tested to MIL-STD-1275 Pulse 100% tested to 50/500 µs, 1600A Pulse High power dissipation and bi-directional capability Surface mount and thru hole packages actual part appearance may vary actual part appearance may vary SCP-5282-6A SCP-5282-6B 0 Electrical Characteristics: Tj = 25 C unless otherwise specified PARAMETER SYMBOL MIN TYP MAX UNIT Peak Pulse Power 50/500 µs waveform PPPM - 137 - KW Peak Pulse Current 50/500 µs waveform IPPM 1600 - - A Clamp Voltage @ IPPM 50/500 µs waveform VCL - 86 90 V Peak Pulse Power MIL-STD-1275 waveform PPPM - 4 - KW Peak Pulse Current MIL-STD-1275 waveform IPPM 54 - - A Clamp Voltage @ IPPM MIL-STD-1275 waveform VCL - 73 77 V 52 - - V - - 30 µA 60 64 - V Reverse Standoff Voltage VRWM Reverse Leakage Current @ VRWM IR Breakdown Voltage @ IT = 5mA VBR ©2014 Sensitron Semiconductor 100 Engineers Road Hauppauge, NY 11788 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SCP-5282-6A SCP-5282-6B SENSITRON _ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: SCP-5282-6A/B, Rev. C Package Characteristics Recommended Operating Temperature Range TOP - 40 - 85 O Junction Temperature Range TJ -40 - 150 O Storage Temperature Range TS - 55 - 150 O Module Weight M - 20 - Electrical Schematic ©2014 Sensitron Semiconductor 100 Engineers Road Hauppauge, NY 11788 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] C C C gms SCP-5282-6A SCP-5282-6B SENSITRON _ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: SCP-5282-6A/B, Rev. C Mechanical Drawing SCP-5282-6A 1.250 ±.02 .950 MAX .500 .300 MAX .150 .050 UNCONTROLLED SURFACES .470 MAX .225±.010 TOLERANCE = .005 UNLESS OTHERWISE NOTED TYPICAL ARTWORK 1.330 .740 .150 .300 .080 Soldering note: Part has high heat capacity. Solder reflow profile may require longer soak times and/or higher temperatures to achieve proper reflow. ©2014 Sensitron Semiconductor 100 Engineers Road Hauppauge, NY 11788 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SCP-5282-6A SCP-5282-6B SENSITRON _ SEMICONDUCTOR TECHNICAL DATA PART NUMBER: SCP-5282-6A/B, Rev. C Mechanical Drawing SCP-5282-6B UNCONTROLLED SURFACES .420 MAX .050 TYP STAND-OFF .120 MIN .020 1.00±.010 .950 MAX .500 .300 MAX .150 .050 Soldering note: Part has high heat capacity and may need to be pre-warmed prior to solder iron or wave solder reflow to achieve proper reflow. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2014 Sensitron Semiconductor 100 Engineers Road Hauppauge, NY 11788 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]