INDEX General Information Page HEAT SHRINK PRODUCTS SELECTION GUIDE 1-2 HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE 3 CABLE TIES CROSS REFERENCE GUIDE 4-8 HEAT SHRINK PRODUCTS INFORMATION 9 HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY 10 TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS 11 HEAT SHRINK PRODUCTS PART NUMBER GUIDE 12 Product Type Heat Shrink Thin Wall Tubing Page Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 13 Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 14 Q2-F3X HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 15 Q2-F4X HIGH SHRINK RATIO, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 4:1 SHRINK RATIO 16 Q2-F2XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 17 Q2-F3XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 17 Q2-HF LOW SMOKE, HALOGEN FREE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 18 Q2-LS VERY LOW SHRINK TEMPERATURE, FLEXIBLE, HALOGEN FREE, POLYOLEFIN TUBING, 2:1 SHRINK RATIO 19 Q2-R SEMI-RIGID, MULTI-PURPOSE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 20 Q2-Z ENVIRONMENT FRIENDLY, FLEXIBLE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 21 Q2-3X FLEXIBLE, THIN WALL, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 22 Q-150K 150°C, BLACK, MODIFIED THIN WALL, FLEXIBLE PVDF TUBING, 2:1 SHRINK RATIO 23 Q-175K 175°C, CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING, 2:1 SHRINK RATIO 24 Q-200E 200°C, VERY FLEXIBLE, MODIFIED FLUOROELASTOMER TUBING (Viton), 2:1 SHRINK RATIO 25 Q-PTFE PTFE HEAT SHRINKABLE TUBING 26 Heat Shrink Medium / Heavy Wall Tubing Page Q5-2X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 2:1 SHRINK RATIO 27 Q5-3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 28 Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 29 Q5-F3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 30 Q5-F4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 31 Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING, 4:1 SHRINK RATIO 32 Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 33 QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING, HOT MELT ADHESIVE-LINED, 6:1 SHRINK RATIO 34 QBTM 24kV BUS BAR INSULATION TUBING, HALOGEN FREE 35 QBTH 36kV BUS BAR INSULATION TUBING, HALOGEN FREE 35 End Caps QSEC Page HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Mini Spools, Q Boxes, Qkits & Refill Bags 36 Page MINI SPOOLS & Q BOXES 37 QKITS & REFILL BAGS 37-38 www.Qualtekusa.com INDEX Cable Ties & Accessories Page Cable Tie Information 39 11 Series MARKER CABLE TIES , GENERAL PURPOSE 40 12 Series DOUBLE LOOP CABLE TIES, GENERAL PURPOSE 41 13 Series NYLON, BEADED CABLE TIES, GENERAL PURPOSE 42 14 Series NYLON, DOUBLE LOOP BEADED CABLE TIES , GENERAL PURPOSE, 43 15 Series CABLE TIES RUBBER ADHESIVE MOUNTING BASE, GENERAL PURPOSE 44 16 Series NYLON, CABLE TIES SCREW MOUNT BASE, GENERAL PURPOSE 45 17 Series STANDARD NYLON CABLE TIES, GENERAL PURPOSE 18 Series NYLON, MOUNTING HOLE CABLE TIES, GENERAL PURPOSE 48 19 Series NYLON, RELEASABLE PAWL TYPE CABLE TIES, GENERAL PURPOSE 49 20 Series NYLON, RELEASABLE TRIGGER TYPE CABLE TIES, GENERAL PURPOSE 50 21 Series NYLON, PUSH MOUNT CABLE TIES, GENERAL PURPOSE 51 22 Series STAINLESS STEEL CABLE TIES, SELF-LOCKING BALL LOCK HEAD DESIGN 52 www.Qualtekusa.com 46-47 HEAT SHRINK PRODUCTS SELECTION GUIDE HEAT SHRINK THIN WALL TUBING Part Number Material Product Type Shrink Ratio Operating Temp. & Voltage Rating Min. Shrink Temp. Full Recovery Temp. Q2-CB Polyolefin Ultra Thin Wall 2:1 -55°C to +125°C, 300V 70°C 100°C Q2-F Polyolefin Thin Wall 2:1 -55°C to +135°C, 600V 70°C 100°C Q2-F3X Polyolefin Thin Wall 3:1 -55°C to +135°C, 600V 70°C 100°C Q2-F4X Polyolefin Thin Wall 4:1 -55°C to +135°C, 600V 70°C 100°C Q2-F2XYG Q2-F3XYG Polyolefin Thin Wall 2:1, 3:1 -55°C to +135°C, 600V 70°C 100°C Q2-HF Polyolefin Thin Wall 2:1 -55°C to +105°C, 600V 70°C 100°C Q2-LS Polyolefin Thin Wall 2:1 -55°C to +125°C, 600V 65°C 95°C Q2-R Polyolefin Semi-Rigid Thin Wall 2:1 -55°C to +135°C, 600V 70°C 130°C Q2-Z Polyolefin Thin Wall 2:1 -55°C to +125°C, 600V 70°C 100°C Q2-3X Polyolefin Thin Wall 3:1 -55°C to +125°C, 600V 70°C 100°C Q-150K Modified PVDF Flexible Thin Wall 2:1 -55°C to +150°C, 600V 135°C 150°C Q-175K PVDF Semi-Rigid Thin Wall 2:1 -55°C to +175°C, 600V - 175°C Q-200E Modified Fluoroelastomer Viton Very Flexible Thin Wall 2:1 -55°C to +200°C, 600V 150°C 175°C QPTFE Modified PTFE Semi-Rigid Thin Wall 2:1 -65°C to +260°C, 600V - 350°C HEAT SHRINK MEDIUM / HEAVY WALL TUBING - ADHESIVE LINED Part Number Material Product Type Shrink Ratio Operating Temp. & Voltage Rating Min. Shrink Temp. Full Recovery Temp. Q5-2X Polyolefin Dual Wall 2:1 -45°C to +125°C, 600V 100°C 125°C Q5-3X Polyolefin Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C Q5-4X Polyolefin Dual Wall 4:1 -55°C to +125°C, 600V 80°C 110°C Q5-F3X Polyolefin Dual Wall 3:1 -55°C to +125°C, 600V 70°C 110°C Q5-F4X Polyolefin Dual Wall 4:1 -55°C to +125°C, 600V 70°C 110°C Q5-4XR Polyolefin Semi-Rigid Dual Wall 4:1 -55°C to +125°C, 600V 110°C 135°C Q5-3XM Polyolefin Heavy Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C QRA-6X Polyolefin Heavy Dual Wall 6:1 -55°C to +110°C, 600V 120°C 120°C QBTM Non-Halogen QBTH Polymer - -55°C to +105°C, 24-36kV 120°C - Shrink Ratio Operating Temp. & Voltage Rating Min. Shrink Temp. Full Recovery Temp. - -55°C to +110°C, 1000V 120°C - Bus Bar END CAPS Part Number QSEC Material Polyolefin Product Type Cable End Caps SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS 1 www.Qualtekusa.com General Description Agency Certification Military Standard Page SAE-AMS-DTL No PBB’s, PBBE’s, PBBO’s, Low Cadmium and Lead, VW-1 mm Sizes: 1.0 to 10mm, Inch Sizes: 3/64” to 1/2” E236137 242540 - 13 No PBB’s, PBBE’s, PBBO’s, Very Flexible, Highly Flame-Retardant, VW-1 mm Sizes: 1.2 to 151mm, Inch Sizes: 3/64” to 6” E236137 242540 23053/5 Class 1 & 3 14 No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1 mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137 242540 23053/5 Class 1 & 3 15 No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant mm Sizes: 19.1 to 115mm, Inch Sizes: 3/4” to 4 1/2” E236137 242540 23053/5 Class 1 & 3 16 Yellow-Green Striped, Flexible, Flame-Retardant Tubing, VW-1 2:1 - mm Sizes: 1.2 to 101.6mm, Inch Sizes: 3/64” to 4”, 3:1 - mm Sizes: 1.6 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137 242540 23053/5 Class 1 & 3 17 Halogen Free Polyolefin Tubing, Low Smoke mm Sizes: 1.0 to 150mm 242540 - 18 Very Flexible, Low Shrink Temperature, Halogen Free Polyolefin Tubing mm Sizes: 1.6 to 50.8mm, Inch Sizes: 1/16” to 2” 242540 - 19 Semi-Rigid, Flame-Retardant Tubing, Resistant to Common Chemicals and Solvents, Self-Extinguish in 30 Seconds mm Sizes: 1.2 to 25.4mm, Inch Sizes: 3/64” to 1” E236137 242540 23053/6 Class 1 & 2 20 Environment Friendly, Flexible, Flame-Retardant, VW-1 mm Sizes: 1.0 to 150mm, Inch Sizes: 3/64” to 6” E236137 242540 - 21 Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1 mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137 242540 - 22 Flexible, High Temperature, Chemical Resistant, Polyvinylidene Fluoride(PVDF) Kynar®, VW-1 mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” VW-1 E245010 23053/18 23 Clear, High Temperature, Chemical Resistant, Polyvinylidene Fluoride (PVDF) Kynar®, VW-1 mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” VW-1 E245010 23053/18 24 VW-1 E245010 23053/13 25 23053/12 26 Military Standard Page Flexible, Elastic, High Temperature, Solvent Resistant, Viton®, VW-1 mm Sizes: 3.2-50.8mm, Inch Sizes: 1/8” to 2” Polytetrafluoroethylene Tubing, Self-Extinguish Sizes: AWG 30 to AWG 0 - General Description Agency Certification SAE-AMS-DTL Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds mm Sizes: 3.2 to 38.1mm, Inch Sizes: 1/8” to 1 1/2” E236137 242540 23053/4 27 Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds mm Sizes: 3.0 to 50.0mm, Inch Sizes: 1/8” to 2” E236137 242540 23053/4 28 Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds mm Sizes: 4.0 to 52.0mm, Inch Sizes: 3/16” to 2” E236137 242540 23053/4 29 Adhesive-Lined, Flexible, Polyolefin Tubing, Self-Extinguish in 30 Seconds mm Sizes: 3.0 to 40mm, Inch Sizes: 1/8” to 1 1/2” E236137 242540 23053/4 30 High Shrink Ratio, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds mm Sizes: 4 to 52mm, Inch Sizes: 3/16” to 2” E236137 242540 23053/4 31 High Shrink Ratio, Semi-Rigid, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds mm Sizes: 6.0 to 18.0mm, Inch Sizes: 0.236” to 0.708” - 23053/4 32 Heavy Dual Wall, High Shrink Ratio, Adhesive-Lined, Flame-Retardant, Self-Extinguish in 30 Seconds mm Sizes: 19.0 to 100.0mm, Inch Sizes: 3/4” to 4” - - 33 Very High Shrink Ratio, Heavy Dual Wall, Hot-Melt, Adhesive-Lined mm Sizes: 19.0 to 235mm - - 34 Specially formulated radiation cross-linked halogen free compounds. High resistance to tracking and arcing. UV and weather resistant mm Sizes: 15.0 to 235mm - - 35 General Description Spiral Hot-Melt Adhesive Coated End Cap for Protecting Cable Ends from the Environmental Effects. mm Sizes: 12 to 200mm Page 36 37-38 www.Qualtekusa.com 2 HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE Qualtek PN Page Raychem Sumitomo Canusa 3M Alpha Insul Tab LG Q2-CB 13 VERSAFIT V4 F3(Z) Deray ITW Q2-F 14 RNF-100, VERSAFIT B2, B2(Z), F, F2, F2(Z) CPX100, CPX-876 FP-301 FIT 221, FIT 221V HS-101 GSHS-1635F Q2-F3X 15 RNF-3000 B2(3X), F2(3X),A2(3X) CPX300, Deray-I 3000 SFTW-203 FIT 321V HS101 SR GSHS-3635 Q2-F4X 16 RP-4800 W3B2(4X) Q2-F2XYG 17 DCPT 2:1 B2(Y/G) Q2-F3XYG 17 DCPT 3:1 Q2-HF 18 ZHTM Q2-LS 19 LSTT Q2-R 20 CRN, RT-3 B8 CHM 140 SR350 Q2-Z 21 VERSAFIT V2 F2(Z) Deray H CP-221 Q2-3X 22 VERSAFIT 3X F2(3X), B2(3X) Q-150K 23 RT 375, RNF-150 K2 Q-175K 24 KYNAR, RW-175 K Q-200E 25 VITON FE3 Q-PTFE 26 TFE Deray PTFE GSHS-1625G FIT 421 Deray IGY, CPX-201 SFTW-202GYS Deray IGY, CPX-201 SUMITUBE-NH HS-101(3X) Deray LSB GSHS-1625G FIT 221VC CKN-175, Deray KY 175 KYNAR FIT 350 HSK-600 Deray VT220 VITON FIT 650 HSN-VTN EPS-200 FIT 750 HS-101-MV 2:1 GSHS-1625W EPS-300 FIT 321 HS-101-MW 3:1 GSHS-3635W HS-101-MW 4:1 GSHS-4635W HS-101-MW 3:1 GSHS-3635W HS-101-MW4:1 GSHS-4635W Deray V25 QDR-TW - DR-25-TW Deray V25TW Q5-2X 27 TAT-125 02B2 Q5-3X 28 DWP-125 W3B2 Q5-4X 29 ATUM 4:1 W3B2 Q5-F3X 30 ATUM 3:1 W3B2(4X) Q5-F4X 31 ATUM 4:1 Q5-4XR 32 ES-2000 Q5-3XM 33 SST Q5-2000 - AP-2000 QRA2 - MWTM CFM QRA3 - WCSM, SST CFW QFRA3 - BSTSFR, SSTFR FCFW QRA-6X 34 QBTM 35 BPTM CBTM QBTH 35 BBIT CBTH CPA 300 EPS-400 Deray IAKT 3:1 EPS-300 Deray IAKT 4:1 EPS-400 Deray Splicemelt EPS-400, SMS FIT 421 ITCSN, MDT FIT 700 FIT 321 GSHS-1650F GSHS-1675 GSHS-4635WS O2 GSHS-2690NW IMCSN, MDT LG-PMWT FIT 700 LG-PHWT HDT, ITCSF CFHR FIT 321 BBI QRS - QSTV - TCS2 CFTV QAT - HVTM CNTT QBM - BBIT CBTH BBI QBT - BPTM CBTM BBI QSCT - QSC-100 - PLA CCT CTV SCR-100 SSC, ESC CSCR CCAP, CEC ICEC www.Qualtekusa.com LG-CATV LG-BBVH HSCT Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. 