HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING SHRINK RATIO 4:1 Features/Applications Specially designed for the protection of wires, terminals and other components against environmental damage. The semi-rigid composition makes it more abrasion range of component diameters. With its thicker liner, it forms an effective barrier Operating temperature: -55°C to +125°C Minimum shrink temperature: 110°C Full recovery temperature: 135°C Meets: SAE-AMS-DTL-23053/4, 600V Standard colors: Black and clear RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 >16 MPa Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 >13 MPa Elongation at Break ASTM D 2671 >400% Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 >300% Longitudinal Shrinkage Heat Shock UL 224 0 ± 5% 250°C, 4 hrs. No cracking, no dropping Cold Bend ( -30°C, 1 hr.) ASTM D 2671 No cracking Breakdown Voltage ASTM D 2671 AC 2500V (min.) Volume Resistance ASTM D 2671 Flammability Copper Corrosion (158°C, 168 hrs.) >10 14 Ω.cm - Self extinguish in 30 seconds UL 224 Pass ASTM E 28 110°C ± 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions After Recovered (mm) As Supplied (mm) Size (mm) Standard Packaging Cut to Length Pcs. (QB)* Qty per bag 6” 48” Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Adhesive Thickness (nom.) 6/1.27 6 1.27 1.30 0.56 20 5 8/1.65 8 1.65 1.52 0.76 16 5 12/2.41 12 2.41 1.91 1.02 14 5 18/4.45 18 4.45 2.41 1.37 12 5 Notes: 1. * See Part Number Guide for standard packaging codes. 2. Cross Reference Guide available. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. www.Qualtekusa.com