Sharma Mica Capacitors MICA CAPACITOR - formerly SAHA PART NUMBERING SYSTEM Sample Part Number: DM15FD151JO3 Description: DM15 Series, 150pF, 500 Volt, 5%, RoHS Compliant, Tape & Reel, Inside Crimped D 1 M F 5 D 1 5 1 J O 3 - RH T R 0 2 Series Enter Series Code: (up to 4 Characters) Series included: DM05, DM10, DM12, DM15, DM19, DM20, DM30, DM42. Characteristic Enter characteristic code: ( 1 Character) Temperature Characteristic Coefficient Capacitance Letter C PPM/C -200 to +200 Drift ± (0.5% + 0.1pF) D -100 to +100 ± (0.3% + 0.1pF) E -20 to +100 ± (0.1% + 0.1pF) F 0 to +70 ± (0.05% + 0.1pF) see catalog for individual part characteristic code Rated Voltage Enter voltage code: (1 character) Rated Voltage Code Letter Code Volts DCW Rated Voltage Code Letter Code Volts DCW Y 50 E A 100 D 350 500 C 300 F* 1000* * Note: Not for use in snubber applications Capacitance Enter EIA Capacitance Code: (3 Digits) First Two Digits represents significant figures of capacitance in Picofarads. Third Digit indicates number of zeros to follow. Example: 10pF = 100, 100pF = 101, 1000pF = 102 Tolerance Enter Capacitance Tolerance Code: ( 1 Character) Tolerance Code D ± 0.5pF H ±3 % E F ± 0.5 % ±1 % J K ±5 % ± 10 % G ±2 % Temperature Range Code O = -55 to +125 C Vibration Grade Standard Grade = 3 (see catalog for details) Marking RH= RoHS Compliant; S for Standard non- RoHS Compliant parts Package Type Bulk Ammo Pack < Blank > A Tape & Reel T Special Specifications C Cut followed by 2 Digit specification code 01 -99 R Crimped followed by 2 Digit specification code 01 -99 P Cut & Crimped followed by 2 Digit specification code 01 -99 Examples: C 0 2 = cut leads to 0.175 mm P 0 2 = cut leads to 0.175 mm and inside crimp (See Special Specifications Sheet) Rev D - 2/99 Part Marking 150 ± 5% 500V SAHA TYPE 1 TYPE 1- Capacitance in pF, tolerance in percentage or +/CM 05 FD pF and voltage(Vdc) are indi151JO3 cated in numbers along with SAHA the brand marking. Brand marking of “SAHA”, “SH”, "SM",“KEC” are common. Parts are also supplied with no brand marking in some cases based TYPE 2 on product availability and customer requirements. Tel:(949)642-SECI TYPE 2 - Formerly for Military certified Capacitors. The CM series code has been discontinued. SECI Engineers & Buyers' Guide 151J or 150 pF +/- 5% TYPE 3 TYPE 3 - Capacitance in EIA capacitance code (as in Type 2) and tolerance with tolerance code or capacitance value in pF with tolerance in +/% or +/- pF are marked on the capacitors. Voltage is not marked on the part. Brand marking is optional. Fax:(949)642-7327