3 HS-101-SR THV-150 BLACK DR-25 SA2 FIT 295 HS101SR - 36 GSHS-1635Y/G CZT-200 QDR QSEC FIT 260 FIT CAP CABLE TIES CROSS REFERENCE GUIDE Qualtek PN Page 11-M100B-C 40 11-M100N-C 40 Catamount T&B L-4-18ID-9-C Thomas & Betts Panduit TY551MX PLM1M-C0 TY551M PL1M-C Hellermann Tyton Ideal Ind. Avery Dennison Richco IT18R0C2 IT1MID-C IT18R9C2 11-M110B-C 40 TY553MX PLF1M-C0 IT18FL0C2 11-M110N-C 40 TY153M, TY553M PLF1M-C IT18FL9C2 08417 WIT-F1-18R-M 10687 WIT-F2-18R-M 11-M200B-C 40 TY5512MX PLM2M-M0 10426 11-M200N-C 40 TY5512M PL2M-C 10427 11-S190B-C 40 11-S190N-C 40 12-S200B-C 41 12-S200N-C 41 12-S300B-C 41 12-S300N-C 41 13-100B-C 42 BT-4-01-NT 13-100N-C 42 BT-4-01-BK 13-150B-C 42 BT-6-01-NT 13-150N-C 42 BT-6-01-BK 13-200B-C 42 BT-8-01-NT 13-200N-C 42 BT-8-01-BK 15-1919B-C 44 MPNY-750-0-C 15-1919N-C 44 MPNY-750-9-C 15-2525B-C 44 MPNY-1000-0- C 15-2525N-C 44 MPNY-1000-9-C 15-4040B-C 44 15-4040N-C 44 16-1509B-C 45 16-1509N-C 45 16-1712N-C 45 16-2216B-C 45 16-2216N-C 45 16-2516N-C 45 L-7-50ID-9-C TY546MX PLM2S-C0 TY546M PLM2S-C 3M IT2SID-C T50RDH0C2 TB-50RLDH T50RDH9C2 T50IDH0C2 10432 TB-12-50RLDH T50IDH9C2 10430 IT750MP-C0 TC5344A ABMM-A-C IT750MP-C 10029 IT1000MP-C0 TC5345A ABM2S-A-C, ABM112-A-C TC150X150A-L ABM3H-A-L 10030, 08463 IT1000MP-C FTH-5A1-RT-UVB, FTH-5A1-01-UVB CTB75X75BKA-C FTH-5A1-RT, FTH-5A1-01 CTB75X75NTA-C FTH-7A1-RT-UVB, FTH-7A1-01-UVB CTB1X1BKA-C FTH-7A1-RT, FTH-7A1-01 CTB1X1NTA-C FTH-4040B-C FTH-8-01 IT1SMB-C0 SMNY-000-9-D IT1SMB-C 10044 10045 IT2SMB-C0 SMNY-002-9-D IT2SMB-C 10046 17-EHD1220B-L 47 L-48-175-0-L TY54513MX PLT13H-Q0 IT14H-L0 T150XL0X2 CT48BK175-L 17-EHD1220N-L 47 L-48-175-9-L TY54513M PLT13H-Q IT14H-L T150XL9X2 CT48NT175-L 17-EHD400B-L 47 17-EHD400N-C 47 17-EHD400N-L 47 17-EHD450B-L 47 PLT5H-L0 17-EHD450N-L 47 PLT5H-L 17-EHD550B-L 47 PLT6H-L0 T150M0X2 17-EHD550N-L 47 PLT6H-L T150M9X2 17-EHD610B-L 47 17-EHD610N-C 47 17-EHD610N-L 47 17-EHD750B-L 47 17-EHD750N-L 47 17-EHD780B-L 47 PLT8H-L0 17-EHD780N-L 47 PLT8H-L 17-EHD810B-L 47 17-EHD810N-C 47 17-EHD810N-L 47 T150R0X2 WIT-175S-C T150R9X2 L-24-175-0-L CT24BK175-L WIT-175R-C L-24-175-9-L CT24NT175-L IT7H-L0 IT7H-L T150L0X2 WIT-175L-C T150L9X2 17-EHD920B-L 47 L-36-175-0-L TY53510MX T150LL0X2 CT36BK175-L 17-EHD920N-L 47 L-36-175-9-L TY53510M T150LL9X2 CT36NT175-L 17-HD200B-C 46 L-8-120-0-C PLT2H-L0 CT8BK120-L Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 4 CABLE TIES CROSS REFERENCE GUIDE Catamount T&B Thomas & Betts Page 17-HD200N-C 46 17-HD220B-C 46 TY5272MX 17-HD220N-C 46 TY5272M 17-HD250B-C 46 17-HD250N-C 46 17-HD300B-C 46 L-100-120-0-C 17-HD300N-C 46 L-100-120-9-C 17-HD350B-C 46 17-HD350N-C 46 17-HD365B-C 46 L-14-120-0-C 17-HD365N-C 46 L-14-120-9-C 17-HD380B-C 46 PLT4H-L0 IT4LH-L0 T120R0K2 17-HD380N-C 46 PLT4H-L IT4LH-L T120R9K2 17-HD450B-C 46 17-HD450B-L 46 17-HD450N-C 46 17-HD450N-L 46 17-HD540B-L 46 17-HD540N-C 46 17-HD540N-L 46 L-8-120-9-C Panduit Ideal Ind. Hellermann Tyton Qualtek PN Avery Dennison PLT2H-L 3M CT8NT120-L T120S0K2 T120S9K2 WIT-120S-C PLT2.5H-L0 PLT2.5H-L PLT3H-L0 T120I0K2 PLT3H-L T120I9K2 TY527MX TY527M 10039 10038 TY5275MX IT5LH-L0 TY5275M IT5LH-L CT15BK120-C WIT-120R-C CT15NT120-C L-18-120-9-L L-18-120-9-L 10608 WIT-120L-C 10606 17-HD550B-L 46 PLT6LH-L0 10620 17-HD550N-L 46 PLT6LH-L 10618 17-HD750B-C Richco TY529MX, TY5277MX 46 17-HD750B-L 46 17-HD750N-C 46 17-HD750N-L 46 17-HSD1000N-L 47 T250XL9X2, T250XL0X2 17-HSD530B-L 47 T250R0X2 17-HSD530N-L 47 17-HSD650B-L 47 17-HSD650N-L 47 L-28-120-0-L PLT9LH-L0 T120L0K2 PLT9LH-L T120L9K2 TY529M, TY5277M L-28-120-9-L T250R9X2 IT6EH-C0 T250M0X2 T250M9X2 17-I140B-C 46 L-5-30-0-C TY524MX PLT1.5I-C0 CT6BK40-C 17-I140B-M 46 L-5-30-0-M TY24MX PLT1.5I-M0 CT6BK40-M 17-I140N-C 46 L-5-30-9-C TY524M PLT1.5I-C CT6NT40-C 17-I140N-M 46 L-5-30-9-M TY24M PLT1.5I-M 17-I150B-C 46 IT1_5I-C0 17-I150B-M 46 IT1_5I-M0 17-I150N-C 46 IT1_5I-C 17-I150N-M 46 IT1_5I-M 17-I200B-C 46 L-8-40-0-C TY5242MX PLT21-C0 T40R0C2 08386 17-I200B-M 46 L-8-40-0-M TY242MX PLT21-M0 T40R0M4 08380 17-I200N-C 46 L-8-40-9-C TY5242M PLT21-C T40R9C2 08385 WIT-40L-C, WIT-40XL-C 17-I200N-M 46 L-8-40-9-M TY242M PLT21M T40R9M4 08377 WIT-40L-M, WIT-40XL-M 17-I250B-C 46 PLT2.5I-C0 CT8BK40-C 17-I250B-M 46 PLT2.5I-M0 CT8BK40-M 17-I250N-C 46 PLT2.5I-C CT8NT40-C 17-I250N-M 46 PLT2.5I-M 17-I280B-C 46 TY526MX WIT-40VL-UVB-C 17-I280B-M 46 TY26MX WIT-40VL-UVB-M 17-I280N-C 46 TY526M WIT-40VL-C 17-I280N-M 46 TY26M 17-I300B-C 46 L-11-40-0-C PLT31-C0 17-I300B-M 46 L-11-40-0-M PLT31-M0 CT6NT40-M WIT-40R-C WIT-40R-M CT8NT40-M WIT-40VL-M IT31-C0 T40I0C2 T40I0M4 Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. 5 www.Qualtekusa.com CABLE TIES CROSS REFERENCE GUIDE Qualtek PN Page Catamount T&B Thomas & Betts Panduit Hellermann Tyton Ideal Ind. 17-I300N-C 46 L-11-40-9-C PLT31-C 17-I300N-M 46 L-11-40-9-M PLT31-M T40I9M4 17-I370B-C 46 L-14-40-0-C PLT41-C0 T40L0C2 TY5244MX IT31-C Avery Dennison Richco 3M T40I9C2 17-I370B-M 46 L-14-40-0-M TY244MX PLT41-M0 M40L0M4 17-I370N-C 46 L-14-40-9-C TY5244M PLT41-C T40L9C2 17-I370N-M 46 L-14-40-9-M TY244M PLT41-M T40L9M4 17-M100B-C 46 L-4-18-0-C TY523MX PLT1M-C0 IT1M-C0 T18R0C2 08435 CT4BK18-C 17-M100B-M 46 L-4-18-0-M TY23MX PLT1M-M0 IT1M-M0 T18R0M4 08433 CT4BK18-M 17-M100N-C 46 L-4-18-9-C TY523M PLT1M-C IT1M-C T18R9C2 08434 CT4NT18-C 17-M100N-M 46 L-4-18-9-M TY23M PLT1M-M IT1M-M T18R9M4 08432 17-M120B-C 46 WIT-18R-UVB-C 17-M120B-M 46 WIT-18R-UVB-M 17-M120N-C 46 WIT-18R-C 17-M120N-M 46 17-M150B-C 46 PLT1.5M-C0 T18I0C2 WIT-18L-UVB-C 17-M150B-M 46 PLT1.5M-M0 T18I0M4 WIT-18L-UVB-M 17-M150N-C 46 PLT1.5M-C T18I9C2 WIT-18L-C 17-M150N-M 46 PLT1.5M-M T18I9M4 WIT-18L-M 17-M160B-C 46 L-6-18-0-C 17-M160B-M 46 L-6-18-0-M 17-M160N-C 46 L-6-18-9-C 17-M160N-M 46 L-6-18-9-M 17-M200B-C 46 L-8-18-0-C TY5232MX, TY52315MX PLT2M-C0 IT2M-C0 T18L0C2 WIT-18V-UVB-C CT8BK18-C 17-M200B-M 46 L-8-18-0-M TY232MX, TYB2315MX PLT2M-M0 IT2M-M0 T18L0M4 WIT-18V-UVB-M CT8BK18-M 17-M200N-C 46 L-8-18-9-C TY5232M, TY52315M PLT2M-C IT2M-C T18L9C2 WIT-18V-C CT8NT18-C 17-M200N-M 46 L-8-18-9-M TY5232M, TYB2315M PLT2M-M IT2M-M T18L9M4 WIT-18V-M CT8NT18-M 17-M80B-C 46 PLT.7M-C0 T18S0C2 WIT-18SF-UVB-C 17-M80B-M 46 PLT.7M-M0 T18S0M4 WIT-18SF-UVB-M 17-M80N-C 46 PLT.7M-C T18S9C2 WIT-18SF-C 17-M80N-M 46 PLT.7M-M T18S9M4 WIT-18SF-M 17-S120B-C 46 PLT1S-C0 17-S120B-M 46 PLT1S-M0 17-S120N-C 46 PLT1S-C 17-S120N-M 46 17-S160B-C 46 L-5-50-0-C PLT1.5S-C0 T50S0C2 17-S160B-M 46 L-5-50-0-M PLT1.5S-M0 T50S0M4 17-S160N-C 46 L-5-50-9-C PLT1.5S-C T50S9C2 WIT-50S-C 17-S160N-M 46 L-5-50-9-M PLT1.5S-M T50S9M4 WIT-50S-M 17-S190B-C 46 L-7-50-0-C TY525MX PLT2S-C0 IT2S-C0 08437 CT8BK50-C 17-S190B-M 46 L-7-50-0-M TY25MX PLT2S-M0 IT2S-M0 08388 CT8BK50-M 17-S190N-C 46 L-7-50-9-C TY525M PLT2S-C IT2S-C 08436 CT8NT50-C 17-S190N-M 46 L-7-50-9-M TY25M PLT2S-M IT2S-M 08387 CT8NT50-M 17-S200B-C 46 T50R0C2 17-S200B-M 46 T50R0M4 17-S200N-C 46 T50R9C2 WIT-50R-C 17-S200N-M 46 T50R9M4 WIT-50R-M 17-S250B-C 46 PLT2.5S-C0 17-S250B-M 46 PLT2.5S-M0 17-S250N-C 46 PLT2.5S-C 17-S250N-M 46 17-S280B-C 46 17-S280B-M 46 CT4NT18-M WIT-18R-M CT6BK18-C CT6NT18-C CT6NT18-M PLT1S-M PLT2.5S-M L-11-50-0-C IT3S-C0 08930 CT11BK50-C IT3S-D0 08286 CT11BK50-D, CT11NT50-D Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 6 CABLE TIES CROSS REFERENCE GUIDE Qualtek PN Page Catamount T&B Thomas & Betts Panduit Ideal Ind. Hellermann Tyton Avery Dennison Richco 3M 17-S280N-C 46 17-S280N-M 46 17-S300B-C 46 TY5253MX PLT3S-C0 T50I0C2 17-S300B-M 46 TY253MX PLT3S-M0 T50I0M4 17-S300N-C 46 TY5253M PLT3S-C T50I9C2 17-S300N-M 46 TY253M PLT3S-M T510I9M4 17-S360B-C 46 L-14-50-0-C 17-S360N-C 46 L-14-50-9-C 17-S370B-C 46 TY528MX PLT4S-C0 IT4S-C0 CT15BK50-C 17-S370B-M 46 TY28MX PLT4S-M0 IT4S-D0 CT15BK50-D 17-S370N-C 46 TY528M PLT4S-C IT4S-C CT15NT50-C 17-S370N-M 46 TY28M PLT4S-M IT4S-D 17-S380B-C 46 08428 17-S380B-M 46 10037 17-S380N-C 46 08427 17-S380N-M 46 17-S390B-C 46 T50L0C2 17-S390B-M 46 T50L0M4 17-S390N-C 46 T50L9C2 WIT-50L-C 17-S390N-M 46 T50L9M4 WIT-50L-M 17-S400B-C 46 PLT4.5S-C0 17-S400B-M 46 PLT4.5S-M0 17-S400N-C 46 PLT4.5S-C 17-S400N-M 46 PLT4.5S-M 17-S430B-C 46 17-S430N-C 46 17-S450B-C 46 PLT5S-C0 17-S450B-M 46 PLT5S-M0 17-S450N-C 46 PLT5S-C 17-S450N-M 46 PLT5S-M 18-HD305B-C 48 PLC2H-S25-L0 18-HD305N-C 48 18-HD400B-C 48 L-14-120MH-0-C TY537MX PLC4H-S25-L0 T120MR0K2 10040 18-HD400N-C 48 L-14-120MH-9-C TY537M PLC4H-S25-L T120MR9K2 08426 CT15NT120S-L 18-I150B-C 48 L-5-30MH-0-C TY534MX PLC1.5I-S8-C0 T30MR0C2 18-I150N-C 48 L-5-30MH-9-C TY534M PLC1.5I-S8-C T30MR9C2 18-M110B-C 48 TY533MX PLC1M-S4-C0 T18MR0C2 18-M110N-C 48 TY533M PLC1M-S4-C 18-S200B-C 48 L-7-50MH-0-C TY535MX PLC2S-S10-C0 08318 CT8BK50S-C 18-S200N-C 48 L-7-50MH-9-C TY535M 08484 CT8NT50S-C 18-S305B-C 48 L-11-50MH-0-C 18-S305N-C 48 L-11-50MH-9-C 18-S370B-C 48 L-14-50MH-0-C TY5354MX 18-S370N-C 48 L-14-50MH-9-C TY5354M 19-S160B-C 49 PRT1.5S-C0 RT50S0C2 19-S160N-C 49 PRT1.5S-C RT50S9C2 19-S200B-C 49 PRT2S-C0 10366 19-S200N-C 49 PRT2S-C 10364 19-S305B-C 49 PRT3S-C0 10369 19-S305N-C 49 PRT3S-C 10370 19-S380B-C 49 PRT4S-C0 19-S380N-C 49 PRT4S-C 20-S150B-C 50 L-11-50-9-C IT3S-C 08859 IT3S-D 08600 CT-15NT50-D 10036 IT5S-C0 IT5S-C PLC2H-S25-L T18MR9C2 IT2SMH-C0 PLC2S-S10-C IT2SMH-C PLC3S-S10-C0 IT3SMH-C0 T50MI0C2 10354 PLC3S-S10-C IT3SMH-C T50MI9C2 10350 PLC4S-S10-C0 IT4SMH-C0 PLC4S-S10-C IT4SMH-C RT50LL0C2 RT50LL9C2 L-5-50R-0-C REL50R0C2 REL50R9C2 20-S150N-C 50 L-5-50R-9-C 20-S200B-C 50 L-8-50R-0-C Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. 7 CT11NT50-C www.Qualtekusa.com WIT-50SR-C CABLE TIES CROSS REFERENCE GUIDE Qualtek PN Page Catamount T&B Thomas & Betts Panduit Hellermann Tyton Ideal Ind. Avery Dennison Richco 20-S200N-C 50 20-S250B-C 50 20-S250N-C 50 20-S300B-C 50 L-10-50R-0-C 20-S300N-C 50 L-10-50R-9-C 21A-M100B-C 51 21A-M100N-C 51 PLWP1M-C 21A-S130B-C 51 PLWP1S-C0 WIT-50SA-UVB 21A-S130N-C 51 PLWP1S-C WIT-50SA-01 3M L-8-50R-9-C REL50L0C2 REL50L9C2 WIT-18RA-UVB 126-00041 10690 WIT-18RA-01 21A-S200B-C 51 L-7-50PM-0-C TY538MX PLWP2S-C0 WIT-50RA-UVB 21A-S200N-C 51 L-7-50PM-9-C TY538M PLWP2S-C WIT-50RA-01 21A-S130N-C 51 21B-I155B-C 51 PLP1.5I-M0 126-00045 21B-I155N-C 51 TY554M PLP1.5I-C 126-00043 21B-S200B-C 51 PLP2S-M0 T50RSF0C2 08446 WIT-50RLA-3-UVB 21B-S200N-C 51 PLP2S-C T50RSF9C2 08439 WIT-50RLA-3 22-H200A-C 52 MLT2LH-LP MBT8H-S MBT8H LS-7.9-200A 22-H200B-C 52 LS-7.9-200B MLT2LH-LP316 22-H200D-C 52 LS-7.9-200-C MLTFC2H-LP316 22-H360A-C 52 LS-7.9-360A MLT4LH-LP MBT14H-S 22-H360B-C 52 LS-7.9-360B MLT4LH-LP316 MBT14H 22-H360D-C 52 LS-7.9-360-C MLTFC4H-LP316 22-H520A-C 52 LS-7.9-520A MLT6LH-LP MBT20H-S 22-H520B-C 52 LS-7.9-520B MLT6LH-LP316 MBT20H 22-H520D-C 52 LS-7.9-520-C MLTFC6H-LP316 22-H680A-C 52 LS-7.9-680A MLT8LH-LP MBT27H-S 22-H680B-C 52 LS-7.9-680B MLT8LH-LP316 MBT27H 22-H680D-C 52 LS-7.9-680-C MLTFC8H-LP316 22-H840A-C 52 LS-7.9-840A MBT33H-S 22-H840B-C 52 LS-7.9-840B MBT33H 22-H840D-C 52 LS-7.9-840-C 22-S125A-C 52 MLT1S-CP 22-S125B-C 52 MLT1S-CP316 MBT5S 22-S200A-C 52 LS-4.6-200A MLT2S-CP MBT8S-S MLT2S-CP316 MBT8S 22-S200B-C 52 LS-4.6-200B 22-S200D-C 52 LS-4.6-200-C 22-S260A-C 52 22-S260B-C 52 22-S360A-C 52 MBT5S-S MLT2.7S-CP MLT2.7S-CP316 LS-4.6-360A MBT14S-S 22-S360B-C 52 LS-4.6-360B MLT4S-CP 22-S360D-C 52 LS-4.6-360-C MLT4S-CP316 MBT14S 22-S520A-C 52 LS-4.6-520A MLT6S-CP MBT20S-S 22-S520B-C 52 LS-4.6-520B MLT6S-CP316 MBT20S 22-S520D-C 52 LS-4.6-520-C 22-S680A-C 52 LS-4.6-680A MLT8S-CP MBT27S-S 22-S680B-C 52 LS-4.6-680B MLT8S-CP316 MBT27S 22-S680D-C 52 LS-4.6-680-C 22-S840A-C 52 LS-4.6-840A MLT10S-CP MBT33S-S 22-S840B-C 52 LS-4.6-840B MLT10S-CP316 MBT33S 22-S840D-C 52 LS-4.6-840-C Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only. www.Qualtekusa.com 8 9 HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY Heat Shrink Applications White Goods Electronics Aviation Automotive Pipe Line Power Generation Wire Harness Military Marine Telecom Qualtek heat shrinkable products include Polyolefin, Silicon, Teflon, Viton, Kynar, Halogen-Free, high temp, single wall, double wall and adhesive lined tubing with varying shrink ratio, colors and sizes. We also offer Military (MIL) specification shrink tubing with varying ratios, colors and sizes. Qualtek's heat shrink tubing products are produced by cross-linking extruded polymer compounds which produces a shape memory effect and when heated can be recovered to its original shape. Heat Shrink Technology Compound With a strong background in the research and development of modified polymer materials, we have developed a variety of chemical formulations for different types of heat shrinkable products. Extrusion Equipped with 20 advanced extrusion lines, we are able to produce stable and homogeneous dimensions. Our advanced co-extrusion technology makes it possible to manufacture polyolefin / hot melt adhesive dual wall and insulation / conductive multi-layer tubing. Irradiation There are three sets of specially designed electronic accelerators in-house to meet requirements of different sizes and shapes of shrinkable products that assures proper crosslinking of the product. Expansion This important process is required to obtain final forms and dimensions of