REVISION DESCRIPTION REV. DATE APPROVED 1830 ± 50 C5 P1 3 C2 C1 16 8 C4 C3 24 1 4 5 6 7 14 15 13 12 11 5 10 15 10 16 8 9 P2 2 17 9 1 1 3.8 ± 0.3 3.80 ± 0.3 HD15P/M MOLDED TYPE (MOLD NO: G102-154) FRONT No. SPECIFICATION STANDARD QTY BRONZE/GOLD FLASH SOLDER TYPE 17 2 DVI (12+5)P/M - INSULATOR PBT/BLACK UL 94V-0 1 3 DVI (12+5)P/M - SHELL STEEL NICKEL PLATED 1 4 DVI (12+5)P/M - CAN STEEL TIN PLATED 1 5 DVI (12+5)P/M - COVER 45P PVC/COLOR: BEIGE 1 6 THUMB SCREW #4-40 2.8x45, NICKEL PLATED 2 7 SCREW-MOLD 35P PVC/COLOR: BLACK 2 P2 8 HD15P/M - CONTACT BRASS GOLD FLASH SOLDER TYPE 15 PIN OUT 18 17 C1 C5 RED C2 GREEN C3 P1 1 C4 ORANGE 13 9 HD15P/M - INSULATOR PBT/BLACK UL 94V-0 1 8 BLUE 14 10 HD15P/M - SHELL STEEL NICKEL PLATED 1 15 BLACK 10 11 HD15P/M - INNER MOLD PE NATURAL 1 12 HD15P/M - COPPER FOIL WIDTH: 28mm 1 13 HD15P/M - OUTER MOLD 45P PVC/COLOR: BEIGE 1 14 HD15P/M - THUMB SCREW UNC #4-40 ∅4xL50, NICKEL PLATED 2 15 HD15P/M - SCREW-MOLD 35P PVC/COLOR: BLACK 2 16 CABLE DVI 12+5 UL20276 L03010ABK01A 1 17 MINI TIE PE/BLACK 2 18 POLYBAG PE/0.8x160x200 1 2 7 BLUE C5 6 7 P2 6 C5 3 8 WHITE YELLOW FRONT DVI (12+5)P/M - CONTACT TAPE P1 11 1 DVI (12+5)P/M ASS’Y TYPE 120 ± 20 PARTS NAME 6 15 12 5 14 RED 9 16 SHELL BRAID SHELL NOTES: 1. CABLE: UL20276 (28AWG+SP+FOIL)x3C+28AWGx4C+28AWGx1P+MYLAR+FOIL+BD OUTER JACKET BEIGE, OD: 6.5 ± 0.2 PRINTING: “E166307 AWM 20276 28AWG 80°C 30V VW-1 LOW VOLTAGE COMPUTER CABLE” 2. CONNECTORS: DVI(12+5)P/M-HD15P/M 3. HOOD: ASS’Y TYPE, COLOR: BEIGE 4. CABLE ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 3 ohm MAX. 5. PACKING: 1PC/POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 Qualtek Electronics Corp. WCI DIVISION Part Number: Description: 1321012-06 DVI (12+5)P/M - HD15P/M 18-50 0.50 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-05-07 01-05-07 JJH / 01-05-07