REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C DESCRIPTION DATE 06-01-06 10-12-09 RoHS Compliancy Updated Specifications APPROVED DP LY MECHANICAL DIMENSIONS: 2.65 FUSE HOLDER ELECTRICAL CHARACTERISTICS: 1.15 1.063 ± 0.003 R0.04MAX 1.32MAX 1.059MAX 0.28 1.417MAX 2.6 ± 0.003 PANEL CUTOUT ELECTRICAL SCHEMATIC: 1-1. VOLTAGE RATING.....................................................115/250VAC 1-2. CURRENT RATING A. @ 115/250VAC (UL, CSA) ...............6 A RMS MAX B. @ 250VAC (SEMKO) .........................4 A RMS MAX 1-3. OPERATING FREQUENCY .........................................48-440Hz 1-4. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND ............................2000 VDC B. LINE TO LINE ......................................2000 VDC 1-5. MINIMUM INSULATION RESISTANCE: @ 500VDC ONE MINUTE A. LINE & NEUTRAL TO GROUND .....10M OHM B. LINE & NEUTRAL ................................10M OHM 1-6. SAFETY: 1-7. SINGLE 5x20mm FUSEHOLDER 1-8. SNAP-IN PANEL THICKNESS: .04IN~.07IN (1.0mm~1.8mm) 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. PPC DIVISION 761-18/002 Part Number: Description: MULTI-FUNCTION MODULE UNIT: in REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 S.CHEN 07-27-99 07-27-99 JJH / 07-27-99