heat shrink products. With our modern equipment and technology, we can accurately control the dimensions, longitudinal changes and eccentricity of the final product. Packaging After completion of the production cycle and quality control checks, the product is packaged to meet market demands such as standard product or is processed to customer designs from cut-to-length pieces to special packaging requirements. www.Qualtekusa.com 10 TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS Tubing Features Selection Parameters Wide range of sizes: micro ∅ up to very large ∅ Size Large selection of colors Shrink Ratio Low shrink temperatures: down to 65°C Operating Temperature High temperature rating: up to 260°C Recovery Temperature Abrasion, moisture and chemical / solvent resistant Flammablilty Rating High shrink ratios: 2:1, 3:1, 4:1, & 6:1 Electrical Rating Halogen & PBB free with low lead & cadmium Certifications & Specifications Flexible types: super flexible, flexible, semi rigid & rigid Resistance to Solvents & Chemicals Single wall: ultra thin, very thin, thin, medium & heavy Flexibility Dual wall adhesive lined: thin, medium & heavy Mechanical Properties Packaging: large & small spools, cut-to-length, kits & bags Special compound formulations available upon request Installation Instructions Place the heat shrink tubing over the product to be covered. Heat the tubing evenly until the tube shrinks around the object or the tube is shrunk completely (according to shrink ratio). Dual wall shrink tubing with adhesive may require additional heating to melt the adhesive for accurate installation. Constantly move the heat source or product during installation. Avoid concentrating the heat source in one location on the heat shrink tubing. Maintain heat source temperature to achieve appropriate shrink ratio and prevent charring or burning. Recommended heat sources include: Hot air gun, oven, infrared heat source, or soft flame. Use adequate ventilation during and following installation. Stop heating immediately if charring or burning of tubing occurs to prevent injury to operator or product. Charring or burning of ceratin tubing can create hazardous fumes that can potentially cause eye, skin, nose and throat irritation. For additional information, please contact your supplier or Qualtek. 11 www.Qualtekusa.com HEAT SHRINK PRODUCTS PART NUMBER GUIDE PART NUMBER EXAMPLE: Q2-F-3/64-01-QB48IN-25 PART NUMBER EXAMPLE: X- X-X-XX -X (6) QUANTITY - QB (Q BAG) ONLY (5) LENGTH - SEE LIST BELOW (4) STANDARD PACKAGING CODES - SEE LIST BELOW (3) COLOR - SEE LIST BELOW (2) SIZE - SEE TABLE BELOW (1) TYPE - SEE SPEC SHEET(Q1, Q2-F, Q-150K, etc....) NOTE: Table below represents information on individual spec sheet 4 HEAT SHRINK THIN WALL TUBING 1 STANDARD PACKAGING CODES: Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 MS - MINI SPOOL + LENGTH (FT or M) QB - Q BAG (Polybag contains quantity specified) QX - Q BOX + LENGTH (FT or M) RK - REFILL BAG SS - STANDARD SPOOL + LENGTH (FT or M) Features/Applications Provides both commercial and military applications electrical insulation and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience. Bundles wires for very flexible light-duty harnesses. Identifies or color-codes wires, cables, terminals and components. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead Standard colors: Black, red, blue, yellow, green, white, clear (class 2) RoHS Compliant Technical Data Technical Property Data 5 3 Operating Temperature LENGTH: COLOR CODES: 01 02 03 04 05 06 07 08 09 10 11 12 FT = FEET M = METERS IN = INCH MM = MILLIMETERS BLACK CLEAR WHITE RED BLUE GREEN YELLOW YELLOW / GREEN BROWN ORANGE ASSORTED COLORS GRAY Test Method Typical Data IEC 216 -55°C to +135°C ASTM D 2671 >14 MPa Tensile Strength Ultimate Elongation ASTM D 2671 > 600% Longitudinal Shrinkage UL 224 Eccentricity UL 224 < 30% 175°C, 168 hrs. > 11 MPa > 350 % Heat Aging Tensile Strength Ultimate Elongation Flammability 0 + 5% VW-1 Pass Dielectric Strength ASTM D 150 >20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 876 >10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size Inch mm Inside Diameter (min.) 3/64 1/16 3/32 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2 3 4 5 6 1.2 1.6 2.4 3.2 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 31.8 38.1 50.8 76.2 102.0 125.0 151.0 1.2 1.6 2.4 3.2 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 31.8 38.1 50.8 76.2 102.0 125.0 151.0 After Recovered (mm) Standard Packaging Inside Diameter (max.) Wall Thickness (min.) Mini Spool *(MS) (Feet) Standard Spool *(SS) (Feet) Box Length *(QX) (Feet) 0.6 0.8 1.2 1.6 2.4 3.2 4.0 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 38.1 50.8 63.5 75.0 0.40 0.40 0.48 0.48 0.48 0.56 0.62 0.62 0.62 0.68 0.68 0.87 1.00 1.00 1.10 1.20 1.35 1.40 1.40 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 - 1000 1000 500 500 500 500 250 250 200 200 200 200 100 100 100 100 100 50 50 50 50 50 50 30 30 30 30 15 15 15 15 - Cut to Length Pcs. *(QB) Qty per bag 6” 48” 40 36 32 28 24 20 18 16 14 14 12 8 8 5 3 2 1 1 1 25 25 25 25 25 25 24 25 5 5 5 5 5 5 5 2 2 2 2 Notes: 1. * See page 9 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request 4. Clear tubing is not flame retardant, UL or CSA approved. SAMPLE TABLE: Q2-F 2 www.Qualtekusa.com 11 Product Dimensions As Supplied (mm) Size (inch) Inside Diameter (max.) Standard Packaging After Recovered (mm) Inside Diameter (max.) Wall Thickness (min.) Mini Spool *(MS) (Feet) Standard Spool *(SS) (Feet) Box Length *(QX) (Feet) Cut to Length Pcs. *(QB) Qty per bag 6” 48” 3/64 1.2 0.6 0.40 100 1000 50 40 25 1/16 1.6 0.8 0.40 100 1000 50 36 25 3/32 2.4 1.2 0.48 100 500 50 32 25 1/8 3.2 1.6 0.48 100 500 50 28 25 3/16 4.8 2.4 0.48 100 500 30 24 25 1/4 6.4 3.2 0.56 100 500 30 20 25 5/16 8.0 4.0 0.62 100 250 30 18 25 3/8 9.5 4.8 0.62 100 250 30 16 25 1/2 12.7 6.4 0.62 100 200 15 14 5 5/8 15.9 8.0 0.68 50 200 15 14 5 3/4 19.1 9.5 0.68 50 200 15 12 5 1 25.4 12.7 0.87 50 200 15 8 5 1 1/4 31.8 15.9 1.00 50 100 - 8 5 1 1/2 38.1 19.1 1.00 50 100 - 5 5 2 50.8 25.4 1.10 50 100 - 3 5 3 76.2 38.1 1.20 - 100 - 2 2 4 102.0 50.8 1.35 - 100 - 1 2 5 125.0 63.5 1.40 - 50 - 1 2 6 151.0 75.0 1.40 - 50 - 1 2 www.Qualtekusa.com 6 12 HEAT SHRINK THIN WALL TUBING Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Typically used where rapid shrinking and space saving is important. Low shrink temperature further reduces installation time and risk of damage to temperature sensitive components. Low heavy metal content and flame retardant formulation make this a product that meets global environmental standards. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals4: File No. E236137, File No. 242540, 125°C, VW-1, 300V Meets: Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s Cadmium content: <5 ppm, Lead content: <30 ppm Standard color: Black Other colors are available upon request RoHS Compliant Technical Data Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 350% Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength IEC 243 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC 2500V, 1 min. No Breakdown Volume Resistance ASTM D 2671 > 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size (Inch) Inside Diameter (min.) Product Dimensions After Recovered (mm) Inside Diameter (max.) Wall Thickness (min.) Standard Packaging Mini Spool *(MS) Standard Spool *SS (Feet) (Feet) As Supplied (mm) After Recovered (mm) Standard Spool *(SS) (Meter) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) 1.0 1.0 0.50 0.20 200 1.5 1.5 0.75 0.20 200 48” 2.0 2.0 1.00 0.20 200 Cut to Length Pcs. *(QB) Qty per bag 6” Size (mm) 3/64 1.2 0.60 0.20 100 1000 40 25 2.5 2.5 1.25 0.25 200 1/16 1.6 0.80 0.20 100 1000 36 25 3.0 3.0 1.50 0.25 200 25 3.5 3.5 1.75 0.25 200 25 4.0 4.0 2.00 0.25 200 3/32 1/8 2.4 3.2 1.20 1.60 0.25 0.25 100 100 500 500 32 28 3/16 4.8 2.40 0.25 100 500 24 25 5.0 5.0 2.50 0.28 100 1/4 6.4 3.20 0.28 100 500 20 25 6.0 6.0 3.00 0.28 100 7.0 3.50 0.28 100 3/8 9.5 4.80 0.28 100 250 16 25 7.0 1/2 12.7 6.40 0.28 100 200 14 5 8.0 8.0 4.00 0.28 100 9.0 9.0 4.50 0.28 100 10.0 10.0 5.00 0.28 100 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. UL and CSA Approvals only for black color. 13 www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications Provides both commercial and military applications electrical insulation and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience. Bundles wires for very flexible light-duty harnesses. Identifies or color-codes wires, cables, terminals and components. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead Standard colors: Black, red, blue, yellow, green, white, clear (class 2) RoHS Compliant Technical Data Technical Property Data Test Method Typical Data IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 600% Longitudinal Shrinkage UL 224 0 + 5% Eccentricity UL 224 < 30% 175°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 >20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 876 >10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size Inch mm Inside Diameter (min.) 3/64 1/16 3/32 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2 3 4 5 6 1.2 1.6 2.4 3.2 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 31.8 38.1 50.8 76.2 102.0 125.0 151.0 1.2 1.6 2.4 3.2 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 31.8 38.1 50.8 76.2 102.0 125.0 151.0 After Recovered (mm) Standard Packaging Inside Diameter (max.) Wall Thickness (min.) Mini Spool *(MS) (Feet) Standard Spool *(SS) (Feet) Box Length *(QX) (Feet) 0.6 0.8 1.2 1.6 2.4 3.2 4.0 4.8 6.4 8.0 9.5 12.7 15.9 19.1 25.4 38.1 50.8 63.5 75.0 0.40 0.40 0.48 0.48 0.48 0.56 0.62 0.62 0.62 0.68 0.68 0.87 1.00 1.00 1.10 1.20 1.35 1.40 1.40 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 - 1000 1000 500 500 500 500 250 250 200 200 200 200 100 100 100 100 100 50 50 50 50 50 50 30 30 30 30 15 15 15 15 - Cut to Length Pcs. *(QB) Qty per bag 6” 48” 40 36 32 28 24 20 18 16 14 14 12 8 8 5 3 2 1 1 1 25 25 25 25 25 25 24 25 5 5 5 5 5 5 5 2 2 2 2 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request 4. Clear tubing is not flame retardant, UL or CSA approved. www.Qualtekusa.com 14 HEAT SHRINK THIN WALL TUBING Q2-F3X HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Outstanding physical, chemical and electrical properties make it a good choice for electrical insulation, bundling and marking. It also prevents corrosion plus provides mechanical protection. It’s 3:1 shrink ratio makes it suitable for applying to irregular and difficult shapes. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259, Standard color: Black Special Colors: Red, blue, yellow, green, clear (class 2) RoHS Compliant Technical Data Technical Property Data Test Method Typical Data IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 600% UL 224 0 + 5% ASTM D 2671 < 35% 175°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions Inch After Recovered (mm) As Supplied (mm) Size mm Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Standard Spool *(SS) (Feet) Cut to Length Pcs. *(QB) Qty per bag 6” 48” 1/16 1.5/0.5 1.6 0.5 0.45 500 28 25 1/8 3.0/1.0 3.2 1.0 0.55 500 24 25 3/16 4.5/1.5 4.8 1.5 0.60 500 24 25 1/4 6.0/2.0 6.4 2.0 0.65 250 20 25 25 3/8 9.0/3.0 9.5 3.0 0.75 250 16 1/2 12.0/4.0 12.7 4.0 0.80 150 14 5 3/4 18.0/6.0 19.1 6.0 0.90 150 12 5 1 24.0/8.0 25.4 8.0 1.20 150 8 5 1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. 15 Standard Packaging www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q2-F4X HIGH SHRINK RATIO, HIGHLY FLEXIBLE FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Manufactured with specially developed formulation and technology, it can easily fit over a large diameter connector or transition and shrink down onto a smaller diameter jacket. Because of its outstanding physical, chemical and electrical properties it’s widely used in some important fields such as military, aerospace and fine electronic instruments for insulating or repairing harnesses, cables and connectors. