Plastic Infrared Emitting Diode OP165, OP166 Series Features: • • • • • • T-1 (3 mm) package style Choice of narrow or wide irradiance pattern Choice of dome lens or flat lens Mechanically and spectrally matched to other OPTEK devices Higher power output than GaAs at equivalent drive currents 935 nm diode Description: Each device in the OP165 and OP166 series is a high intensity gallium arsenide infrared emitting diode (GaAIAs) that is molded in an IR transmissive clear or amber-tinted epoxy package with either a dome or flat lens. Devices feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T-1 package style makes these devices ideal for space-limited applications. OP165 and OP166 devices are mechanically and spectrally matched to the OP505 and OP535 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: • Space-limited applications • Applications requiring coupling efficiency • Battery-operated or voltage-limited applications Ordering Information Part Number Output Power (mW/ cm2) Min / Max OP165A 1.95 / NA OP165B 1.40 / 2.20 OP165C 0.85 / 1.60 OP165D 0.28 / NA OP165W RoHS LED Peak Wavelength 935 nm 0.50 / NA OP166A 1.95 / NA OP166B 1.40 / 2.20 OP166C 0.85 / 1.60 OP166D 0.28 / NA OP166W 0.50 / NA IF (mA) Typ / Max Total Beam Angle Lead Length 18° 20 / 50 90° 0.50" 18° 90° OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 07/06 Page 1 of 4 Plastic Infrared Emitting Diode OP165, OP166 Series OP165 (A, B, C, D) OP165W DIMENSIONS ARE IN: [MILLIMETERS] INCHES OP166 (A, B, C, D) OP166W 1 2 Pin # LED 1 2 Cathode Anode CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plastics. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 07/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Plastic Infrared Emitting Diode OP165, OP166 Series Absolute Maximum Ratings (TA=25°C unless otherwise noted) -40o C to +100o C Storage and Operating Temperature Range 2.0 V Reverse Voltage Continuous Forward Current 50 mA Peak Forward Current (1 µs pulse width, 300 pps) 3.0 A Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C(1) 100 mW(2) Power Dissipation Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX Apertured Radiant Incidence OP165A, OP166A 1.95 - - PO Radiant Power Output OP165W, OP166W 0.50 - - VF Forward Voltage - - IR Reverse Current - λP Wavelength at Peak Emission B UNITS TEST CONDITIONS Input Diode EE (APT) mW/cm2 IF = 20 mA(3) mW IF = 20 mA 1.60 V IF = 20 mA - 100 µA VR= 2 V - 935 - nm IF = 10 mA Spectral Bandwidth between Half Power Points - 50 - nm IF = 10 mA Spectral Shift with Temperature OP165, OP166 (A, B, C, D) OP165W, OP166W - ±0.30 - nm/°C Emission Angle at Half Power Points OP165, OP166 (A, B, C, D) OP165W, OP166W - 18 90 - Degree IF = 20 mA tr Output Rise Time - 1000 - ns tf Output Fall Time - 500 - ns ∆λP /∆T θHP IF = Constant IF(PK)=100 mA, PW=10 µs, D.C.=10.0% OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 07/06 Page 3 of 4 Plastic Infrared Emitting Diode OP165, OP166 Series OP165, OP166 (A, B, C, D, W) Forward Voltage vs Forward Current vs Temperature Optical Power vs IF vs Temp 4.0 1.8 Normalized at 20 mA and 20o C 1.7 3.5 -65°C -40°C -20°C +0°C +20°C +40°C +60°C +80°C +100°C +125°C 3.0 1.5 1.4 1.3 -65°C -40°C -20°C +0°C +20°C +40°C +60°C +80°C +100°C +125°C 1.2 1.1 1.0 Normalized Optical Power Typical Forward Voltage (V) 1.6 2.5 2.0 1.5 1.0 0.5 0.0 0.9 0 5 10 15 20 25 30 35 40 0 45 5 10 15 20 25 30 35 40 45 50 Forward Current IF (mA) Forward Current (mA) Relative Radiant Intensity vs Angular Displacement Distance vs Output Power vs Forward Current 9 1.0 Normalized at 0.6" and 50 mA 8 Forward Current Normalized Output Power 6 5 4 3 2 0.8 Relative Radiant Intensity 10 mA 20 mA 30 mA 40 mA 50 mA 60 mA 80 mA 100 mA 7 0.6 0.4 0.2 1 0.0 0 0.0 '' 0.2 '' 0.4 '' 0.6 '' 0.8 '' 1.0 '' 1.2 '' 1.4 '' 1.6 '' 1.8 '' 2.0 '' Distance (inches) -80 -30 20 70 Angular Displacement (Degrees) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 07/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com