RFMD . ® Integrated Synthesizer/Mixer Solutions RFMD offers the widest portfolio of highly integrated frequency conversion devices designed to reduce development time, risk, and size in modern RF transmitters and receivers. They combine a high-performance fractional-N phased looked loop, wideband VCOs, LO buffers, and RF mixers on a single chip. The RF205x family has been optimized for low current consumption while providing a stable, low noise synthesizer with integrated upconversion and downconversion mixers. The RFFC207x and RFFC507x series take advantage of an advanced sigma-delta PLL modulator that delivers outstanding synthesizer phase noise performance with an RMS integrated phase error as low as 0.18 degrees at 1GHz. Designed to address the need for highly flexible and reusable solutions, these devices offer an extended LO tuning range and RF mixer frequency range and can be configured to work as signal sources by bypassing the integrated mixers. For applications requiring the use of multiple frequency converters, the novel “multi-slice” mode allows up to 4 devices to share a common serial bus without the need for separate chip-select control lines between each device and the host controller, saving cost and simplifying the final design. FEATURES • Fractional-N synthesizer with ultra-fine 1.5Hz step size and low spurious products • Very wideband low noise VCOs • 52MHz phase detector frequency • Programmable LO output dividers • Active high-linearity RF mixers with adjustable bias for low power operation • Full duplex mode (dual mixer versions) with minimum 60dB mixer-to-mixer isolation • Up to 6 general purpose outputs (RFFC family) • 3V supply voltage • Low current consumption • 3-wire serial programming interface • Applications include: CATV head-ends; multi-dwelling broadcast distribution systems; satellite IF channel stacking; point-to-point radios; GSM, CDMA, WCDMA, TD-SCDMA and LTE repeaters; frequency band-shifters; software defined radios SPECIFICATIONS Architecture Block Diagrams A, B, C LO Freq (MHz) Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 1 mixer Frac-N PLL, 1 mixer Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 1 mixer Frac-N PLL, VCO, 2 mixers Frac-N PLL, VCO, 1 mixer A B C A A A A B A B 300 to 2400 300 to 2400 external VCO 50 to 500 1900 to 2400 1550 to 2050 85 to 2700 85 to 2700 85 to 4200 85 to 4200 Phase Noise (dBc/Hz) at 2GHz 1kHz 10kHz -85 -85 -85 — -85 -85 -95 -95 -95 -95 A -90 -90 -90 — -90 -90 -102 -102 -102 -102 Mixer RF/IF Port Freq Range (MHz) Mixer IIP3 (dBm) Supply Voltage (V) Supply Current (mA) with one mixer active 30 to 2500 30 to 2500 30 to 2500 30 to 500 30 to 2500 30 to 2500 30 to 2700 30 to 2700 30 to 6000 30 to 6000 18 18 23 25 18 18 23 23 23 23 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.3 2.7 to 3.3 2.7 to 3.3 2.7 to 3.3 55 to 75 55 to 75 45 to 65 50 to 65 55 to 75 55 to 75 100 to 130 100 to 130 100 to 135 100 to 135 B Order RFMD® products online at www.rfmd.com/rfmdExpress. For sales or technical support, contact your authorized local sales representative (see www.rfmd.com/globalsales). Register to receive RFMD’s latest product releases with our Email Component Alerts at www.rfmd.com/emailalert. 7628 Thorndike Rd., Greensboro, NC 27409-9421 USA • Phone 336.664.1233 These products comply with RFMD’s green packaging standards. RFMD® is a trademark of RFMD, LLC. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2011 RFMD. MPG.Integrated Syn-Mix Solutions.0611.175 MultiSlice Mode — — — — — — P P P P C Part Number RF2051 RF2052 RF2053 RF2056 RF2057 RF2059 NEW RFFC2071 NEW RFFC2072 NEW RFFC5071 NEW RFFC5072