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approval: File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Standard color: Black Special colors: Red, blue, yellow, green UV Resistant RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 600% UL 224 0 + 5% ASTM D 2671 < 35% 175°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 > 10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag Inch mm Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) 6” 48” 3/4 19.1/4.6 19.1 4.6 1.7 12 25 1 25.4/7.0 25.4 7.0 1.7 8 25 1 1/2 38.1/9.5 38.1 9.5 1.7 5 25 2 50.8/14.0 50.8 14.0 1.7 3 25 3 76.2/20.6 76.2 20.6 1.7 2 25 4 102.0/26.7 102.0 26.7 1.7 1 5 4 1/2 115.0/36.8 115.0 36.8 1.7 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 16 HEAT SHRINK THIN WALL TUBING Q2-F2X(YG), Q2-F3X(YG) YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1 & 3:1 Features/Applications Dual color yellow and green striped polyolefin tubing primarily used to identify “ground” wires. It is flexible and flame retardant with permanent color properties, making it easy to install and identify. Used for light duty harnessing and ground wire identification. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259 Standard color: Yellow & green striped RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 600% UL 224 0 + 5% ASTM D 2671 < 35% 175°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >10 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions (2:1) Q2-F2X(YG) Size (Inch) 14 As Supplied (mm) Inside Diameter (min.) After Recovered (mm) Inside Wall Diameter Thickness (max.) (min.) Product Dimensions (3:1) Q2-F3X(YG) Standard Spool *(SS) (Meter) Size (Inch) As Supplied (mm) Inside Diameter (min.) After Recovered (mm) Inside Wall Diameter Thickness (max.) (min.) Standard Spool *(SS) (Meter) 3/64 1.2 0.6 .33 200 1/16 1.6/0.5 1.6 0.5 0.51 200 1/16 1.6 0.8 .36 200 3/32 2.4/0.8 2.4 0.8 0.51 200 3/32 2.4 1.2 .44 200 1/8 3.2 1.6 .44 200 3/16 4.8 2.4 .56 100 1/4 6.4 3.2 .56 100 5/16 8.0 4.0 .56 100 3/8 9.5 4.8 .56 1/2 12.7 6.4 5/8 16.0 8.0 3/4 19.1 1 1/8 3.2/1.0 3.2 1.0 0.55 200 3/16 4.8/1.5 4.8 1.5 0.60 100 1/4 6.4/2.0 6.4 2.0 0.65 100 3/8 9.5/3.0 9.5 3.0 0.75 100 100 1/2 12.7/4.0 12.7 4.0 0.75 50 .65 50 3/4 19.1/6.0 19.1 6.0 0.85 50 .69 50 1 25.4/8.0 25.4 8.0 1.00 50 9.5 .80 50 1 1/2 39/13.0 39.0 13.0 1.15 50 25.4 12.7 .90 50 1 1/4 31.8 15.9 .90 50 2 1/2 38.1 19.1 1.02 50 2 50.8 25.4 1.02 50 3 76.2 38.1 1.20 30 4 101.6 50.8 1.30 30 17 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q2-HF LOW SMOKE, HALOGEN FREE, FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications As a kind of totally environmental friendly heat-shrinkable tube, it is made with specially designed halogen free polyolefin. It produces neither toxic smoke or harmful substance when burning, which meets the growing demand of environmental protection all over the world. In addition to the common fine physical and chemical specifications the tube also shows excellent flame-retardant, insulation, low temperature shrinking and flexible properties and thus is widely used in electronics, communication and the auto industry. Operating temperature: -55°C to +105°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. 242540 Standard colors: Black, white Other colors are available upon request. RoHS Compliant Technical Data Property Operating Temperature IEC 216 -55°C to +105°C ASTM D 2671 >12 MPa Ultimate Elongation ASTM D 2671 > 400% Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 11 MPa > 200 % VW-1 Self extinguish in 30 sec. Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions Product Dimensions 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 Typical Data Tensile Strength Longitudinal Shrinkage Size (mm) Test Method As Supplied (mm) Inside Diameter (min.) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 After Recovered (mm) Inside Wall Diameter Thickness (max.) (min.) 0.50 .33 0.75 .36 1.00 .44 1.25 .44 1.50 .44 1.75 .44 2.00 .44 2.50 .56 3.00 .56 3.50 .56 4.00 .56 4.50 .56 5.00 .56 5.50 .56 6.00 .56 6.50 .65 7.00 .69 Standard Spool *(SS) (Meter) Size (mm) 200 200 200 200 200 200 200 100 100 100 100 100 100 100 50 50 50 15.0 16.0 18.0 20.0 22.0 25.0 28.0 30.0 35.0 40.0 50.0 60.0 70.0 80.0 100.0 125.0 150.0 As Supplied (mm) Inside Diameter (min.) 15.0 16.0 18.0 20.0 22.0 25.0 28.0 30.0 35.0 40.0 50.0 60.0 70.0 80.0 100.0 125.0 150.0 After Recovered (mm) Inside Wall Diameter Thickness (max.) (min.) 7.50 0.69 8.00 0.69 9.00 0.80 10.00 0.80 11.00 0.80 12.50 0.90 14.00 0.90 15.00 0.90 17.50 0.90 20.00 1.00 25.00 1.00 30.00 1.00 35.00 1.20 40.00 1.20 50.00 1.30 60.00 1.30 75.00 1.30 Standard Spool *(SS) (Meter) 50 50 50 50 50 50 50 50 50 50 50 30 30 30 30 15 15 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 18 HEAT SHRINK THIN WALL TUBING Q2-LS VERY LOW SHRINK TEMPERATURE, FLEXIBLE, HALOGEN FREE, POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Manufactured with modified radiation cross-linked polyolefin. This specially designed halogen free formulation makes the tubing very flexible and shrinks at low temperature. Suitable for applications where heat sensitive components are used and quick shrinkage is required. The flammability of the tubing meets the automotive flame propagation standard FMVSS 302. Although very flexible, it has good mechanical and electrical performance. Operating temperature: -55°C to +125°C Minimum shrink temperature: 65°C Full recovery temperature: 95°C Approvals: File No. 242540 Meets: SONY-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >12 MPa Ultimate Elongation ASTM D 2671 > 400% Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 11 MPa > 200 % Flammability FMVSS 302 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions After Recovered (mm) As Supplied (mm) Size (Inch) Inside Diameter (min.) Inside Diameter (max.) Standard Packaging Wall Thickness (min.) Standard Spool (SS)* (Feet) Cut to Length Pcs. (QB)* Qty per bag 6” 48” 36 25 1/16 1.6 0.8 0.5 100 1000 3/32 2.4 1.2 0.5 100 500 32 25 1/8 3.2 1.6 0.5 100 500 28 25 3/16 4.8 2.4 0.5 100 500 24 25 1/4 6.4 3.2 0.6 100 500 20 25 5/16 8.0 4.0 0.6 100 250 18 25 3/8 9.5 4.8 0.6 100 250 16 25 1/2 12.7 6.4 0.6 100 200 14 5 5/8 16.0 8.0 0.6 50 200 14 5 3/4 19.1 9.5 0.8 50 200 12 5 1 25.4 12.7 0.9 50 200 8 5 1 1/4 31.8 15.9 0.9 50 100 8 5 1 1/2 38.1 19.1 1.0 50 100 5 5 2 50.8 25.4 1.1 50 100 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. To ensure dimensional stability, Q2-LS should be stored at temperature below 40°C/104°F 19 Mini Spool (MS)* (Feet) www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q2-R SEMI-RIGID, MULTI-PURPOSE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Outstanding physical, chemical and electrical properties. Widely used for insulation of harnesses and connectors in such fields as military, aerospace and fine electronic instruments. Resistant to common fluids and solvents. Operating temperature: -55°C to +135°C Minimum shrink temperature: 70°C Full recovery temperature: 130°C Approvals4: File No. E236137, File No. 242540,125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/6 Class 1 & 2, Sony SS-00259 Standard colors: Black, clear (Non-flame retardant) RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +135°C Tensile Strength ASTM D 2671 >16 MPa Ultimate Elongation ASTM D 2671 > 500% UL 224 0 + 5% ASTM D 2671 < 30% 175°C, 168 hrs. > 12 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions After Recovered (mm) As Supplied (mm) Size (Inch) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag 6” 48” Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Mini Spool *(MS) (Feet) Standard Spool *(SS) (Feet) 3/64 1.2 0.6 0.4 100 500 40 25 1/16 1.6 0.8 0.4 100 500 36 25 3/32 2.4 1.2 0.5 100 500 32 25 1/8 3.2 1.6 0.5 100 500 28 25 3/16 4.8 2.4 0.5 100 250 24 25 1/4 6.4 3.2 0.6 100 250 20 25 3/8 9.5 4.8 0.6 100 250 16 25 1/2 12.7 6.4 0.6 100 150 14 5 5/8 16.0 8.0 0.7 50 150 14 5 3/4 19.1 9.5 0.7 50 150 12 5 1 25.4 12.7 0.9 50 150 8 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. www.Qualtekusa.com 20 HEAT SHRINK THIN WALL TUBING Q2-Z ENVIRONMENT FRIENDLY, FLEXIBLE FLAME RETARDANT, HEAT SHRINKABLE TUBING SHRINK RATIO 2:1 Features/Applications An environment friendly, flame retardant shrink tubing. Specially designed formulation to meet UL 224 and CSA 22.2 on the basis of no harmful substance such as PBB, PBBE, PBBO and toxic metal compounds. Widely used for insulation, strain relief, harnessing, bundling and color coding of wire with a low shrink temperature. Good flexibility and superior mechanical strength in such fields as electronics, communication and automobile. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals: File No. E236137, File No. 242540, 125°C,VW-1, 600V Meets: Sony SS-00259, Material: No PBB’s, PBBO’s, PBBE’s Cadmium content <5 ppm, Lead content <10 ppm Standard colors: Black, red, blue, yellow, green, white Other colors are available upon request. RoHS Compliant Product Dimensions Technical Data Property Test Method Typical Data UL 224 -55°C to +125°C Tensile Strength ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 400% Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 12 MPa > 350% Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC 2500, 1 min. No Breakdown Volume Resistance IEC 93 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion 14 > 10 Size (mm) Ω.cm Product Dimensions As Supplied (mm) Size (Inch) After Recovered (mm) Standard Packaging Inside Diameter (max.) Wall Thickness (min.) Mini Spool *(MS) (Feet) 3/64 1.2 0.60 0.33 100 1000 50 1/16 1.6 0.80 0.36 100 1000 50 36 25 3/32 2.4 1.20 0.44 100 500 50 32 25 1/8 3.2 1.60 0.44 100 500 50 28 25 3/16 4.8 2.40 0.56 100 500 30 24 25 1/4 6.4 3.20 0.56 100 500 30 20 25 5/16 8.0 4.00 0.56 100 250 30 18 25 3/8 9.5 4.80 0.56 100 250 30 16 25 1/2 12.7 6.40 0.65 100 200 15 14 5 5/8 16.0 8.00 0.69 50 200 15 14 5 3/4 19.1 9.50 0.80 50 200 15 12 5 1 25.4 12.70 0.90 50 200 15 8 5 1 1/4 31.8 15.90 0.90 50 100 - 8 5 1 1/2 38.1 19.10 1.02 50 100 - 5 5 2 50.8 25.40 1.02 50 100 - 3 5 3 76.2 38.10 1.20 - 100 - 2 2 4 101.6 50.80 1.30 - 100 - 1 2 5 126.0 63.50 1.30 - 50 - 1 2 6 150.0 76.00 1.30 - 50 - 1 2 21 Standard Box Spool Length *(SS) *(QX) (Feet) (Feet) Cut to Length Pcs. *(QB) Qty per bag 6” 48” 40 25 Inside Diameter (min.) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 25.0 28.0 30.0 35.0 40.0 50.0 60.0 70.0 80.0 100.0 125.0 150.0 As Supplied (mm) Inside Diameter (min.) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 25.0 28.0 30.0 35.0 40.0 50.0 60.0 70.0 80.0 100.0 125.0 150.0 After Recovered (mm) Inside Wall Diameter Thickness (max.) (min.) 0.50 0.33 0.75 0.36 1.00 0.44 1.25 0.44 1.50 0.44 1.75 0.44 2.00 0.44 2.50 0.56 3.00 0.56 3.50 0.56 4.00 0.56 4.50 0.56 5.00 0.56 5.50 0.56 6.00 0.56 6.50 0.65 7.00 0.69 7.50 0.69 8.00 0.69 9.00 0.80 10.00 0.80 11.00 0.80 12.50 0.90 14.00 0.90 15.00 0.90 17.50 0.90 20.00 1.00 25.00 1.00 30.00 1.00 35.00 1.20 40.00 1.20 50.80 1.30 63.50 1.30 76.00 1.30 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com Standard Spool *(SS) (Meter) 200 200 200 200 200 200 200 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 30 30 30 30 15 15 HEAT SHRINK THIN WALL TUBING Q2-3X FLEXIBLE, THIN WALL FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Widely used for electrical insulation. Protects in-line components, disconnect terminals and splices with its high strength and excellent resilience. Bundles wires for very flexible light-duty harnesses. Identifies or color-codes wires, cables, terminals and components. Free from environment harmful substances such as PBB’s, PBBO’s, PBBE’s and toxic heavy metal compounds in its components. