Silicon Photodiode in Top-View PLCC-2 Package OP980 Features: • • • • • • • • Wide acceptance angle, 100° Fast response time Linear response vs Irradiance Plastic leadless chip carrier (PLCC-2) Low Capacitance Top Sensing Area Tape and reel packaging Moisture Sensitivity Level: MSL2 or > Description: The OP980 is a high speed, low-noise and high sensitivity PIN silicon photodiode mounted in a miniature SMD package. The device has a flat window lens, which enables a wide acceptance angle at 100°. Due to its clear lens, the OP980 responds to visible and near infrared light. It is packaged in a plastic leadless chip carrier that is compatible with most automated pick and place mounting equipment. The OP980 is mechanically and spectrally matched to the OP280 and OP180 infrared LED. Applications: • • • • • Non-contact position sensing Datum detection Computer peripherals Smoke detectors Touch Sensors • • • • • Machine automation Ordering Information Optical encoders Reflective sensors Counters and sorters Miniature optical switches Package Outline Dimensions 1 Part Number Sensor Viewing Angle OP980 Photodiode 100° 1 2 2 Recommended Solder Patterns [MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS Pin # Transistor 1 Anode 2 Cathode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 5/10 Page 1 of 5 Silicon Photodiode in Top-View PLCC-2 Package OP980 Absolute Maximum Ratings (TA=25°C unless otherwise noted) -40o C to +100o C Storage Temperature Range -25o C to +85o C Operating Temperature Range 260° C(1) Lead Soldering Temperature Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IL Light Current 0.5 - - µA VR = 5.0 V, EE = 1.0 mW/cm2(3) ID Dark Current - - 60 nA VR = 30.0 V, EE = 0.0 mW/cm2(3) 60 - - V IR = 10 µA IF = 1 mA, Ee = 0.0 mW/cm2 VR(BR) Reverse Breakdown Voltage VF Forward Voltage - - 1.2 V λpk Peak Sensitivity Wavelength - 890 - nm VR = 5.0 tr Rise Time - 50 - ns VR = 5.0, RL = 1k tf Fall Time - 50 - ns VR = 5.0, RL = 1k Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Derate linearly at 1.33 mW/° C above 25° C. 3. Ee(APT) is an unfiltered GaAlAs LED with peak emission wavelength of 890nm. The measurement of the apertured radiant incidence upon a sensing area 0.081” (2.06mm) in diameter, perpendicular to and centered on the mechanical axis of the lens, and 0.590” (14.99mm) from the measurement surface. Measurement surface will be considered the tip of the top-view lens. Ee(APT) is not necessarily uniform within the measured area. Electrical Characteristic Performance Curves Spectral Responsivity vs. Wavelength— λ Typical Light Current—IL vs. Irradiance – Ee 0.9 0.8 Light Current—IL -(µA) Relative Radiant Sensitivity—(A/W)-% 1.0 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 400 500 600 700 800 900 λ—Wavelength—(nm) 1000 1100 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 Irradiance—Ee—(mW/cm2) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 5/10 Page 2 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Silicon Photodiode in Top-View PLCC-2 Package OP980 More Typical Performance Curves Total Capacitance—CT (pF) vs. Reverse Bias Voltage—VR (V) Total Capacitance—CT (pF) 5 . 0 E- 124 4 . 0 E- 123 3 . 0 E- 122 2 . 0 E- 121 1. 0 E- 120 0 5 10 15 20 Reverse Voltage—VR (V) Dark Current—ID vs. Irradiance 1.0 0.9 Dark Current—ID—(nA) 0.8 0.7 0.6 IR @ VR = 5.0V IR @ VR = 10.0V IR @ VR = 20.0V 0.5 0.4 0.3 0.2 0.1 0.0 -25° 0° 25° 50° 75° 100° Ambient Temperature—TA—(°C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 5/10 Page 3 of 5 Silicon Photodiode in Top-View PLCC-2 Package OP980 Reel Packaging Dimensions Dimensions are in: mm Tolerance: ±0.01 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 5/10 Page 4 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Silicon Photodiode in Top-View PLCC-2 Package OP980 Taping and Orientation • • Reels come in quantity of 2000 units. Reel diameter is 180mm. Tape Feed Direction OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 5/10 Page 5 of 5