Micro-actuator Driver - Silicon Touch Technology Inc.

MD311
Version
Issue Date
File Name
Total Page
:
:
:
:
A.004
2014/7/1
SP-MD311-A.004.doc
7
Micro-actuator Driver
新竹市展業一路 9 號 7 樓之 1
SILICON TOUCH TECHNOLOGY INC.
9-7F-1, Prosperity Rd I, Science-Based Industrial Park
Hsinchu, Taiwan, R.O.C.
Tel:886-3-5727171
Fax:886-3-5727390
MD311
MD311
Micro-actuator Driver
General Specifications
MD311 is a micro-actuator driver IC with miniature package. It is one channel low
voltage bi-directional motor driver IC. The design is optimal for driving different type
micro-actuator, such as OIS motors, voice coil motors, piezo-actuators, or other DC motor
actuators. It is suitable for camera module application or other portable device.
Features and Benefits
◆
Low voltage operation (VDD Min = 1.8 V)
◆
Low input current
Zero standby current
High frequency switch (1MHz)
Thin, small package (LFCSP6 / WLCSP6)
◆
◆
◆
Pin Assignment
Pin Num.
Pin Name
1
VP2
Driver control pin2
2
VDD
Power supply
3
VO2
Driver output 2
4
VSS
Ground
5
VO1
Driver output 1
6
VP1
Driver control pin1
BULK
Micro-actuator Driver
Description
Ground
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
Page 1
MD311
Absolute Maximum Ratings ( Unless otherwise noted, TA= 25℃ )
Characteristic
Symbol
Rating
Unit
Supply Voltage
VDD
4.5
V
Input Voltage
VP1
VDD+0.4
V
IO Peak Current
IOPeak
400
mA
IODC Current
IODC
280
mA
Power Dissipation
PD
300 (LFCSP6)
mW
300(WLCSP6)
Operating Temperature Range
TOPR
-40 ~ 80
°C
Storage Temperature Range
TSTG
-65 ~ 150
°C
Electrical Characteristic
(Unless otherwise noted, TA= 25℃ & VDD=2.8V)
Limit
Characteristic
Sym.
Supply Voltage
VDD
Standby Current
IDD
Unit
Condition
No load
Min.
Typ.
Max.
1.8
2.8
4.5
V
-
-
3
μA
VP1 VP2 and PD Input Terminal ( TJ = 25℃)
Input Voltage “H”
VIH
-
0.5*VDD
-
VDD+0.4
V
Input Voltage “L”
VIL
-
-0.4
-
0.2*VDD
V
Input Current “H”
IIH
VIN = VDD
-
-
±1
μA
Input Current “L”
IIL
VIN = 0 V
-
-
±1
μA
Output Terminal (O1, O2)
Output Resistance (Upper)
ROH
IOUT=200mA
-
1.32
1.6
Ohm
Output Resistance (Low)
ROL
IOUT=200mA
-
0.73
0.9
Ohm
Micro-actuator Driver
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
Page 2
MD311
Truth Table
Input
Output
VP1
VP2
O1
O2
L
L
H
H
L
H
H
L
H
L
L
H
H
H
L
L
Function Block
VDD
VP1
O1
Control
M1
VP2
O2
GND
Application Notes
…
The O1/O2 output H/H or L/L will brake the motor. Though the active current of
driver is near to zero, if the application is required to turn off driver, please turn off
the driver’s power from VDD.
…
The capacitor connected between the output nodes O1/O2 will reduce the noise
generating by motor when the motor is switched to opposed direction.
Micro-actuator Driver
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
Page 3
MD311
Package Specifications ( LFCSP6 )
Note:
1 and XX of the “1XX” are the
product number and lot numbers b
DIMENSION
(mm)
SYMBOL
MIN.
0.33
0.00
A
A1
A3
b
D
D1
E
E1
E2
e
e1
L
L1
y
0.22
1.50
0.50
1.30
1.00
1.30
0.25
-
Micro-actuator Driver
NOM.
0.38
0.02
0.127 REF
0.30
1.60
0.60
1.40
1.10
1.40
0.50 BASIC
1.00 BASIC
0.30
0.05 BASIC
-
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
MAX.
0.43
0.05
0.38
1.70
0.70
1.50
1.20
1.50
0.35
0.08
Page 4
MD311
Package Specifications(WLCSP): (0.450mm*0.881mm*0.325mm)
TOP VIEW
BOTTOM VIEW
SYMBOL
MIN.
0.302
0.067
0.235
0.860
0.429
0.090
A
A1
A2
D
E
b
e
Micro-actuator Driver
DIMENSION
(mm)
NOM.
0.325
0.075
0.250
0.881
0.450
0.100
0.250
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
MAX.
0.348
0.083
0.265
0.903
0.472
0.110
Page 5
MD311
The products listed herein are designed for ordinary electronic applications, such as
electrical appliances, audio-visual equipment, communications devices and so on.
Hence, it is advisable that the devices should not be used in medical instruments,
surgical implants, aerospace machinery, nuclear power control systems,
disaster/crime-prevention equipment and the like. Misusing those products may
directly or indirectly endanger human life, or cause injury and property loss.
Silicon Touch Technology, Inc. will not take any responsibilities regarding the
misusage of the products mentioned above. Anyone who purchases any products
described herein with the above-mentioned intention or with such misused
applications should accept full responsibility and indemnify. Silicon Touch Technology,
Inc. and its distributors and all their officers and employees shall defend jointly and
severally against any and all claims and litigation and all damages, cost and
expenses associated with such intention and manipulation.
Silicon Touch Technology, Inc. reserve the right to make changes to their products or
to discontinue any product or service without notice, and advise customers to obtain
the latest version of relevant information to verify, before placing orders, that
information being relied on is current and complete.
Micro-actuator Driver
Version:A.004
未經授權而逕予重製、複製、使用或公開本文件,行為人得被追究侵權之相關民刑事責任
Unauthorized reproduction, duplication, use or disclosure of this document will be deemed as infringement.
Page 6