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259 Standard colors: Black, red, blue, yellow, green, white, clear Other colors are available upon request. RoHS Compliant Technical Data Property Test Method Typical Data Operating Temperature IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 12 MPa > 350 % Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength ASTM D 150 > 20kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag Inch mm Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Standard Spool *(SS) (Feet) 6” 48” 1/16 1.5/0.5 1.6 0.5 0.45 500 28 25 1/8 3.0/1.0 3.2 1.0 0.55 500 24 25 3/16 4.5/1.5 4.8 1.5 0.60 500 24 25 1/4 6.0/2.0 6.4 2.0 0.65 250 20 25 3/8 9.0/3.0 9.5 3.0 0.75 250 16 25 1/2 12.0/4.0 12.7 4.0 0.80 150 14 5 3/4 18.0/6.0 19.1 6.0 0.90 150 12 5 1 24.0/8.0 25.4 8.0 1.00 150 8 5 1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. www.Qualtekusa.com 22 HEAT SHRINK HEAT SHRINK THIN THIN WALLWALL TUBING TUBING Qualtek Electronics Q-150K 150°C , BLACK, MODIFIED THIN WALL FLEXIBLE PVDF TUBING SHRINK RATIO 2:1 Features/Applications Excellent flame-retardant, heat shrinkable polyvinylidence fluoride tubing for applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects solder joints, terminals and connectors from most industrial fluids, solvents and chemicals. Operating temperature: -55°C to +150°C Minimum shrink temperature: 135°C Full recovery temperature: 150°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/18 Standard colors: Black, Clear RoHS Compliant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 > 30 MPa Ultimate Elongation ASTM D 2671 > 150% Flammability VW-1 Pass Volume Resistance IEC 93 >10 Ω.cm 14 Copper Stability 180°C, 168 hrs. Pass Copper Corrosion 180°C, 168 hrs. No Corrosion Product Dimensions As Supplied (mm) Size Inch mm After Recovered (mm) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Product Dimensions Tubing Shape 6” 48” 3/64 1.2 1.2 0.6 0.26 Round 200 32 25 1/16 1.6 1.6 0.8 0.26 Round 200 28 25 3/32 2.4 2.4 1.2 0.26 Round 200 24 25 1/8 3.2 3.2 1.6 0.26 Round 100 20 25 3/16 4.8 4.8 2.4 0.26 Round 100 16 25 1/4 6.4 6.4 3.2 0.26 Round 100 12 25 3/8 9.5 9.5 4.8 0.30 Flat 50 8 25 1/2 12.7 12.7 6.4 0.30 Flat 50 4 5 3/4 19.1 19.1 9.5 0.41 Flat 50 2 5 1 25.4 25.4 12.7 0.41 Flat 50 1 5 1 1/2 38.1 38.1 19.0 0.51 Flat 50 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 23 Standard Spool *(SS) (Meter) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q-175K 175°C , CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING SHRINK RATIO 2:1 Features/Applications Semi-rigid flame retardant heat shrinkable polyvinylidene fluoride tubing for applications requiring high temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistant properties. It reliably protects wires, solder joints, terminals, connectors and components from most industrial fluids, solvents and chemicals. Operating temperature: -55°C to +175°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/18 Standard color: Clear RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +175°C Tensile Strength ASTM D 2671 > 34.5 MPa Ultimate Elongation ASTM D 2671 > 150% Operating Temperature Ultimate Elongation After Aging Heat Shock Cold Bend 250°C, 168 hrs. > 100% 300°C,1 hr. No cracking -55°C, 1 hr. No cracking Dielectric Strength ASTM D 2671 > 30 kV / mm Volume Resistance IEC 93 Flammability VW-1 > 10 13 Ω.cm Pass Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag Inch mm Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Standard Spool *(SS) (Meter) 6” 48” 3/64 1.2 1.2 0.6 0.20 200 32 25 1/16 1.6 1.6 0.8 0.20 200 28 25 3/32 2.4 2.4 1.2 0.23 200 24 25 1/8 3.2 3.2 1.6 0.23 200 20 25 3/16 4.8 4.8 2.4 0.23 100 16 25 1/4 6.4 6.4 3.2 0.28 100 12 25 3/8 9.5 9.5 4.8 0.28 - 8 25 1/2 12.7 12.7 6.4 0.28 - 4 5 3/4 19.1 19.1 9.5 0.36 - 2 5 1 25.4 25.4 12.7 0.41 - 1 5 1 1/2 38.1 38.1 19.0 0.51 - 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 24 HEAT SHRINK THIN WALL TUBING Q-200E 200°C, VERY FLEXIBLE MODIFIED FLUOROELASTOMER TUBING (Viton® ) SHRINK RATIO 2:1 Features/Applications Q-200E is made from modified fluoroelastomer with superior impact, abrasion and cut-through resistance. Used for applications requiring high resistance to corrosive fluids, fuels, lubricants, acids and solvents at elevated temperatures. Very flexible at high and low temperatures without cracking. Operating temperature: -55°C to +200°C Minimum shrink temperature: 150°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/13 Standard Color: Black RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +200°C Tensile Strength ASTM D 2671 > 8.5 MPa Elongation at Break ASTM D 2671 > 250% Operating Temperature 250°C, 168 hrs. > 8MPa > 200% Heat Shock 300°C, 4 hrs. No cracking or dropping Flexibility ASTM D 412 < 13.8 MPa Dielectric Strength ASTM D 2671 > 7.9kV / mm Volume Resistance ASTM D 876 > 10 Ω.cm Elongation at Break After Aging Copper Corrosion Flammability 14 UL 224 No corrosion ASTM D 2671 Self-extinguish in 15 sec. Product Dimensions As Supplied (mm) Size Inch mm After Recovered (mm) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Tubing Shape 6” 48” 1/8 3.2 3.2 1.6 0.76 Round 50 20 25 3/16 4.8 4.8 2.4 0.90 Round 50 16 25 1/4 6.4 6.4 3.2 0.90 Round 50 12 25 3/8 9.5 9.5 4.8 0.90 Round 50 8 25 1/2 12.7 12.7 6.4 1.10 Round 30 4 5 3/4 19.1 19.1 9.5 1.30 Round 30 2 5 1 25.4 25.4 12.7 1.65 Flat 30 1 5 1 1/2 38.1 38.1 19.1 1.90 Flat 15 1 5 2 50.8 50.8 25.4 2.80 Flat 15 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Viton® is a registered trademark of E.I. Du Pont de Nemours and Co. Inc. 25 Standard Spool *(SS) (Meter) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag www.Qualtekusa.com HEAT SHRINK THIN WALL TUBING Q-PTFE PTFE HEAT SHRINKABLE TUBING Features/Applications Q-PTFE heat shrinkable tubing is manufactured with polytetrafluoroethylene (PTFE). It is specially designed for applications where high temperature and chemical resistance is required. This tubing works great as an electrical insulator and where highly flame retardant properties are required, such as in the automotive, military and aerospace fields. Operating temperature: -65°C to +260°C Full recovery temperature: 350°C Meets: SAE-AMS-DTL-23053/12 Standard color: Clear RoHS Compliant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 > 17.3 MPa Ultimate Elongation ASTM D 2671 > 200% Specific Gravity ASTM D 792 2.30 Heat Shock (400°C, 4hrs.) ASTM D 2671 No cracking or dropping Cold Bend Test (-65°C, 4hrs.) ASTM D 2671 No cracking Volume Resistance ASTM D 2671 > 10 Ω.cm Dielectric Strength ASTM D 2671 > 34kV/mm Copper Corrosion UL 224 Pass ASTM D 2671 Self-extinguish Fluid Resistance SAE-AMS-DTL-23053/12 Excellent Water Absorption ASTM D 570 < 0.1 Flammability 18 Product Dimensions After Recovered (mm) As Supplied (mm) Size (AWG) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag (48” pcs.) 20 1.52 0.97 0.30 25 18 1.93 1.17 0.30 25 16 2.36 1.45 0.30 25 14 3.05 1.82 0.30 25 12 3.81 2.26 0.30 25 10 4.85 2.80 0.30 25 8 6.10 3.55 0.38 5 6 7.67 4.40 0.38 5 4 9.40 5.45 0.38 5 2 10.92 6.90 0.38 5 0 11.94 8.56 0.38 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 26 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-2X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -45°C to +125°C Minimum shrink temperature: 100°C Full recovery temperature: 125°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear(non-flame retardant jacket) RoHS Compliant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 10.4 MPa (min.) Tensile Strength After Aging ASTM D 2671 158°C, 168 hrs., remains 70% Elongation at Break ASTM D 2671 200% (min.) Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 100% (min.) Longitudinal Shrinkage Heat Shock UL 224 0 ± 10% 250°C, 4 hrs. No cracking, no dropping Cold Bend ( -30°C, 1 hr.) ASTM D 2671 No cracking Voltage Withstand (AC 2500V, 60 seconds) ASTM D 2671 No breakdown Break Down Voltage ASTM D 2671 AC 2500V (min.) Volume Resistance ASTM D 876 Min. 10 Ω.cm (min.) SAE-AMS-DTL-23053/4 Self extinguish in 30 seconds Flammability Copper Corrosion (158°C, 168 hrs.) Water Absorption 14 UL 224 Pass ASTM D 570 < 0.5% Product Dimensions As Supplied (mm) Size After Recovered (mm) Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 1/8 3.2/1.6 3.20 1.6 0.70 0.20 200 28 25 3/16 4.8/2.4 4.80 2.4 0.70 0.20 100 24 25 1/4 6.4/3.2 6.40 3.2 0.75 0.20 100 20 25 3/8 9.5/4.8 9.50 4.8 0.75 0.20 50 16 25 1/2 12.7/6.4 12.70 6.4 0.75 0.20 25 14 5 3/4 19.1/9.6 19.10 9.5 0.90 0.20 25 12 5 1 25.4/12.7 25.40 12.7 1.10 0.20 25 8 5 1 1/2 38.1/19.0 38.10 19.0 1.10 0.20 25 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. 27 Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” www.Qualtekusa.com HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. It is designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery temperature: 110°C Approvals4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear(non-flame retardant jacket) RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >12 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% ASTM D 2671 < 40% 158°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 95°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” 1/8 3.0/1.0 3.0 1.0 1.00 0.5 200 28 25 3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25 1/4 6.0/2.0 6.0 2.0 1.00 0.5 100 20 25 3/8 9.0/3.0 9.0 3.0 1.40 0.6 50 16 24 1/2 12.0/4.0 12.0 4.0 1.60 0.8 25 14 5 3/4 19.0/6.0 19.0 6.0 2.15 0.8 25 12 5 1 24.0/8.0 24.0 8.0 2.40 1.0 25 8 5 1 1/4 30.0/10.0 30.0 10.0 2.40 1.0 25 5 5 1 1/2 40.0/13.0 40.0 13.0 2.40 1.0 25 5 5 2 50.0/19.0 50.0 19.0 2.40 1.0 25 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. www.Qualtekusa.com 28 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery temperature: 110°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >12 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% ASTM D 2671 < 40% 158°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 95°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 3/16 4/1 4.0 1.0 1.00 0.5 100 24 25 1/4 6/1.5 6.0 1.5 1.00 0.5 100 20 25 5/16 8/2 8.0 2.0 1.00 0.5 50 18 25 1/2 12/3 12.0 3.0 1.40 0.6 25 14 5 5/8 16/4 16.0 4.0 1.60 0.8 25 14 5 1 24/6 24.0 6.0 2.15 0.8 25 12 5 1 1/4 32/8 32.0 8.0 2.40 1.0 25 8 5 2 52/13 52.0 13.0 2.40 1.0 - 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. 29 Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” www.Qualtekusa.com HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-F3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Q5-F3X is manufactured by co-extrusion of polyolefin and meltable adhesive. It is designed to provide insulation and create a tight seal for protected articles. Typical applications are environmental sealing of electrical components such as wire splices and harnesses in the automotive and communication industry. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 110°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >13 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% ASTM D 2671 < 40% 158°C, 168 hrs. > 11 MPa > 300 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 > 10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 95°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size Inch After Recovered (mm) mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” 1/8 3/1 3.0 1.0 1.00 0.5 200 28 25 3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25 1/4 6/2 6.0 2.0 1.00 0.5 100 20 25 3/8 9/3 9.0 3.0 1.40 0.6 50 16 25 1/2 12/4 12.0 4.0 1.60 0.8 25 14 5 3/4 19/6 19.0 6.0 2.15 0.8 25 12 5 1 24/8 24.0 8.0 2.40 1.0 25 8 5 1 1/2 40/13 40.0 13.0 2.40 1.0 25 5 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. www.Qualtekusa.com 30 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-F4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Q5-F4X is manufactured by co-extrusion of polyolefin and meltable adhesive. It is designed to provide insulation and a tight seal for protected articles. Typical applications are environmental sealing of electrical components such as wire splices and harnesses in the automotive and communication industry. