SENSITRON ____ SEMICONDUCTOR

SENSITRON
____
SEMICONDUCTOR
SCP-5282-2
TECHNICAL DATA
PART NUMBER SCP-5282-2, REV A.1
High Pulse Power Mil-STD-1275 Transzorb
Application:
+28V DC systems
Bi-Directional
Protection Level:
MIL-STD-1275 Compliant; 100V Surge withstanding with 0.5-ohm source impedance
Capable of handling 100A peak current, single 130 msec square current pulse
100% tested for 5 pulses of 100A, 50 msec square current pulse with 1 sec delay between pulses and
50°C base plate temperature
Key Features:
Allows the use of 55V high efficiency FET
Increase system reliability through eliminating avalanche FET operation
Clamping below 55V DC for both 100V and 250V pulse
High Pulse Power Capability
Non-Hermetic version
Part Ordering Information:
SCP-5282-2: with threaded terminals
Rating
Peak Pulse Power Dissipation
Steady State Power Dissipation
Reverse Stand-Off Voltage
Reverse Leakage
Breakdown Voltage
Clamping Voltage
Peak Pulse Current
T clamping
Operating & Storage Temp.
Condition
0
@ 25 C, 1ms
0
@ 25 C
-
@ VWM
@ 10 mA
@ IPP
0 Volts to V(BR)
-
Symbol
Min
Ppk
P
VWM
ID
V(BR)
Vc
I PP
36.7
-
Top& Tstg
-55
Max
60
40
33
25
49
100
1x 10 –8
+ 150
Units
KW
Watts
Volts
A
Volts
Volts
Amps
Seconds
0
C
Notes:
SCP-5282 products require two additional #8-32 nuts in order to secure the connections (not
provided). Nuts shall be hand-tightened prior the maximum 12 in-lb torque is applied. Caution: the
high-speed torque drivers may cause thread damage on SCP-5282’s copper screw terminals.
©2011 Sensitron Semiconductor 221 West Industry Court
Deer Park, NY 11729-468
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]
SENSITRON
____
SEMICONDUCTOR
SCP-5282-2
TECHNICAL DATA
PART NUMBER SCP-5282-2, REV A.1
SCP-5282-2
(Threaded Terminals)
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2011 Sensitron Semiconductor 221 West Industry Court
Deer Park, NY 11729-468
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]