Sharma Electrolytic Capacitors SP Features Lifetime:105 ,1000hrs Wide temperature range for SN Non-polarized/Polarity reversing Low profile/Miniature 7mm height Series Specifications Recommended Applications Reversed polarity circuit Coupling Items Characteristics 20% (M) (120Hz,20 4~63 VDC -40 ~ +105 Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20 ) Leakage Current (Max) (20 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I 0.06CV+10 A (After rated voltage applied for 2 minutes) I= Leakage Current ( A) C= Nominal Capacitance ( F) V= Rated Voltage (V) ) Dissipation Factor (Max) (tan ) (120Hz ,20 ) 4 5 ) WV tan 4 0.35 6.3 0.24 WV Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 4 Z (120Hz) Z(-25 Z(-40 ) / Z(20 ) / Z(20 10 0.20 6.3 16 0.16 10 25 0.16 16 35 0.14 25 35 50 0.12 63 0.10 50 63 ) ) 6 4 3 2 2 2 2 12 8 6 4 4 3 3 After applying rated voltage for 1000 hours at 105 , the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within 20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105 without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 2 3 Refer to JIS C-5101 Applicable standards Dimensions (mm) D P d a 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~10 16~25 35~63 Temperature coefficient Ambient Temperature ( ) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.20 1.50 1.20 1.30 1.70 50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Sharma Electrolytic Capacitors Case Size CASE SIZE ( Max Ripple Current DxL(mm)) 4 WV SPEC F DxL SPEC 6.3 RC DxL 10 RC DxL 16 RC DxL 25 RC RC RC 4x7 15 4x7 15 5x7 15 5x7 20 5x7 20 6.3x7 35 4x7 20 5x7 25 6.3x7 30 5x7 30 5x7 35 6.3x7 40 6.3x7 45 6.3x7 55 5x7 35 6.3x7 45 6.3x7 50 5x7 35 6.3x7 45 6.3x7 55 6.3x7 60 6.3x7 55 50 DxL 20 30 DxL DxL 35 4x7 5x7 WV F MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105 63 RC DxL RC 4x7 1 4x7 1 4x7 2 4x7 2 4x7 3 4x7 3 4x7 5 4x7 5 4x7 10 4x7 15 4x7 15 5x7 20 5x7 20 6.3x7 25 6.3x7 25 6.3x7 30 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327