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 110°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259 Standard color: Black RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >13 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% ASTM D 2671 < 40% 158°C, 168 hrs. > 11 MPa > 300 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 > 10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 95°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 3/16 4/1 4.0 1.0 1.00 0.5 100 24 25 5/16 8/2 8.0 2.0 1.00 0.5 50 18 25 1/2 12/3 12.0 3.0 1.40 0.6 25 14 5 5/8 16/4 16.0 4.0 1.60 0.8 25 14 5 1 24/6 24.0 6.0 2.15 0.8 25 8 5 1 1/4 32/8 32.0 8.0 2.40 1.0 25 5 5 1 1/2 38.1/9.5 38.1 9.5 2.40 1.0 25 5 5 2 52/13 52.0 13.0 2.40 1.0 - 3 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Clear tubing is not flame retardant, UL or CSA approved. 31 Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” www.Qualtekusa.com HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING SHRINK RATIO 4:1 Features/Applications Specially designed for the protection of wires, terminals and other components against environmental damage. The semi-rigid composition makes it more abrasion resistant compared with most common tubing and the 4:1 shrink ratio fits a wide range of component diameters. With its thicker liner, it forms an effective barrier against fluids and moisture. Operating temperature: -55°C to +125°C Minimum shrink temperature: 110°C Full recovery temperature: 135°C Meets: SAE-AMS-DTL-23053/4, 600V Standard colors: Black and clear RoHS Compliant Technical Data Property Test Method Typical Data Tensile Strength ASTM D 2671 >16 MPa Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 >13 MPa Elongation at Break ASTM D 2671 >400% Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 >300% Longitudinal Shrinkage Heat Shock UL 224 0 ± 5% 250°C, 4 hrs. No cracking, no dropping Cold Bend ( -30°C, 1 hr.) ASTM D 2671 No cracking Breakdown Voltage ASTM D 2671 AC 2500V (min.) Volume Resistance ASTM D 2671 Flammability Copper Corrosion (158°C, 168 hrs.) >10 14 Ω.cm - Self extinguish in 30 seconds UL 224 Pass ASTM E 28 110°C ± 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions After Recovered (mm) As Supplied (mm) Size (mm) Standard Packaging Cut to Length Pcs. (QB)* Qty per bag 6” 48” Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Adhesive Thickness (nom.) 6/1.27 6 1.27 1.30 0.56 20 5 8/1.65 8 1.65 1.52 0.76 16 5 12/2.41 12 2.41 1.91 1.02 14 5 18/4.45 18 4.45 2.41 1.37 12 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. www.Qualtekusa.com 32 HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1 Features/Applications Manufactured using a specially designed coating technology. Designed to provide both insulation and create a tight seal for protected articles. Suitable for joints and terminations, it can also be used to protect auto wires, shipping cables, bundled wires and metal tubes against water and moisture especially in ship building. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery Temperature: 110°C Standard color: Black RoHS Compliant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 >14 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 -10% ASTM D 2671 < 30% 250°C, 168 hrs. > 12 MPa > 350 % Heat Shock 300°C, 4 hrs. No Cracking Flammability VW-1 Pass Dielectric Strength IEC 93 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >1014 Ω.cm Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 85°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 3/4 19/6 19 6 3.0 1.35 14 5 1 25/8 25 8 3.0 1.35 12 5 1 1/4 33/8 33 8 3.0 1.35 5 5 1 1/2 40/12 40 12 3.0 1.35 5 5 2 55/16 55 16 3.0 1.35 3 5 2 1/2 65/19 65 19 3.0 1.35 2 5 3 75/22 75 22 3.0 1.35 2 5 3 3/8 85/25 85 25 3.0 1.35 1 5 4 100/30 100 30 3.0 1.35 1 5 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request. 33 Standard Packaging Cut to Length Pcs. *(QB) Qty per bag 6” 48” www.Qualtekusa.com HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING , HOT MELT ADHESIVE-LINED SHRINK RATIO 6:1 Features/Applications Ideal for applications of extremely different diameter between cables, connectors and components. The high shrink ratio provides close fit to a wide variety of irregular shapes, connectors and figurations. Provides excellent mechanical protection to cable joints and terminations, complete environmental protection and is resistant to impact and abrasion. Operating temperature: -55°C to +110°C Minimum shrink temperature: 120°C Full recovery temperature: 120°C Standard color: Black RoHS Compliant Very high shrink ratio Resistant to UV radiation High electrical insulation Superior mechanical property Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 >14 MPa Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 > 12 MPa UL 224 0 ± 10% Elongation at Break ASTM D 2671 > 400% Elongation at Break After Aging (50°C, 168 hrs.) ASTM D 2671 > 300% Dielectric Strength IEC 243 > 18kV / mm Volume Resistance IEC 93 >13 Longitudinal Shrinkage 14 Ω.cm Copper Stability ASTM D 2671 Non-corrosive Heat Shock (225°C, 4hrs.) ASTM D 2671 No cracking or flowing Property Test Method Water Absorption Softening Point Peel Strength (PE) Resistance to Fungus and Decay Typical Data ISO 62 < 0.2% ASTM D E28 85°C ± 5°C DIN 30672 4N / cm ISO 846 Pass Product Dimensions After Recovered (mm) As Supplied (mm) Size (mm) Inside Diameter (min.) Inside Diameter (max.) Standard Packaging Wall Thickness (min.) Tubing Shape Cut to Length Pcs. *(QB) Qty per bag (48” pcs.) 19/3.2 19.0 3.2 3.2 Round 20 33/5.5 33.0 5.5 3.4 Round 20 44.4/7.4 44.4 7.4 3.6 Round 15 50.8/8.3 50.8 8.3 4.3 Round 15 69.8/11.7 69.8 11.7 4.8 Round 15 88.9/17.1 88.9 17.1 4.8 Round 15 119.4/22.9 119.4 22.9 4.8 Round 10 235/40 235.0 40.0 4.8 Round 10 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 3. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com 34 HEAT SHRINK MEDIUM/HEAVY WALL BUS BAR TUBING QBTM, QBTH HALOGEN FREE, HEAT SHRINKABLE, 24-36kV BUS BAR INSULATION PROTECTION TUBING Features/Applications Made from specially formulated radiation cross-linked halogen-free compounds. The carefully produced product can provide high resistance to tracking and arcing. Used to enhance the insulation properties of bus bar in switchgear and substations. The continuous length of supplied products makes it more convenient and economical. Operating temperature: -55°C to +105°C Minimum shrink temperature: 120°C RoHS Compliant Halogen free UV and weather resistant Technical Data Test Method Typical Data Tensile Strength Property ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 800% Longitudinal Shrinkage ASTM D 2671 0 to -10% Heat Aging Tensile Strength (120 °C, 168 hrs.) ASTM D 2671 > 10MPa Dielectric Strength IEC 243 > 19kV/mm Dielectric Constant IEC 250 < 3.5 Volume Resistance IEC 93 > 10 14 Ω .cm Ultimate Elongation > 200% Flammability (Oxygen Index) ISO 4589 > 25 UL 224 No corrosion ASTM D 2671 (-40°C, 4 hrs.) No cracking ISO 62 (23°C, 14 days) < 0.5% Copper Corrosion Cold Bend Water Absorption Product Dimensions Size (mm) QBTM-Medium Wall Bus Bar Tubing As Supplied (mm) Inside Diameter (min) After Recovered (mm) Inside Diameter (max) Wall Thickness (min) 24kV Tubing Shape Standard Spool *(SS) (Meter) Continuous Length Tubing 15/6 15 6 2.0 Flat 30 30/12 30 12 2.3 Flat 30 40/16 40 16 2.5 Flat 30 50/20 50 20 2.5 Flat 15 65/25 65 25 2.5 Flat 15 75/30 75 30 2.6 Flat 15 100/40 100 40 2.8 Flat 15 120/50 120 50 2.8 Flat Cut Length Tubing 150/60 150 60 3.3 Round 1000 180/60 180 60 3.3 Round 1000 205/75 205 75 3.8 Round 1000 235/75 235 75 3.8 Round 1000 Product Dimensions Size (mm) QBTH-Heavy Wall Bus Bar Tubing As Supplied (mm) Inside Diameter (min) After Recovered (mm) Inside Diameter (max) Wall Thickness (min) Tubing Shape 36kV Standard Spool *(SS) (Meter) 25/10 25 10 4.0 Flat 15 40/16 40 16 4.0 Flat 15 Standard Packaging *(QB) (mm) Cut Length Tubing 65/25 65 25 4.0 Round 1000 75/25 75 25 4.0 Round 1000 95/30 95 30 4.0 Round 1000 120/40 120 140 4.2 Round 1000 180/58 180 58 4.2 Round 1000 Notes: 1. * See page 12 - Part Number Guide for standard packaging codes. 2. Special sizes, packaging, and cut pieces are available upon request. 35 15 Standard Packaging *(QB) (mm) www.Qualtekusa.com END CAPS QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING Features/Applications QSEC offers an economical means of sealing the ends of power and control cables to ensure a watertight seal. The internal surface of the end caps has a layer of spiral coated hot melt adhesive, which retains its flexible properties after recovery. Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV radiation, etc. Operating temperature: -55°C to +110°C, 1000V Minimum shrink temperature: 120°C RoHS Compliant Protection against oxidation, ozone & UV radiation Easy to fit on cable end Ensures seal L Dw A D A-spiral hot melt adhesive Technical Data Property Test Method Typical Data IEC 216 -55°C to +110°C Operating Temperature Tensile Strength ASTM D 638 > 14 MPa Elongation at Break ASTM D 638 > 400% Density ASTM D 792 1.05 150°C, 168 hrs. > 300% Elongation at Break After Aging Dielectric Strength IEC 243 > 15kV/ mm Volume Resistance IEC 93 > 10 14 Ω.cm Product Dimensions Part Number As Supplied (mm) D (min) Recovered (mm) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%) For Cable Diameter (mm) Standard Packaging *(QB) (Qty) 200 Standard Length End Cap QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200 QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150 QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150 QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100 QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100 QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50 QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40 QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30 QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15 QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15 QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10 QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10 Extended Length End Cap QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200 QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100 QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50 QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50 QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40 QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40 QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30 Notes: 1. End cap with valve stem is available upon request. 2. * See page 12 - Part Number Guide for standard packaging codes. 