REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION DATE 06-01-06 RoHS Compliancy APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING.....................................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC .........................................15 A RMS MAX B. @ 250 VAC .........................................5 A RMS MAX 1-3. OPERATING FREQUENCY................................................... 50-60Hz 1-4. LEAKAGE CURRENT EACH LINE TO GROUND A. AT 115VAC 60Hz............................................ 2uA MAX. B. AT 250VAC 50Hz............................................. 5uA MAX. 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSULATION RESISTANCE: @ 500VDC A. LINE & NEUTRAL TO GROUND..............10M OHM B. LINE TO NEUTRAL......................................10M OHM 1-7. VOLTAGE SELECTOR CARD: 100, 120, 220 OR 240 VAC INPUT VOLTAGE 1-8. RoHS COMPLIANT 1.06 PHYSICAL DIMENSIONS: R0.04 2.60 1.17 PANEL CUTOUT 2.68 1.23 1.52 ELECTRICAL SCHEMATIC: NOTES: 1. JUMPER REQUIRED IF ONLY SPST POWER SWITCH IS USED. 2. JUMPER REQUIRED IF NO INPUT FILTER IS USED. PLASTIC CASE SNAP-IN PANEL THICKNESS: 0.04~0.063IN PANEL THICKNESS: 0.06~0.09IN FLAMMABILITY CLASS UL94V-0 CONTROLLED Qualtek Electronics Corp. Dim range (mm) Tolerance +/(mm) Part Number: 0-1 0.15 Description: 1-6 0.20 6-18 0.30 18-50 0.50 PPC DIVISION 760-16/001 MULTI-FUNCTION MODULE UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 09-15-04 09-15-04 JJH / 09-15-04