HEAT SHRINK THIN WALL TUBING Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY FLAME RETARDANT POLYOLEFIN TUBING SHRINK RATIO 2:1 Features/Applications Typically used where rapid shrinking and space saving is important. Low shrink temperature further reduces installation time and risk of damage to temperature sensitive components. Low heavy metal content lobal environmental standards. Operating temperature: -55°C to +125°C Minimum shrink temperature: 70°C Full recovery temperature: 100°C Approvals4 : File No. E236137, File No. 242540, 125°C, VW-1, 300V Meets: Sony-SS-00259 Material: No PBB’s, PBBO’s, PBBE’s Cadmium content: <5 ppm, Lead content: <30 ppm Standard color: Black Other colors are available upon request RoHS Compliant Technical Data Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 > 14 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 + 5% ASTM D 2671 < 30% 158°C, 168 hrs. > 350% Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Dielectric Strength IEC 243 > 20 kV / mm Voltage Withstand ASTM D 2671 / AC 2500V, 1 min. No Breakdown Volume Resistance ASTM D 2671 > 1014 Ω.cm Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion Product Dimensions As Supplied (mm) Size (Inch) Inside Diameter (min.) Product Dimensions After Recovered (mm) Inside Diameter (max.) Wall Thickness (min.) Standard Packaging Mini Spool *(MS) Standard Spool *SS (Feet) (Feet) As Supplied (mm) After Recovered (mm) Standard Spool *(SS) (Meter) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) 1.0 1.0 0.50 0.20 200 1.5 1.5 0.75 0.20 200 48” 2.0 2.0 1.00 0.20 200 Cut to Length Pcs. *(QB) Qty per bag 6” Size (mm) 3/64 1.2 0.60 0.20 100 1000 40 25 2.5 2.5 1.25 0.25 200 1/16 1.6 0.80 0.20 100 1000 36 25 3.0 3.0 1.50 0.25 200 25 3.5 3.5 1.75 0.25 200 25 4.0 4.0 2.00 0.25 200 3/32 1/8 2.4 3.2 1.20 1.60 0.25 0.25 100 100 500 500 32 28 3/16 4.8 2.40 0.25 100 500 24 25 5.0 5.0 2.50 0.28 100 1/4 6.4 3.20 0.28 100 500 20 25 6.0 6.0 3.00 0.28 100 7.0 3.50 0.28 100 3/8 9.5 4.80 0.28 100 250 16 25 7.0 1/2 12.7 6.40 0.28 100 200 14 5 8.0 8.0 4.00 0.28 100 9.0 9.0 4.50 0.28 100 10.0 10.0 5.00 0.28 100 Notes: 1. * See Part Number Guide for standard packaging codes. 2. Cross Reference Guide available. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. UL and CSA Approvals only for black color. www.Qualtekusa.com