3. Cross Reference Guide located on page 3. www.Qualtekusa.com 36 SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS QKITS, REFILL BAGS, Q BOX & MINI SPOOLS Q2-F TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / KITS 1 & 2 BLACK, KIT 4 ASSORTED COLORS THIN WALL, ENVIRONMENT FRIENDLY, HIGHLY FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5 SMALL SIZES P/N Q2-F-QK1-01-6IN-180 Q2-F Kit 1 consists of 180 pcs. Size Q2-F KIT 1 180 PCS. LARGE SIZES Inch mm 3/64 1/16 3/32 1/8 3/16 1/4 1.6 2.0 3.1 3.7 5.2 6.8 ASSORTED COLORS Inch mm 5/16 3/8 1/2 5/8 3/4 1 8.8 10.7 13.7 16.7 20.5 25.4 Color Black Black Black Black Black Black QTY Color 18 pcs. 16 pcs. 14 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black Inch mm 1/16 1/8 1/4 3/8 1/2 1 2.0 3.7 6.8 10.7 13.7 25.4 6” LENGTH Color 39 pcs. 31 pcs. 23 pcs. 19 pcs. 19 pcs. 10 pcs. Assorted Assorted Assorted Assorted Assorted Assorted Q2-F-RK1-3/64-01-6IN-40 Q2-F-RK1-1/16-01-6IN-36 Q2-F-RK1-3/32-01-6IN-32 Q2-F-RK1-1/8-01-6IN-28 Q2-F-RK1-3/16-01-6IN-24 Q2-F-RK1-1/4-01-6IN-20 6” LENGTH Q2-F-RK2-5/16-01-6IN-18 Q2-F-RK2-3/8-01-6IN-16 Q2-F-RK2-1/2-01-6IN-14 Q2-F-RK2-5/8-01-6IN-14 Q2-F-RK2-3/4-01-6IN-12 Q2-F-RK2-1-01-6IN-8 Q2-F-RK4-1/16-11-6IN-39 Q2-F-RK4-1/8-11-6IN-31 Q2-F-RK4-1/4-11-6IN-23 Q2-F-RK4-3/8-11-6IN-19 Q2-F-RK4-1/2-11-6IN-19 Q2-F-RK4-1-11-6IN-10 VARIOUS LENGTHS PER SIZE Part Number Q2-F-3/64-01-QX50FT Q2-F-1/16-01-QX50FT Q2-F-3/32-01-QX50FT Q2-F-1/8-01-QX50FT Q2-F-3/16-01-QX30FT Q2-F-1/4-01-QX30FT Q2-F-5/16-01-QX30FT Q2-F-3/8-01-QX30FT Q2-F-1/2-01-QX15FT Q2-F-5/8-01-QX15FT Q2-F-3/4-01-QX15FT Black Black Black Black Black Black QTY Color 18 pcs. 16 pcs. 14 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black QTY Color 39 pcs. 31 pcs. 23 pcs. 19 pcs. 19 pcs. 10 pcs. Assorted Assorted Assorted Assorted Assorted Assorted MINI SPOOLS Q BOX Q BOX Color Q2-F, Kit 4 Refill Bags Consist of 6” length pcs. Part Number 6” LENGTH QTY 40 pcs. 36 pcs. 32 pcs. 28 pcs. 24 pcs. 20 pcs. Q2-F, Kit 2 Refill Bags Consist of 6” length pcs. Part Number REFILL BAGS QTY Q2-F, Kit 1 Refill Bags Consist of 6” length pcs. Part Number REFILL BAGS P/N Q2-F-QK4-11-6IN-141 Q2-F Kit 4 consists of 141 pcs. Size Q2-F KIT 4 141 PCS. QTY 40 pcs. 36 pcs. 32 pcs. 28 pcs. 24 pcs. 20 pcs. P/N Q2-F-QK2-01-6IN-82 Q2-F Kit 2 consists of 82 pcs. Size Q2-F KIT 2 82 PCS. REFILL BAGS Box Size (Inch) Length (Feet) 3/64 1/16 3/32 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 Part Number Q2-F-3/64-01-MS100FT Q2-F-1/16-01-MS100FT Q2-F-3/32-01-MS100FT Q2-F-1/8-01-MS100FT Q2-F-3/16-01-MS100FT Q2-F-1/4-01-MS100FT Q2-F-5/16-01-MS100FT Q2-F-3/8-01-MS100FT Q2-F-1/2-01-MS100FT Q2-F-5/8-01-MS50FT Q2-F-3/4-01-MS50FT Q2-F-1-01-MS50FT Q2-F-1 1/2-01-MS50FT Q2-F-2-01-MS50FT 50 50 50 50 30 30 30 30 15 15 15 Size (Inch) Spool Length (Feet) 3/64 1/16 3/32 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1 1/2 2 100 100 100 100 100 100 100 100 100 50 50 50 50 50 Q2-F3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK THIN WALL, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5 ASSORTED SIZES Size Q2-F3X KIT 1 106 PCS. 37 REFILL BAGS P/N Q2-F3X-QK1-01-6IN-106 Q2-F3X Kit 1 consists of 106 pcs. Inch mm 1/16 1/8 1/4 1/2 3/4 1 2.0 3.7 6.8 10.7 13.7 25.4 Q2-F3X, Kit 1 Refill Bags Consist of 6” length pcs. QTY Color Part Number QTY Color 28 pcs. 24 pcs. 20 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black Q2-F3X-RK1-1/16-01-6IN-28 Q2-F3X-RK1-1/8-01-6IN-24 Q2-F3X-RK1-1/4-01-6IN-20 Q2-F3X-RK1-1/2-01-6IN-14 Q2-F3X-RK1-3/4-01-6IN-12 Q2-F3X-RK1-1-01-6IN-8 28 pcs. 24 pcs. 20 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black 6” LENGTH www.Qualtekusa.com SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS QKITS & REFILL BAGS Q2-Z TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK THIN WALL, GENERAL PURPOSE, FLAME RETARDANT, POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C SMALL SIZES P/N Q2-Z-QK1-01-6IN-180 Q2-Z Kit 1 consists of 180 pcs. Size Q2-Z KIT 1 180 PCS. LARGE SIZES Inch mm 3/64 1/16 3/32 1/8 3/16 1/4 1.6 2.0 3.1 3.7 5.2 6.8 QTY Color 40 pcs. 36 pcs. 32 pcs. 28 pcs. 24 pcs. 20 pcs. Black Black Black Black Black Black P/N Q2-Z-QK2-01-6IN-82 Q2-Z Kit 2 consists of 82 pcs. Size Q2-Z KIT 2 82 PCS. REFILL BAGS Inch mm 5/16 3/8 1/2 5/8 3/4 1 8.8 10.7 13.7 16.7 20.5 25.4 Part Number 6” LENGTH REFILL BAGS QTY Color 18 pcs. 16 pcs. 14 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black Q2-Z, Kit 1 Refill Bags Consist of 6” length pcs. Q2-Z-RK1-3/64-01-6IN-40 Q2-Z-RK1-1/16-01-6IN-36 Q2-Z-RK1-3/32-01-6IN-32 Q2-Z-RK1-1/8-01-6IN-28 Q2-Z-RK1-3/16-01-6IN-24 Q2-Z-RK1-1/4-01-6IN-20 Color 40 pcs. 36 pcs. 32 pcs. 28 pcs. 24 pcs. 20 pcs. Black Black Black Black Black Black QTY Color 18 pcs. 16 pcs. 14 pcs. 14 pcs. 12 pcs. 8 pcs. Black Black Black Black Black Black QTY Color 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black QTY Color 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black Q2-Z, Kit 2 Refill Bags Consist of 6” length pcs. Part Number 6” LENGTH QTY Q2-Z-RK2-5/16-01-6IN-18 Q2-Z-RK2-3/8-01-6IN-16 Q2-Z-RK2-1/2-01-6IN-14 Q2-Z-RK2-5/8-01-6IN-14 Q2-Z-RK2-3/4-01-6IN-12 Q2-Z-RK2-1-01-6IN-8 Q5-2X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-2X-QK1-01-6IN-114 Q5-2X Kit 1 consists of 114 pcs. Size Q5-2X KIT 1 114 PCS. Inch mm 1/8 3/16 1/4 3/8 1/2 3/4 3.7 5.2 6.8 10.7 13.7 20.5 REFILL BAGS QTY Color 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black Q5-2X, Kit 1 Refill Bags Consist of 6” length pcs. Part Number 6” LENGTH Q5-2X-RK1-1/8-01-6IN-28 Q5-2X-RK1-3/16-01-6IN-24 Q5-2X-RK1-1/4-01-6IN-20 Q5-2X-RK1-3/8-01-6IN-16 Q5-2X-RK1-1/2-01-6IN-14 Q5-2X-RK1-3/4-01-6IN-12 Q5-3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-3X-QK1-01-6IN-114 Q5-3X Kit 1 consists of 114 pcs. Size Q5-3X KIT 1 114 PCS. Inch mm 1/8 3/16 1/4 3/8 1/2 3/4 3.7 5.2 6.8 10.7 13.7 20.5 REFILL BAGS QTY Color 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black Q5-3X, Kit 1 Refill Bags Consist of 6” length pcs. Part Number 6” LENGTH Q5-3X-RK1-1/8-01-6IN-28 Q5-3X-RK1-3/16-01-6IN-24 Q5-3X-RK1-1/4-01-6IN-20 Q5-3X-RK1-3/8-01-6IN-16 Q5-3X-RK1-1/2-01-6IN-14 Q5-3X-RK1-3/4-01-6IN-12 Q5-F3X TYPE TUBING KIT, 6” LENGTH PCS. ASSORTED SIZES / BLACK DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4 ASSORTED SIZES P/N Q5-F3X-QK1-01-6IN-114 Q5-F3X Kit 1 consists of 114 pcs. Size Q5-F3X KIT 1 114 PCS. Inch mm 1/8 3/16 1/4 3/8 1/2 3/4 3.7 5.2 6.8 10.7 13.7 20.5 REFILL BAGS Q5-F3X, Kit 1 Refill Bags Consist of 6” length pcs. QTY Color Part Number QTY Color 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black Q5-F3X-RK1-1/8-01-6IN-28 Q5-F3X-RK1-3/16-01-6IN-24 Q5-F3X-RK1-1/4-01-6IN-20 Q5-F3X-RK1-3/8-01-6IN-16 Q5-F3X-RK1-1/2-01-6IN-14 Q5-F3X-RK1-3/4-01-6IN-12 28 pcs. 24 pcs. 20 pcs. 16 pcs. 14 pcs. 12 pcs. Black Black Black Black Black Black 6” LENGTH www.Qualtekusa.com 38 39 MARKER CABLE TIES 11 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC APPROVALS1 : Part Number Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] Write Area mm [Inch] M - 18lb TYPE A 11-M100 2.5 [.098] 100 [4.0] 22.0 [0.86] 8 [18] 7.75x24.5 [0.30x0.95] 11-M200 2.5 [.098] 200 [8.0] 53.9 [2.12] 8 [18] 7.75x24.5 [0.30x0.95] 110 [4.3] 22.6 [0.89] 8 [18] 9.0x20 [0.35x0.78] 190 [7.0] 50.9 [2.00] 22 [50] 12.9x27 [0.50x1.05] M - 18lb TYPE C 11-M110 2.5 [.098] S - 50lb TYPE B 11-S190 4.8 [.189] Note: 1. 11-M110 and 11-M200 are not UL approved Cross Reference Guide located on pages 4-8. TYPE A TYPE B PART NUMBER SYSTEM TYPE C M 200 B C SERIES CROSS SECTION LENGTH MATERIAL/COLOR LENGTH LENGTH LENGTH 11 N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH WIDTH WIDTH www.Qualtekusa.com 40 DOUBLE LOOP CABLE TIES 12 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] 200 [7.9] 57.1 [2.15] 22 [50] 300 [11.8] 85.3 [3.36] 22 [50] Width mm [Inch] Length mm [Inch] 12-S200 4.8 [.189] 12-S300 4.8 [.189] Part Number S - 50lb Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 12 S 200 B C LENGTH SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH 41 www.Qualtekusa.com BEADED CABLE TIES 13 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Length mm [Inch] Max Bundle Diameter mm [Inch] 2.5 [.095] 100 [4.0] 25.0 [0.98] 13-150 2.5 [.095] 150 [6.0] 36.0 [1.41] 13-200 2.5 [.095] 200 [8.0] 51.9 [2.04] Part Number Ball Diameter mm [Inch] HEAD TYPE A 13-100 HEAD TYPE B Note: Cross Reference Guide located on pages 4-8. HEAD TYPE A HEAD TYPE B PART NUMBER SYSTEM 13 200 B C SERIES LENGTH PACKAGE SIZE C: 100PCS Number: Other Quantity LENGTH N: Natural B: Normal UV Black LENGTH MATERIAL/COLOR BA DI LL AM ET ER BA DI LL AM ET ER www.Qualtekusa.com 42 DOUBLE LOOP BEADED CABLE TIES 14 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Max Bundle Diameter mm [Inch] Ball Diameter mm [Inch] Length mm [Inch] 14-S210 4.5 [.177] 210 [8.0] 53.5 [2.10] 22 [50] 14-S310 4.5 [.177] 310 [12.0] 83.8 [3.30] 22 [50] Part Number Min Loop Tensile Kg [lb] S - 50lb HD - 120lb 14-HD460 6.5 [.255] 460 [18.0] 129.5 [5.10] 55 [120] 14-HD610 6.5 [.255] 610 [24.0] 175.2 [6.90] 55 [120] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 14 S 210 B C LENGTH SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity BALL DIAMETER 43 www.Qualtekusa.com CABLE TIES RUBBER ADHESIVE MOUNTING BASE 15 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC APPROVALS1 : Part Number Length mm [Inch] Width mm [Inch] Screw Size Cable Ties Width up to mm [Inch] 15-1919 19.0 [.750] 19.0 [.750] M5 [#10] 3.6 [.140] 15-2525 28.0 [1.10] 28.0 [1.10] M5 [#10] 4.8 [.189] 15-4040 40.0 [1.50] 40.0 [1.50] M5 [#10] 9.0 [.354] Note: 1. 15-4040 is not UL approved Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 15 1919 B WIDTH C LENGTH SERIES SIZE SCREW SIZE MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity www.Qualtekusa.com 44 CABLE TIES SCREW MOUNT BASE 16 Series NYLON 6.6 GENERAL PURPOSE APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC Width mm [Inch] Diameter mm [Inch] Cable Ties Width up to mm [Inch] 6.80 [.267] 3.30 [.130] 4.8 [.189] 8.20 [.320] 4.31 [.170] 4.8 [.189] Part Number Length mm [Inch] Height mm [Inch] 16-1509 15.2 [.600] 9.4 [.370] 16-1712 17.8 [.700] 12.7 [.500] 16-2216 22.0 [.870] 16.2 [.640] 9.60 [.385] 5.20 [.205] 7.6 [.300] 16-2516 25.4 [1.00] 16.2 [.640] 10.80 [.425] 5.20 [.205] 9.0 [.354] Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 1509 B C WIDTH 16 LENGTH SERIES SIZE MATERIAL/COLOR N: Natural B: Normal UV Black DIAMETER PACKAGE SIZE HEIGHT C: 100PCS Number: Other Quantity 45 www.Qualtekusa.com STANDARD NYLON CABLE TIES 17 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS1 : Part Number Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] M - 18lb 17-M80 2.5 [.098] 80 [3.2] 14.0 [0.55] 8 [18] 17-M100 2.5 [.098] 100 [4.0] 20.5 [0.80] 8 [18] 17-M120 2.5 [.098] 120 [4.7] 27.0 [1.06] 8 [18] 17-M130 2.5 [.098] 130 [5.0] 30.0 [1.18] 8 [18] 17-M150 2.5 [.098] 150 [6.0] 36.5 [1.43] 8 [18] 17-M160 2.5 [.098] 160 [6.3] 39.8 [1.56] 8 [18] 17-M200 2.5 [.098] 200 [8.0] 52.5 [2.06] 8 [18] 17-M260 2.5 [.098] 260 [10.2] 71.6 [2.81] 8 [18] I - 40lb 17-I140 3.6 [.14] 140 [5.5] 33.0 [1.30] 18 [40] 17-I150 3.6 [.14] 150 [6.0] 36.0 [1.41] 18 [40] 17-I180 3.6 [.14] 180 [7.0] 46.0 [1.81] 18 [40] 17-I200 3.6 [.14] 200 [8.0] 52.5 [2.06] 18 [40] 17-I250 3.6 [.14] 250 [10.0] 68.0 [2.67] 18 [40] 17-I280 3.6 [.14] 280 [11.0] 78.0 [3.07] 18 [40] 17-I300 3.6 [.14] 300 [11.8] 84.0 [3.30] 18 [40] 17-I370 3.6 [.14] 370 [14.5] 106.0 [4.17] 18 [40] 17-S120 4.6 [.181] 120 [4.7] 23.8 [0.93] 22 [50] 17-S160 4.6 [.181] 160 [6.3] 36.6 [1.32] 22 [50] 17-S180 4.8 [.189] 180 [7.0] 43.0 [1.68] 22 [50] 17-S190 4.8 [.189] 190 [7.5] 46.0 [1.81] 22 [50] 17-S200 4.8 [.189] 200 [8.0] 49.5 [1.94] 22 [50] 17-S250 4.8 [.189] 250 [10.0] 65.0 [2.55] 22 [50] 17-S280 4.8 [.189] 280 [11.0] 74.8 [2.94] 22 [50] 17-S300 4.8 [.189] 300 [11.8] 81.0 [3.18] 22 [50] 17-S350 4.8 [.189] 350 [13.7] 97.0 [3.81] 22 [50] 17-S360 4.8 [.189] 360 [14.0] 100.0 [3.93] 22 [50] 17-S370 4.8 [.189] 370 [14.5] 103.5 [4.07] 22 [50] 17-S380 4.8 [.189] 380 [15.0] 106.7 [4.20] 22 [50] 17-S390 4.8 [.189] 390 [15.3] 110.0 [4.33] 22 [50] 17-S400 4.8 [.189] 400 [15.7] 113.1 [4.45] 22 [50] 17-S430 4.8 [.189] 430 [17.0] 122.5 [4.82] 22 [50] 17-S450 4.8 [.189] 450 [17.7] 129.0 [5.07] 22 [50] 17-S500 4.8 [.189] 500 [19.7] 145.0 [5.70] 22 [50] 17-S550 4.8 [.189] 550 [21.6] 160.9 [6.33] 22 [50] 17-HD150 7.6 [.300] 150 [6.0] 35.0 [1.37] 55 [120] 17-HD200 7.6 [.300] 200 [8.0] 50.9 [2.00] 55 [120] 17-HD220 7.6 [.300] 220 [8.6] 57.2 [2.25] 55 [120] 17-HD250 7.6 [.300] 250 [10.0] 66.8 [2.62] 55 [120] 17-HD300 7.6 [.300] 300 [11.8] 82.8 [3.25] 55 [120] 17-HD350 7.6 [.300] 350 [13.7] 98.5 [3.87] 55 [120] 17-HD365 7.6 [.300] 365 [14.0] 103.5 [4.07] 55 [120] 17-HD380 7.6 [.300] 380 [15.0] 108.0 [4.25] 55 [120] 17-HD400 7.6 [.300] 400 [15.7] 114.5 [4.50] 55 [120] 17-HD450 7.6 [.300] 450 [17.0] 130.5 [5.13] 55 [120] 17-HD540 7.6 [.300] 540 [21.0] 159.0 [6.25] 55 [120] 17-HD550 7.6 [.300] 550 [21.6] 162.5 [6.39] 55 [120] 17-HD750 7.6 [.300] 750 [29.5] 226.1 [8.90] 55 [120] LENGTH S - 50lb HD - 120lb Note: 1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB, 17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT, 17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB, are not UL approved Material/Color LT and V0 are not UL approved Cross Reference Guide located on pages 4-8. www.Qualtekusa.com WIDTH Continued on next page 46 STANDARD NYLON CABLE TIES 17 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS1 : Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] 400 [15.7] 115.0 [4.52] 80 [175] 450 [18.0] 130.5 [5.13] 80 [175] 8.8 [.345] 500 [19.7] 146.5 [5.76] 80 [175] 17-EHD550 8.8 [.345] 550 [21.6] 163.5 [6.43] 80 [175] 17-EHD610 8.8 [.345] 610 [24.0] 181.5 [7.14] 80 [175] 17-EHD750 8.8 [.345] 750 [29.5] 226.5 [8.91] 80 [175] 17-EHD760 8.8 [.345] 760 [30.0] 229.5 [9.03] 80 [175] 17-EHD780 8.8 [.345] 780 [30.5] 235.5 [9.27] 80 [175] 17-EHD810 9.0 [.350] 810 [32.0] 245.0 [9.64] 80 [175] 17-EHD920 9.0 [.350] 920 [36.0] 280.0 [11.0] 80 [175] 17-EHD1220 9.0 [.350] 1220 [48.0] 375.5 [14.7] 80 [175] Width mm [Inch] Length mm [Inch] 17-EHD400 8.8 [.345] 17-EHD450 8.8 [.345] 17-EHD500 Part Number EHD - 175lb HSD - 250lb 17-HSD530 12.4 [.490] 530 [21.0] 156.0 [5.90] 110 [250] 17-HSD650 12.4 [.490] 650 [25.5] 195.0 [7.60] 110 [250] 17-HSD1000 12.4 [.490] 1000 [40.0] 305.0 [12.0] 110 [250] 17-HSD1030 12.4 [.490] 1030 [40.5] 315.0 [12.4] 110 [250] PART NUMBER SYSTEM 17 EHD 610 B M LENGTH Note: Cross Reference Guide located on pages 4-8. 