COLD SHRINK TUBING Qualtek Electronics QWCS SILICONE RUBBER COLD SHRINK TUBING Features/Applications Provides electrical insulation for all solid dielectric (rubber and plastic), insulated wire, and cable splicing rated to 36kV. Provides physical protection and moisture sealing for couplings, hoses, connectors, and terminal lugs. Cable jacket and sheath repairs. Environmental sealing for communication connectors and other non-electrical applications. Corrosion protection for fittings and couplings. Operating temperature: -60°C to +200°C Standard colors: Gray, Black RoHS Compliant Technical Data Property Density Hardness (shore A) Tensile Strength (MPa) Elongation (%) Tear Strength 48h/50°C/200% Tensile Rate Volume Resistance Dielectric Constant Dissipation Factor Arc track resistance Dielectric Strength Test Method Typical Data DIN 53479 DIN 53505 1.13 g/cm 40 ± 5 3 DIN 53504 DIN 53504 ASTM D 624B ASTM D 412 IEC 60093 IEC 60250 IEC 60250 IEC 60587 IEC 60243 > 10 MPa > 800% > 35 kN/m (N/mm) < 2% > 5.0X1015 Ω.cm 2.8 - 3.5 < 0.001 1A4.5 > 26 kV/mm Product Dimensions After Recovered (mm) Size (mm) 20 32 35 40 47 53 65 70 80 104 110 110 Inside Diameter 6 10 14 16 19 23 23 28 34 40 35 58 Wall Thickness 2 2 2 2 2 2 3 3 3 3.5 6 6 Application Range (mm) Length (mm) 8-15 12-25 16-28 18-33 21-40 25-46 25-55 30-60 36-70 42-94 37-100 60-100 450 490 450 450 470 500 500 500 500 430 430 430 Notes: 1. * See page 8 - Part Number Guide for standard packaging codes. 2. Cross Reference Guide located on page 1. 3. Special sizes, packaging, and cut pieces are available upon request. ISO-9001 Company www.qualtekusa.com