PLCC4 Surface Mount LED OVSA1xBC2R8 Series High intensity with low power consumption PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.2 x 2.7 x 1.95 mm 120° viewing angle Product Photo Here The OVSA1xBC2R8 series is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications Traffic lights Signal and symbol luminaire Mono-color indicators Backlighting (LCD, switches, displays, illuminated advertising) Interior automotive lighting (instrumentation clusters) Safety marker lights (steps, exit ways) Amber Intensity Typ. mcd 1500 Water Clear InGaN Blue 550 Water Clear OVSA1GBC2R8 InGaN Green 1800 Water Clear OVSA1SBC2R8 AllnGaP Red 1600 Water Clear Part Number Material Emitted Color OVSA1ABC2R8 AlInGaP OVSA1BBC2R8 5a RoHS Lens Color DIMENSIONS ARE IN INCHES AND [ MM ] Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 02/2014 Page 1 of 7 PLCC4 Surface Mount LED OVSA1xBC2R8 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5V Continuous Forward Current Peak Forward Current (Pulse width ≤10 msec, duty cycle ≤10%) Power Dissipation Blue, Green 30 mA Red, Amber 70 mA Blue, Green 100 mA Red, Amber 200 mA Blue, Green 130 mW Red, Amber Thermal Resistance Junction to Solder 1. 210 mW Blue, Green 200° C/W Red, Amber 150° C/W Blue, Green Electrostatic Discharge Classification (MIL-STD-883E) Class 2 Red, Amber Moisture Sensitivity Level (IPC/JEDEC J-STD-020C) 5a / 24 hrs LED Junction Temperature 110° C Lead Soldering Temperature 250° C / 10 seconds Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size≥16 mm2) Electrical Characteristics (T A SYMBOL IV PARAMETER Luminous Intensity = 25o C unless otherwise noted) COLOR MIN TYP MAX Blue 355 550 ---- Green 1400 1800 ---- Red 1120 1600 ---- 1120 1500 ---- Amber VF IR λD Forward Voltage Reverse Current Dominant Wavelength Blue ---- 3.6 4.2 Green ---- 3.6 4.2 Red ---- 2.4 3.0 Amber ---- 2.4 3.0 Blue ---- ---- 10 Green ---- ---- 10 Red ---- ---- 10 Amber ---- ---- 10 Blue 460 470 480 Green 515 527 535 Red 618 624 630 584 591 599 Blue & Green Red & Amber 120 Amber 2Θ½H-H 50% Power Angle UNITS CONDITIONS IF = 30 mA mcd IF = 50 mA IF = 30 mA V IF = 50 mA µA VR = 5 V IF = 30 mA nm deg IF = 50 mA IF = 30 mA IF = 50 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 02/2014 Page 2 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Surface Mount LED OVSA1xBC2R8 Series Standard Bins LEDs are sorted to luminous intensity (IV) and dominant wavelength (nm) bins listed below. Each reel consists of a single intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (IV ) @ 30mA Dominant Wavelength (nm) BLUE: OVSA1BBC2R8 BLUE: OVSA1BBC2R8 IV Code Min (mcd) Max (mcd) nm Code Min Max 460 465 Tb 355 450 B3 Ua 450 560 B4 465 470 Ub 560 710 B5 470 475 Va 710 900 B6 475 480 GREEN: OVSA1GBC2R8 IV Code Min (mcd) GREEN: OVSA1GBC2R8 Max (mcd) nm Code Min Max Wb 1400 1800 G6 515 520 Xa 1800 2240 G7 520 525 Xb 2240 2800 G8 525 530 Ya 2800 3550 G9 530 535 Luminous Intensity (IV ) @ 50mA Dominant Wavelength (nm) RED: OVSA1SBC2R8 IV Code Min (mcd) Max (mcd) Wa 1120 1400 Wb 1400 1800 Xa 1800 2240 Xb 2240 2800 RED: OVSA1SBC2R8 nm Code Min Max RA 618 630 AMBER: OVSA1ABC2R8 IV Code Min (mcd) AMBER: OVSA1ABC2R8 Max (mcd) nm Code Min Max Wa 1120 1400 A2 584 587 Wb 1400 1800 A3 587 590 Xa 1800 2240 A4 590 593 Xb 2240 2800 A5 593 596 A6 596 599 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 02/2014 Page 3 of 7 PLCC4 Surface Mount LED OVSA1xBC2R8 Series Typical Electro-Optical Characteristics Curves OVSA1BBC2R8 (Blue) & OVSA1GBC2R8 (Green) Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Forward Current Relative Luminous Intensity vs. Wavelength Blue & Green Maximum Forward DC Current vs. Ambient Temperature Angular Distribution Blue & Green Reverse Current vs. Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 02/2014 Page 4 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Surface Mount LED OVSA1xBC2R8 Series Typical Electro-Optical Characteristics Curves for OVSA1SBC2R8 (Red) & OVSA1ABC2R8 (Amber) Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Wavelength Angular Distribution Relative Luminous Intensity vs. Forward Current Red & Amber Maximum Forward DC Current vs. Ambient Temperature Red & Amber Reverse Current vs. Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 02/2014 Page 5 of 7 PLCC4 Surface Mount LED OVSA1xBC2R8 Series Reflow Solder Profile Solder = Lead-Free Average ramp-up rate = 4°C / sec. max Peak temperature = 250°C max. Preheat temperature: 150 - 220°C Preheat time: 120 sec. max. Ramp-down rate = 6°C / sec. max. Time within 5°C of actual peak temperature = 10 sec. max Duration above 217°C is 60 sec. max OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 02/2014 Page 6 of 7 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Surface Mount LED OVSA1xBC2R8 Series Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded Quantity 2000 pieces per reel Moisture Resistant Packaging: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue D 02/2014 Page 7 of 7