1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB, 17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT, 17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB, are not UL approved Material/Color LT and V0 are not UL approved Cross Reference Guide located on pages 4-8. SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural WH: White B: Normal UV Black UVB: Weather Resistant Black HSB: Heat Stabilized Black HSN: Heat Stabilized Natural HT: High Heat Resistant Natural LT: Low Temperature Resistant Natural V0: Flame Retardant Natural G: Green BL: Blue Y: Yellow R: Red P: Purple BR: Brown GR: Gray O: Orange FG: Fluorescent Green FY: Fluorescent Yellow FB: Fluorescent Blue FO: Fluorescent Orange S: Silver PACKAGE SIZE L: 50PCS C: 100PCS D: 500PCS M: 1000PCS Number: Other Quantity 47 WIDTH www.Qualtekusa.com MOUNTING HOLE CABLE TIES 18 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS1 : Part Number Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] Fastener M - 18lb 18-M110 2.5 [.098] 110 [4.3] 19.0 [0.75] 8 [18] M2.5 [#4] 3.6 [.14] 150 [6.0] 35.5 [1.40] 18 [40] M4 [#8] M5 [#10] I - 40lb 18-I150 S - 50lb 4.8 [.189] 160 [6.3] 36.8 [1.45] 22 [50] 4.8 [.189] 200 [8.0] 49.8 [1.96] 22 [50] M5 [#10] 18-S305 4.8 [.189] 305 [12.0] 82.8 [3.26] 22 [50] M5 [#10] 18-S370 4.8 [.189] 370 [14.5] 103.8 [4.09] 22 [50] M5 [#10] 18-HD305 7.6 [.300] 305 [12.0] 78.7 [3.10] 55 [120] M6 [#1/4] 18-HD400 7.6 [.300] 400 [15.7] 109.2 [4.30] 55 [120] M6 [#1/4] FASTENER 18-S160 18-S200 HD - 120lb Note: 1. 18-M110, is not UL approved Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 18 HD 400 B C LENGTH SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH www.Qualtekusa.com 48 RELEASABLE PAWL TYPE CABLE TIES 19 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] 3.6 [.14] 100 [4.0] 22.6 [0.89] 18 [40] 19-S160 4.8 [.189] 160 [6.3] 41.9 [1.65] 22 [50] 19-S200 4.8 [.189] 200 [8.0] 54.8 [2.16] 22 [50] 19-S305 4.8 [.189] 305 [12.0] 88.1 [3.47] 22 [50] 19-S380 4.8 [.189] 380 [15.0] 111.0 [4.39] 22 [50] Part Number Width mm [Inch] I - 40lb 19-I100 S - 50lb Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 19 S 200 B C LENGTH SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH 49 www.Qualtekusa.com RELEASABLE TRIGGER TYPE CABLE TIES 20 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS: Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] 20-S150 7.6 [.300] 150 [6.0] 40.3 [1.59] 22 [50] 20-S200 7.6 [.300] 200 [8.0] 55.6 [2.19] 22 [50] 20-S250 7.6 [.300] 250 [10.0] 71.8 [2.83] 22 [50] 20-S300 7.6 [.300] 300 [11.8] 88.1 [3.47] 22 [50] 20-S370 7.6 [.300] 370 [14.5] 109.9 [4.33] 22 [50] Part Number S - 50lb Note: Cross Reference Guide located on pages 4-8. PART NUMBER SYSTEM 20 S 200 B C LENGTH SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity WIDTH www.Qualtekusa.com 50 PUSH MOUNT CABLE TIES 21 Series NYLON 6.6 GENERAL PURPOSE MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC APPROVALS1 : Part Number Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] M - 18lb 21A-M100 2.5 [.098] 100 [4.0] 21.6 [0.85] 8 [18] 3.6 [.140] 155 [6.0] 37.9 [1.49] 18 [40] 21A-S100 4.8 [.189] 100 [4.0] 21.6 [0.85] 22 [50] 21A-S130 4.8 [.189] 130 [5.1] 30.7 [1.21] 22 [50] 21A-S200 4.8 [.189] 200 [8.0] 50.0 [1.97] 22 [50] 21B-S200 4.8 [.189] 200 [8.0] 50.8 [2.00] 22 [50] I - 40lb 21B-I155 S - 50lb PART NUMBER SYSTEM 21A S 200 B C Note: 1. 21B-I155 is not UL approved Cross Reference Guide located on pages 4-8. SERIES CROSS SECTION LENGTH MATERIAL/COLOR N: Natural B: Normal UV Black PACKAGE SIZE C: 100PCS Number: Other Quantity W2 W1 D1 WIDTH 21A SERIES Part Number W1 W2 D1 mm [Inch] mm [Inch] mm [Inch] 21A-M100 5.58 [.220] 18.4 [.725] 3.55 [.140] 21A-S100 8.38 [.330] 18.9 [.745] 4.60 [.181] 21A-S130 8.38 [.330] 18.9 [.745] 4.60 [.181] 21A-S200 7.62 [.300] 17.1 [.675] 4.60 [.181] LENGTH WIDTH D1 W1 21B SERIES LENGTH 51 www.Qualtekusa.com W1 D1 mm [Inch] mm [Inch] 21B-I155 5.97 [.235] 3.55 [.140] 21B-S200 7.60 [.300] 4.44 [.175] Part Number STAINLESS STEEL CABLE TIES 22 Series SELF-LOCKING BALL LOCK HEAD DESIGN PROVIDES A STRONG, DURABLE METHOD OF CABLE BUNDLING CAN BE USED IN A WIDE RANGE OF INDOOR, OUTDOOR AND UNDERGROUND APPLICATIONS 304 STAINLESS STEEL FOR GENERAL PURPOSE APPLICATIONS 316 STAINLESS STEEL FOR CORROSIVE ENVIRONMENTS OPERATING TEMPERATURE: -80ºC to +538ºC APPROVALS1 : Part Number Width mm [Inch] Length mm [Inch] Max Bundle Diameter mm [Inch] Min Loop Tensile Kg [lb] S - 200lb 22-S125 4.6 [.180] 125 [5.0] 38.0 [1.49] 90 [200] 22-S150 4.6 [.180] 150 [6.0] 46.0 [1.81] 90 [200] 22-S200 4.6 [.180] 200 [8.0] 61.9 [2.43] 90 [200] 22-S260 4.6 [.180] 260 [10.0] 81.0 [3.19] 90 [200] 22-S290 4.6 [.180] 290 [11.5] 90.6 [3.56] 90 [200] 22-S360 4.6 [.180] 360 [14.0] 112.8 [4.44] 90 [200] 22-S520 4.6 [.180] 520 [20.5] 163.8 [6.45] 90 [200] 22-S680 4.6 [.180] 680 [27.0] 214.8 [8.45] 90 [200] 22-S840 4.6 [.180] 840 [33.0] 265.7 [10.46] 90 [200] ▲ H - 350lb 22-H200 7.9 [.310] 200 [8.0] 61.9 [2.43] 160 [350] 22-H260 7.9 [.310] 260 [10.0] 81.0 [3.19] 160 [350] 22-H290 7.9 [.310] 290 [11.5] 90.6 [3.56] 160 [350] 22-H360 7.9 [.310] 360 [14.0] 112.8 [4.44] 160 [350] 22-H520 7.9 [.310] 520 [20.5] 163.8 [6.45] 160 [350] 22-H680 7.9 [.310] 680 [27.0] 214.8 [8.45] 160 [350] 22-H840 7.9 [.310] 840 [33.0] 265.7 [10.46] 160 [350] 22-EH290 12 [.485] 290 [11.5] 90.6 [3.56] 235 [500] 22-EH360 12 [.485] 360 [14.0] 112.8 [4.44] 235 [500] 22-EH520 12 [.485] 520 [20.5] 163.8 [6.45] 235 [500] 22-EH680 12 [.485] 680 [27.0] 214.8 [8.45] 235 [500] 22-EH840 12 [.485] 840 [33.0] 265.7 [10.46] 235 [500] Note: 1. 22-H260, 22-EH290C, 22-EH360C, 22-EH520C, 22-EH680C, 22-EH840C, 22-EH290D, 22-EH360D, 22-EH520D, 22-EH680D, 22-EH840D are not UL approved Cross Reference Guide located on pages 4-8. LENGTH EH - 500lb PART NUMBER SYSTEM 22 EH 680 A C SERIES CROSS SECTION LENGTH MATERIAL/COLOR ▲ A: 304 Stainless Steel B: 316 Stainless Steel C: 304 Epoxy Coated Stainless Steel D: 316 Epoxy Coated Stainless Steel ▲ ▲ PACKAGE SIZE WIDTH C: 100PCS Number: Other Quantity www.Qualtekusa.com 52 Product Profile Fan-S Division AC & DC Fans and Accessories Low cost, high tech AC & DC axial fans with sizes ranging from 25mm - 280 mm, DC voltages from 3.3VDC - 60VDC and AC voltages from 115VAC - 230VAC and many special features such as IP55, IP56M, and IP67 rated, GR487 salt fog rated, speed sensors, alarm functions and much more upon request. Each fan is offered with a variety of bearing types : 2-ball, 1-ball 1-sleeve, sleeve only, and our newly developed hydro dynamic bearing with better performance than sleeve and lower cost than 2 ball bearings. Every fan is available with a wide range of speeds from ultra low to super high speed. Our fan accessories are famous worldwide and consist of wire form and plastic guards, plastic air filters, aluminum and stainless steel air filters, fan cords, and our patented noise reduction vibration sleeves. Primary Power Components Division AC Receptacles A complete line of inlets, outlets, multifunction modules with major international approval marks thus assuring high safety standards and help customers comply with international regulations. Modern production methods enable us to manufacture cost-effective and reliable components. A full range of products are maintained in inventory for quick on-time deliveries. Custom designs are available upon request. Circuit Breakers QLB and QMB series are compact and cost effective thermal circuit breakers with a wide range of amp ratings from 3A - 40A and offered in single pole and push-to-reset with safety agency certifications. We offer a large variety of bushing types, terminals, name plates, button colors and printing with custom configurations available. EMI Filters EMI/RFI power line filters are designed to meet most international safety agency requirements. These filters help customers meet FCC and VDE emission standards. Our line consists of many standard configurations such as block type, filter with power line connector, and various filters with multifunctional modules. Custom designs are available upon request. Power Cords A large selection of North American and International Power Cords that have been designed to comply with North American and international safety agency regulations to insure safe and reliable products. Offered in a wide selection of plugs and connectors available in various cable insulations, voltage ratings, colors, lengths, shielding and a full range of hospital grade certified power cords. Custom configurations and strain reliefs are available upon request. Power Supplies A full range of low cost, high reliability and energy saving switch mode AC/DC power supplies consisting of enclosed, open frame, din rail, wall mount, desktop, medical approved, and waterproof LED drivers; our enclosed versions are rated from 15W - 800W, open frame from 20W - 125W, desktop and wall mount from 5W - 200W, and LED drivers with constant current 25W - 200W and constant voltage 25W - 300W. All models have universal voltage input and a variety of output voltages ranging from 3.3V - 445V and some models include power factor correction to increase efficiency and reduce power losses. All of our power supplies meet or exceed the RoHS EU and the Chinese directives and are certified with worldwide safety agencies to ensure a safe and reliable product. Wire Management, Cable Assemblies & Interconnect Division Cable Assemblies We offer a wide selection of standard and custom cable assemblies, specializing in DVI, HDMI, USB and Fiber Optic and also producing flat ribbon cables, monitor cables, networking cables and an extensive offering of custom cable assemblies and wire harnesses. Cable Ties & Accessories Our low cost, high reliability cable nylon ties are available in a variety of styles including miniature, intermediate, standard and heavy duty. Specialty cable ties include releasable pawl type, stainless steel ball lock, head mount, push mount, marker ties, double loop, beaded and 4-way cable tie mounts. Cable ties are available in various material types including ultraviolet, heat stabilized, fire retardant and also are available in a range of colors. Custom designs and colors available upon request. Heat Shrink Products Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insulation, molded parts and end caps, cold shrink, wide range of shrink tubing kits and heat shrinkable cable and wire identification tubing. International Procurement Services Division Procurement Services With over 30 years of global business experience, Qualtek’s IPS division provides a complete range of services from component sourcing to complete turnkey projects. With our extensive knowledge of the major global manufacturing regions, this enables us to have access to the newest technology, highest quality, and the most cost effective production methods. 7610 Jenther Dr. * Mentor, Ohio 44060 * USA Telephone: 1.440.951.3300 * Fax: 1.440.951.7252 E-mail: [email protected] Web: www.Qualtekusa.com HST-0500