HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING , HOT MELT ADHESIVE-LINED SHRINK RATIO 6:1 Features/Applications Ideal for applications of extremely different diameter between cables, connectors and terminations, complete environmental protection and is resistant to impact and abrasion. Operating temperature: -55°C to +110°C Minimum shrink temperature: 120°C Full recovery temperature: 120°C Standard color: Black RoHS Compliant Very high shrink ratio Resistant to UV radiation High electrical insulation Superior mechanical property Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 >14 MPa Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 > 12 MPa UL 224 0 ± 10% Elongation at Break ASTM D 2671 > 400% Elongation at Break After Aging (50°C, 168 hrs.) ASTM D 2671 > 300% Dielectric Strength IEC 243 > 18kV / mm Volume Resistance IEC 93 >13 Longitudinal Shrinkage Copper Stability ASTM D 2671 Heat Shock (225°C, 4hrs.) ASTM D 2671 Property Softening Point Peel Strength (PE) Resistance to Fungus and Decay Ω.cm Non-corrosive Test Method Water Absorption 14 Typical Data ISO 62 < 0.2% ASTM D E28 85°C ± 5°C DIN 30672 4N / cm ISO 846 Pass Product Dimensions After Recovered (mm) As Supplied (mm) Size (mm) Inside Diameter (min.) Inside Diameter (max.) Standard Packaging Wall Thickness (min.) Tubing Shape Cut to Length Pcs. *(QB) Qty per bag (48” pcs.) 19/3.2 19.0 3.2 3.2 Round 20 33/5.5 33.0 5.5 3.4 Round 20 44.4/7.4 44.4 7.4 3.6 Round 15 50.8/8.3 50.8 8.3 4.3 Round 15 69.8/11.7 69.8 11.7 4.8 Round 15 88.9/17.1 88.9 17.1 4.8 Round 15 119.4/22.9 119.4 22.9 4.8 Round 10 235/40 235.0 40.0 4.8 Round 10 Notes: 1. * See page 13 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com