Red Side-Emitting SMD LED (4 x 4 mm, 120° Viewing Angle) OVSR9RBCR8 x x x x x Compact size allows use in space conscious devices Thin profile offers unlimited design flexibility Long life span reduces maintenance cost Suitable for all SMT assembly methods Red (624 nm) Product Photo Here The OVSR9RBCR8 is a is a side-looking red 4.0 mm x 4.0 mm 120° angle surface-mounted LED that can be used as a light source in many applications. Its compact size and thin profile offer maximum design flexibility, while its long life span reduces maintenance cost. Applications x Optical indicators x Coupling into light guides x Back lights (LCD switches, keys, displays, illuminated advertising, general lighting) x Interior automotive lighting (dashboard backlighting, etc.) x Automotive applications x Marker lights (e.g., steps, exit ways, etc.) x Signal and symbol luminaire RoHS Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSR9RBCR8 AlGalnP Red 400 Water Clear Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 04/06 Page 1 of 4 Red Side-Emitting SMD LED OVSR9RBCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Junction Temperature Junction/Ambient 110° C 1 500° C/W Junction/Solder Point 350° C/W Reverse Voltage 5V Continuous Forward Current 50 mA Peak Forward Current (10% Duty Cycle, PW VHF 200 mA Power Dissipation 130 mW Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size 2 ). Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 280 400 ---- mcd IF = 20 mA VF Forward Voltage ---- 2.3 2.6 V IF = 20 mA IR Reverse Current ---- ---- 10 µA VR = 5 V Dominant Wavelength 620 628 635 nm IF = 20 mA 50% Power Angle ---- 120 ---- deg IF = 20 mA D 2 PARAMETER ½ Luminous Intensity (mcd) Standard Bins (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSR9RBCR8 may be filled with any or all bins contained as below. 560 450 U1 355 T2 280 T1 620 628 Luminous intensity is at T1 bin or above. Dominant Wavelength (nm) Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 04/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Red Side-Emitting SMD LED OVSR9RBCR8 Typical Electro-Optical Characteristics Curves VR -60 100.0 mA -50 -40 -30 -20 -10 0.0 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 mA 0.0 2.0 2.2 2.4 2.6 2.8 -50.0 3.0 V Reverse Current vs Reverse Voltage Forward Current vs Forward Voltage 500 100 400 Half Power WL = 23 nm 75 300 % % 50 200 25 100 0 0 20 40 60 80 100 0 400 500 600 700 800 nm mA Relative Luminous Intensity vs Forward Current Relative Luminous Intensity vs Wavelength 50% Power Angle: 120° 50% Power Angle: 120° mA 100 100 80 80 60 60 40 40 20 20 0 % 0 0 20 40 60 80 100 -90 -60 -30 °C Maximum Forward Current vs Ambient Temperature 0 30 60 90 °C Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 04/06 Page 3 of 4 Red Side-Emitting SMD LED OVSR9RBCR8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 500 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 04/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com