REVISION DESCRIPTION Changed HDMI/M Mold Design / Changed from Crimp Terminal to Solder Terminal Graphics and Notes Update REV. A B 1830 ± 50 11 12 13 14 3 9 1 4 5 6 7 10 15 9 CN2 8 CN1 16 3.8 ± 0.3 DVI (18+1)P/M ASS’Y TYPE HDMI/M MOLDED TYPE TAPE 16 18 P/N:1721007-06 HDMI TYPE A-DVI (18+1) 3 1 2 6 4 5 9 7 8 ORANGE WHITE DRAIN BLACK WHITE DRAIN YELLOW WHITE DRAIN 1 2 3 9 10 11 17 18 19 CONTROLLED PARTS NAME QTY REMARKS SPECIFICATION STANDARD BRASS / GOLD FLASH 19 HDMI/M - INSULATOR PBT / BLACK 1 3 HDMI/M - SHELL STEEL / NICKEL PLATED 1 4 PCB 5 HDMI/M - INNER MOLD PE NATURAL 1 6 HDMI/M - COPPER FOIL WIDTH: 20mm 1 7 HDMI/M - OUTER MOLD 60P PVC / COLOR: BLACK 1 8 DVI (18+1)P/M - CONTACT BRONZE / GOLD FLASH SOLDER TYPE 19 CN2 9 DVI (18+1)P/M - INSULATOR THERMOPLASTIC / BLACK UL94-V0 1 10 12 11 15 WHITE RED DRAIN WHITE 23 24 22 6 10 DVI (18+1)P/M - SHELL STEEL NICKEL PLATED 1 11 CAN STEEL TIN PLATED ID: 8.0mm 1 12 DVI (18+1)P/M - COVER 45P PVC / COLOR: BLACK 1 16 18 17 YELLOW RED BLACK 7 14 15 13 THUMB SCREW #4-40 2.8x45, NICKEL PLATED 2 14 SCREW-MOLD 35P PVC / COLOR: BLACK 2 15 CABLE KL03006ABK01A 1 19 BROWN 16 MINI TIE PE / BLACK 2 SHELL BRAID 17 POLYBAG PE / 0.8x180x200mm 1 18 LABEL WHITE BOTTOM BLACK WORD 1 50 ± 2 PIN OUT CN1 CN2 CN1 No. HDMI/M - CONTACT Length: 6FT Color: Black Length: 6FT Color: Black FRONT 2 P/N:1721007-06 HDMI TYPE A-DVI (18+1) 17 DP 1 LABEL 100 ± 2 140 ± 20 01-28-08 24 C5 FRONT APPROVED DP THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. 17 8 DATE 03-12-07 NOTES: 1. CABLE: UL20276 [(28AWGx1P+DW+AL)x4+28AWGx3C+28AWG+1P+MYLAR+FOIL+BD]x1 OUTER PVC JACKET: BLACK, OD: 7.0 ± 0.2mm CHARACTER IMPEDENCE: 100 ohm PRINTING: “E166307 AWM STYLE 20276 28AWG 80°C 30V VW-1 LOW VOLTAGE COMPUTER CABLE” 2. CONNECTORS: HDMI MALE TO DVI (18+1) MALE. 3. HOOD: MOLDED TYPE, COLOR: BLACK COPPER FOIL MUST BE SOLDERED 360° AROUND THE CONNECTOR SHELL 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PCS/POLYBAG 16 SHELL 1 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. Part Number: WCT DIVISION 1721007-06 Description: HDMI/M - DVI (18+1)P/M UNIT: mm REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-25-07 01-25-07 JJH / 01-25-07