Metallized Polyester Film Capacitors NRM-S Series EPOXY COATED, NON-INDUCTIVE, CAPACITORS, REDUCED SIZE, RADIAL LEAD FEATURES • NON-INDUCTIVE CONSTRUCTION • EPOXY RESIN COATED FOR EXCELLENT MOISTURE RESISTANCE • METALLIZED CONTRUCTION PROVIDE SELF HEALING CHARACTERISTICS • HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE • HIGH PERFORMANCE AT LOW COST • REDUCED SIZE • LEAD FORMING AND CUT LEADS AVAILABLE RoHS Compliant includes all homogeneous materials *See Part Number System for Details SPECIFICATIONS Operating Temperature Rated Voltage (VDC) Capacitance Range Capacitance Tolerance -40°C ~ +85°C 100V, 250V, 400V, 630V 0.01μF ~ 10μF ±10% (K), ±5% (J) C < 0.33μF IR > 9,000 Megohm C > .33μF IR > 3,000 Megohm/μF 1% (at 1KHz/25°C) 150% of Rated Voltage for 5 Seconds Insulation Resistance Dissipation Factor Dielectric Strength L max. T max. H max. *2mm max. L > 20mm 1.5mm max. L < 20mm Part Number SYSTEM NRM-S 104 K 250 F2 F LL = 25mm min. RoHS compliant Special Lead Forming Voltage (VDC) Tolerance Code J = ±5%, K = ±10% Series dφ Capacitance code in pF, first two digits are significant, third digit is no. of zeros. E.G. 102 = .001μF, 103 = .01μF, 104 = .1μF S ± 1mm LEAD SPACING (BULK) AND DIAMETER (mm) L 13.0 18.0 26.0 31.0 S 10.0 15.0 22.5 27.5 0.6 0.8 0.8 0.8 dφ SEE TAPING SPECIFICATIONS FOR LEAD-SPACING FOR TAPE & BOX PACKAGED STANDARD PRODUCTS AND CASE SIZE TABLE (mm) Cap. (μF) 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 100VDC/63VAC L T H 12.5 6.5 10.5 12.5 7.0 12.0 18.5 8.5 13.0 18.5 7.5 15.5 18.5 9.0 16.5 26.0 8.0 16.5 26.0 9.5 17.5 26.0 11.0 21.0 250VDC/160VAC L T H 12.5 8.5 10.5 12.5 7.0 12.0 18.5 6.0 12.5 18.5 7.0 13.5 18.5 8.0 16.0 18.5 9.5 17.5 26.0 9.0 17.5 26.0 11.0 19.5 26.0 12.5 22.5 31.0 14.0 22.5 31.0 16.0 28.5 400VDC/200VAC L T H 12.5 5.5 8.5 12.5 6.0 10.0 12.5 7.0 11.0 18.5 5.5 12.0 18.5 6.5 13.0 18.5 7.5 14.0 18.5 8.5 16.5 26.0 7.5 17.0 26.0 8.5 18.5 31.0 9.5 19.0 31.0 11.5 21.5 - 630VDC/220VAC L T H 12.5 5.0 8.5 12.5 5.5 8.5 12.5 5.5 10.5 12.5 6.5 11.0 12.5 7.5 12.0 18.5 6.5 11.5 18.5 7.0 13.5 18.5 8.0 16.0 18.5 9.5 17.5 26.0 8.5 18.0 26.0 10.5 19.0 26.0 12.0 22.0 31.0 13.5 22.0 31.0 18.5 25.0 31.0 20.0 29.0 - ® 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Radial Lead Taping Specifications Film Capacitors TAPE & REEL FOR RADIAL LEAD CAPACITOR REFER TO EIA STANDARD RS-468 Crimped Lead Taping (STANDARD) P2 Straight Lead Taping (SPECIAL) Contact NIC for Availability*. P P1 P2 F P1 W2 H1 W1 W0 L W1 W W0 D0 I0 P0 W2 F H2 H0 L P I0 I P0 W D0 Δh B max. *NOTE: STANDARD LEAD SPACING ON TAPED PARTS IS 5MM. SPECIAL 7.5MM, 10MM AND 15MM LEAD SPACING MAY BE AVAILABLE UPON SPECIAL REQUEST. TO SPECIFIC: LEAD SPACING P/N SUFFIX 5MM TB 7.5MM TB (7.5MMLS) 10MM TB (10MMLS) P P0 P2 P1 F* Δh W W1 H1 H2 H0 I I0 φD0 W0 t W2 L Dimensions MM (inch) 12.7 ± 1.0 (0.5 ± 0.0394) 12.7 ± 0.2 (0.5 ± 0.008) 6.35 ± 1.3 (.025 ± 0.051) 3.85 ± 0.5 (0.152 ± 0.020) 5.0 ± 0.8 (0.197 ± 0.0315) 0 ± 2.0 (0 ± 0.0787) 18.0 ± 0.5 (0.709 ± 0.020) 9.0 ± 0.5 (0.354 ± 0.020) 20.0 ± 0.75 (0.787 ± 0.030) 18.0 ± 0.5 (0.709 ± 0.020) 16.0 ± 0.5 (0.630 ± 0.020) 2.0 max. (0.079 max.) 7.0 max. (0.276 max.) 4.0 ± 0.2 (0.157 ± 0.008) 12.5 min. (0.492 min.) 0.7 ± 0.2 (0.028 ± 0.008) 3.0 max. (0.118 max.) 11.0 max. (0.433 max.) t Ammo Box Packing TB (Tape Box) A B C ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com