PLCC-2 Pkg Infrared Light Emitting Diode OP180 & OP280 Series Features: • SMD Package • High power GaAs—OP180, 940 nm typical peak wavelength • Standard GaAlAs-OP280, 890nm typical peak wavelength • High power GaAIAs—OP280K and OP280KT, 875 nm typical peakwavelength • VCSEL GaAlAs-OP280V, 850 nm typical peak wavelength • Point Source GaAlAs-OP280PS, 850 nm typical peakwavelength • LCC-2 package style with silicon encapsulation • Half Power Beam angle from 18° to 100° • Variety of power ranges • Suitable for single device or array applications • Moisture Sensitivity Level: MSL2 or > Description: The OP180 is a GaAs and the OP280 series are GaAlAs infrared LED mounted in plastic leadless PLCC-2 SMD package with a flat lens window that allows for wide beam angles. All parts endure the attribute of silicone encapsulation to increase the longevity of the product. The OP280V is a high performance 850nm vertical cavity surface emitting laser (VCSEL). This device requires substantially lower current to achieve same amount of output power as LEDS. Its high speed, high output makes it versatile with low input current. The OP280PS features a point source irradiance pattern, stable forward voltage over temperature and low rise and fall times, making it ideal for high speed operations. The OP280K and the OP280KT are high performance, high speed, high power IRLEDS. The OP280KT utilizes double hetero junction technology with reverse polarity terminals. The low power consumption PLCC-2 packaging is suitable for single device or array applications. The 180 and 280 Series LEDs are mechanically and spectrally matched to OP580 series phototransistors. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: • • • • Non-contact position sensing Datum detection Light curtains Photoelectronic sensors Ordering Information • • • • Machine automation Part Number Optical encoding Apertured IF Power (mW/cm2) (mA) LED Peak Half Power Wavelength Angle OP280K 0.85 20 875 nm OP280PS 0.15 20 850 nm 100° 100° 90° 90° 50° OP280V 2.50 7 850 nm 18° IR illumination OP180 0.50 20 940 nm Night vision systems OP280 0.50 20 890 nm OP280KT 0.85 20 850 nm 1 1 2 2 Pin #1 (Anode or Cathode OP280 OP280K OP280PS RoHS OP180 OP280KT OP280V Pin # OP180 OP280 1 Cathode Anode OP280KT OP280K OP280PS OP280V Cathode Anode Anode Cathode 2 Anode Cathode Anode Cathode Cathode Anode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 07/2012 Page 1 of 8 Infrared Light Emitting Diode OP180 & OP280 Series Absolute Maximum Ratings (TA=25° C unless otherwise noted) -40o C to +100o C Storage Temperature Range -25o C to +85o C 0o C to +70o C Operating Temperature Range—OP180, OP280, OP280K, OP280KT, OP280PS OP280V Reverse Voltage OP180, OP280, OP280PS, OP280V OP280K, OP280KT 5.0 V 4.0 V Peak Forward Current [ 1µs pulse width, 300 pps] (Except OP280V) 1.0 A 260° C(1) Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 130 mW(2) Power Dissipation Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS 0.50 0.50 0.65 0.65 0.10 1.50 - - VF Forward Voltage OP180 OP280 OP280K OP280KT OP280V OP280PS - 1.28 1.50 1.55 1.95 1.50 1.60 1.50 1.80 1.80 2.50 1.80 IR Reverse Current - - 100 λP Wavelength at Peak Emission OP180 OP280 OP280KT OP280PS, OP280K OPOP280V - 940 890 850 875 850 - Emission Angle at Half Power Points OP180, OP280, OP280K, OP280KT OP280PS OP280V - 100 90 18 - Degree° tr Output Rise Time OP180, OP280K, OP280KT, OP280PS OP280 OP280V - 500 700 - 100 ns ns ps tf Output Fall Time OP180, OP280K, OP280KT, OP280PS OP280 OP280V TEST CONDITIONS Input Diode EE (APT) θHP Radiant Incidence OP180 OP280 OP280K OP280KT OP280PS OP280V mW/cm2 V µA IF = 20 mA(3) IF = 20 mA(3) IF = 20 mA(3) IF = 20 mA(3) IF = 20 mA(3) IF = 7 mA(3) IF = 20 mA IF = 20 mA IF = 20 mA IF = 50 mA IF = 7 mA IF = 20 mA VR= 5.0 V IF = 20 mA nm IF = 7 mA IF = 20 mA IF = 20 mA IF = 7 mA IF(PK)=50 mA, PW=10 µs, and D.C.=10.0% IF(PK)=5 mA, PW=10 µs, and D.C.=10.0% (For OP280V) - 500 700 - 100 ns ns ps Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Derate linearly at 2.17 mW/° C above 25° C. 3. EE(APT) is a measurement of the apertured radiant incidence upon a sensing area 0.081” (2.06 mm) in diameter, perpendicular to and centered on the mechanical axis of the lens and 0.590” (14.99 mm) from the measurement surface. EE(APT) is not necessarily uniform within the measured area. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 07/2012 Page 2 of 8 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC-2 Pkg Infrared Light Emitting Diode OP180 & OP280 Series OP280 Forward Voltage vs Forward Current vs Temperature 1.6 -40°C -20°C 0°C +20°C +40°C +60°C +80°C +100°C Typical Forward Voltage 1.5 1.4 1.3 1.2 1.1 1 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) 3.5 Normalized at 50 mA and 20° C Normalized Optical Power 3.0 -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120° C 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 80 90 100 Forward Current IF (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 07/2012 Page 3 of 8 Infrared Light Emitting Diode OP180 & OP280 Series OP180 Optical Power—Ee vs Forward Current—IF vs OP180Temperature—T - I vs E vsA Temp. F 4.0 -40°C -20°C 0°C +20°C +40°C +60°C +80°C +100°C 3.5 3.0 Normalized EE E 2.5 Normalized @ +20°C, 20 mA 2.0 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 35 40 45 50 IF (mA) Forward Voltage—VF vs Forward Current—IF Temperature—TA OP180 - Ivs F vs VF vs Temp. 1.4 1.35 1.3 VF (Volts) 1.25 1.2 1.15 -40°C -20°C 0°C +20°C +40°C +60°C +80°C +100°C 1.1 1.05 1 0 5 10 15 20 25 30 35 40 45 50 IF (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 07/2012 Page 4 of 8 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC-2 Pkg Infrared Light Emitting Diode OP180 & OP280 Series OP280K OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 07/2012 Page 5 of 8 Infrared Light Emitting Diode OP180 & OP280 Series OP280KT OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 07/2012 Page 6 of 8 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC-2 Pkg Infrared Light Emitting Diode OP180 & OP280 Series OP280PS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 07/2012 Page 7 of 8 Infrared Light Emitting Diode OP180 & OP280 Series OP280V 2 Optical Power - Ee(mw/cm ) vs Forward Current - IF vs Temperature - TA 3.0 Ee - Relative Power Output 0°C 2.5 +20°C 2.0 +40°C +60°C 1.5 +80°C 1.0 0.5 0.0 0.0 1.2 2.5 3.7 4.9 6.1 7.4 8.6 9.8 11.0 12.3 IF - Forward Current (mA) Forward Voltage - VF vs Forward Current - IF vs Temperature - TA Typical Forward Voltage 2.2 2 1.8 0°C 1.6 +20°C 1.4 +40°C +60°C 1.2 +80°C 1 0.0 1.2 2.5 3.7 4.9 6.1 7.4 8.6 9.8 11.0 12.3 IF - Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 07/2012 Page 8 of 8 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com