Pulse Jack Shielded Drum Core Inductor PA4330.XXXNLT Series Height: 1.0mm Max Electronics Footprint: 2.2mm x 1.8mm Max Current Rating: up to 3.1A Inductance Range: 0.47uH to 2.2uH Shielded magnetic circuit reduces leakage flux, Fe base metal core enables high saturation and metalized core termination results in excellent shock resistance Electrical Specifications @ 25°C — Operating Temperature -40°C to 125°C DC RESISTANCE MAX. TYP. INDUCTANCE 1MHz, 1V RATED CURRENT MIN. SELF-RESONANT FREQUENCY uH +/-20% A MHz mΩ mΩ PA4330.471NLT 0.47 3.1 102 49 PA4330.681NLT 0.68 2.8 77 PA4330.102NLT 1 2.35 PA4330.222NLT 2.2 1.7 PART NUMBER HEATING CURRENT SATURATION CURRENT (20°C) 20°C Rise 40°C Rise A A A 41 3.8 2.7 3.1 65 57 3.5 2.5 2.8 70 90 75 3.35 2.05 2.35 39 170 142 1.8 1.45 1.7 NOTES: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. 2. The rated current as listed is either the saturation current (20°C) or the heating current (40°C Rise) depending on which value is lower. 4. The heating current is the DC current required to raise the component temperature by approximately 20°C or 40°C. Take note that the components’ performance varies depending on the system conditions. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 3. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the component in the specified 5. Maximum voltage across terminals to be limited to <25Vdc. Mechanical Schematic PA43330.XXXNLT B C D A G E H F J E H SUGGESTED PAD LAYOUT FINAL OUTLINE Part Number A (max) B (max) C D E F G H J PA4330.XXXNLT 2.2 MAX 1.8 MAX 1.0 MAX (1.5) (0.6) (0.8) (1.70) (0.7) (0.7) 1 pulseelectronics.com P749.B (05/15) Pulse Jack Shielded Drum Core Inductor PA4330.XXXNLT Series Electronics TAPE & REEL INFO E T P2 B ØD0 P0 F A W K0 N P1 G SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TYPE PA4330.XXXNLT TAPE SIZE (mm) QTY A B G N E F D0 P P0 P2 W T K0 PCS/REEL Ø178 14.4 8.4 58 1.75 3.5 1.5 4 4 2 8 0.25 1.2 2000 For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Zeppelinstrasse 15 71083 Herrenberg Germany Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Aerospace Technology Bldg. Super Ocean Finance Ctr. #03-02 Zhongyuan Road 10th Kejinan Road 2067 Yan An Road West PM Industrial Bldg. Zhongli City High-Tech Zone Shanghai 200336 Singapore 368363 Taoyuan County 320 Nanshan District China Taiwan R. O. C. Shenzhen, PR China 518057 Tel: 886 3 4356768 Tel: 858 674 8100 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 86 21 62787060 Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Fax: 858 674 8262 Fax: 49 7032 7806 12 Fax: 86 755 33966700 Fax: 86 2162786973 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2015. Pulse Electronics, Inc. All rights reserved. 2 pulseelectronics.com P749.B (05/15)