Surface Mount PIN Photodiode OPR5910, OPR5913, OPR5915 Features: • • • • • Surface mountable High temperature operation Circular active area (OPR5910) Large area photodiode (OPR5913) 880 nm peak responsivity offers maximum coupling with OPTEK’s GaAIAs LEDs (OPR5910, OPR5915) Description: Each OPR5910, OPR5913 and OP5915 device is a silicon PIN photodiode enclosed in a compact polyamide chip carrier and is designed for open air communications and ambient light detection circuits. The custom opaque package shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering conditions, while the wraparound gold-plated solder pads offer exceptional storage and wetting characteristics. See Application Bulletin 237 for Handling Instructions. Ordering Information Applications: • • Part Receiver Number Type OPR5910 OPR5910T Photodiode OPR5913 OPR5915 Encoder applications Control applications # of Elements 1 Responsivity Reverse Voltage Active Area (mA/mW) Min. Min. (mm2) 0.45 35 0.75 0.45 35 0.75 0.40 10 26.00 0.45 35 7.80 Packaging Chip Tray Tape & Reel Chip Tray Tube OPR5910 Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. Pin # 1 2 3 4 OPR5913 OPR5915 Pin # Description Pin # Description 1 2 3 4 Anode Cathode Cathode NC 5 6 7 8 NC Cathode Cathode NC TOLERANCE IS ± .005 [0.13] Description Cathode Anode NC NC DIMENSIONS ARE IN: [MILLIMETERS] INCHES Pin # 1 2 3 4 5 6 Description Anode Cathode NC NC Cathode NC Pin # 7 8 9 10 11 12 Description NC Cathode NC NC Cathode NC OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 03/2012 Page 1 of 2 Surface Mount PIN Photodiode OPR5910, OPR5913, OPR5915 Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature -55° C to +125° C Reverse Breakdown Voltage OPR5910, OPR5915 OPR5913 35 V / minute 10 V / minute Solder reflow time within 5°C of peak temperature is 20 to 40 seconds(1) 250° C Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL R VBR PARAMETER Responsivity OPR5910, OPR5915 OPR5913 MIN TYP MAX UNITS 0.45 0.40 - - A/W 35 10 - - V nA Reverse Breakdown Voltage OPR5910, OPR5915 OPR5913 ID Reverse Dark Current OPR5910, OPR5915 OPR5913 - - 30 100 CT Capacitance OPR5910 OPR5913 OPR5913 OPR5915 - 25 1000 250 125 - Lx W Active Area OPR5910 OPR5913 OPR5915 - 0.75 26 7.8 - TEST CONDITIONS Ee = 10 µW, λ = 890 nm, V = 0 V IR= 100 µA VR= 10 V VR= 0.5 V VR = 0 V VR = 0 V VR = 10 V VR = 0 V pf mm2 (0.86 mm x 0.86 mm) (5.1 mm x 5.1 mm) (2.8 mm x 2.8 mm) Notes: (1) Solder time less than 5 seconds at temperature extreme. Spectral Responsivity Relative Response (%) 100 80 60 40 20 0 .4 .5 .6 .7 .8 .9 1.0 1.1 Wavelength (µm) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 03/2012 Page 2 of 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com