Data Sheet

RL801
THRU
RL807
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Ampere
FEATURES
*
*
*
*
*
Low leakage
Low forward voltage drop
High current capability
High surge capability
High reliability
TO-220A
MECHANICAL DATA
*
*
*
*
*
.413 ( 10.5)
.108
.374 ( 9.5 )
( 2.75)
.153 ( 3.9 )
.187 ( 4.7 )
.148 ( 3.8 )
.146 ( 3.7 )
.053 ( 1.3 )
Case: TO-220A molded plastic
Epoxy: Device has UL flammability classification 94V-O
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 2.24 grams
.047 ( 1.2 )
.270 ( 6.9 )
.230 ( 5.8 )
.610 ( 15.5)
.583 ( 14.8)
.04 MAX.
( 1.0 )
1
PIN
2
.157
( 4.0 )
.583 (14.8)
.051
( 1.3 )
.531 (13.5)
.035 (0.9 )
.028 ( 0.7 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
.102 ( 2.6 )
Single phase, half wave, 60 Hz, resistive or inductive load.
.091 ( 2.3 )
.020 ( 0.5 )
.012 ( 0.3 )
.126
( 3.2 )
PIN 1
For capacitive load, derate current by 20%.
HEATSINK
PIN 2
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
SYMBOL
RL801
RL802
RL803
RL804
RL805
RL806
RL807
UNITS
Maximum Recurrent Peak Reverse Voltage
RATINGS
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
VDC
50
100
200
400
600
800
1000
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T C = 100 o C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
IO
8.0
Amps
I FSM
125
Amps
R q JC
3.6
R q JA
25
CJ
40
T J, T STG
-55 to + 150
0
C/ W
pF
0
C
ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted)
O
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 8.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@T A = 25 o C
@T A = 100 o C
SYMBOL
VF
IR
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
4. Suffix "R" for Reverse Polarity.
RL801
RL802
RL803
RL804
1.1
10
100
RL805
RL806
RL807
UNITS
Volts
mAmps
2006-12
RATING AND CHARACTERISTICS CURVES ( RL801 THRU RL807 )
INSTANTANEOUS FORWARD CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
10
8
6
4
Single Phase Half Wave
60 Hz Inductive or
Resistive Load
2
0
0
50
100
150
40
20
10
4
1.0
0.4
0.1
O
200
CT, JUNCTION CAPACITANCE, (pF)
1000
TA = 100 OC
100
10
TA = 25 C
O
1.0
0.1
0
20
40
60
80
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
100
120
FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
100
60
40
20
10
6
4
2
0
140
TJ = 25 OC
0.1 0.2
0.4
1.0
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
2
8.3mS Single Half Sine-Wave
JEDEC Method
125
100
75
50
25
2
10
20
40
100
FIG.4 TYPICAL JUNCTION CAPACITANCE
150
0
1
4
REVERSE VOLTAGE, (V)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
PEAK FORWARD SURGE CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (mA)
CASE TEMPERATURE, ( C)
TA = 25 OC
Pulse Width = 300µS
1% Duty Cycle
5
10
20
50
100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.